Amendments/modifications & additions in SION - DGFT - 38 (Re-2000)/1997-2002

Amendments/modifications additions in SION Public Notice No. 38 (Re-2000)/1997-2002 dated the 1st November, 2000 Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time. 2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended. 3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A-2475, the new entries from Sl.No.A-2476 to A-2482 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1548, the new entries from Sl.No.C-1549 to A-1574 shall be added as per Annexure "C" to this Public Notice. FOOD PRODUCTS After the existing entry at Sl.No.E-80, the new entry Sl.No.E-81 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS After the existing entry at Sl.No.H-421, the new entries Sl.No.H-422 to H-423 shall be added as per Annexure "E" to this Public Notice. TEXTILE PRODUCTS After the existing entry at Sl.No.J-331, the new entries from Sl.No.J-332 to J-333 shall be added as per Annexure "F" to this Public Notice. 5. This issues in public interest. Sd/- (N.L. Lakhanpal) Director General of Foreign Trade Issued by: Government of India Ministry of Commerce Industry Department of Commerce, New Delhi (F.No. 01/85/44/19/AM2001/DES-VI) Annexure "A" AMENDMENTS/CORRECTIONS Sl. No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 35 Chemicals Allied Products Sl.No.A175 The description of import item at Sl. No. 1 shall be amended to read as under:- "Propiophenone". 2. 46 Chemicals Allied Products Sl.No.A264 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A264 Ibuprofen (Neopentyl Glycol route) 1 kg 1. Isobutyl Benzene 2. Propionic Acid OR 2. a) 2-Chloro propionic Acid b) Thionyl Chloride OR 2. 2-Chloropropionyl Chloride 3. Neopentyl Glycol 4. Methylene Chloride/ Ethylene Dichloride/ Methanol 0.952 kg 0.897 kg 0.897 kg 1.07 kg 0.923 kg 0.89 kg 1.00 kg 3. 46 Chemicals Allied Products Sl.No.A265 The norm covered by this entry shall be substituted by Sl.No. Export Item Qty. Import Item Qty. Allowed A265 Ibuprofen (Nickel Sodium Cyanide Route) 1 kg 1. Isobutyl Benzene 2. Acetyl Chloride 3. Sodium Cyanide 4. Tetra Butyl Ammonium Bromide 5. Nickel Metal 6. Isopropyl Alcohol/ Methanol/ Methylene Chloride 0.952 kg 0.875 kg 0.809 kg 0.071 kg 0.042 kg 1.00 kg 4. 46 Chemicals Allied Products Sl.No.A266 The norm covered by this entry shall be substituted by Sl.No. Export Item Qty. Import Item Qty. Allowed A266 Ibuprofen (Sodium Metal Route) 1 kg 1. Isobutyl Benzene 2. Acetyl Chloride OR Acetic Acid 3. Sodium Metal 4. a) Monochloro Acetic Acid b) Isopropyl Alcohol OR 4. Isopropyl Chloro Acetate 5. Isopropyl Alcohol/Acetone 0.952 kg 0.714 kg 0.952 kg 0.285 kg 1.25 kg 0.952 kg 1.80 kg 1.00 kg 5. 161 Chemicals Allied Products Sl.No.A1250 The description of export item shall be amended to read as under:- "Liner Alkyl Benzene Sulphonic Acid". 6. 201 Chemicals Allied Products Sl.No.A1637 The quantity of import item at Sl. No. 1 shall be amended to read as under:- "0.952 kg". 7. 217-218 Chemicals Allied Products Sl.No.A1701 The following Note 2 shall be added below this norm:- "Note: 2. Within the total quantity of Natural/ Synthetic Rubber (SBR 1502/ 1712) at Sl. No. 1 of the SION, PBR shall be allowed upto 0.170 kg". 8. 263 Chemicals Allied Products Sl.No.A1969 The quantity of import item at Sl. No. 1 shall be amended to read as under:- "0.816 kg". 9. 269 Chemicals Allied Products Sl.No.A2016 The norm covered by this entry shall be deleted. 10. 269 Chemicals Allied Products Sl.No.A2017 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2017 Cefradine 1 kg 1. 7-ADCA OR Raw materials for 7-ADCA as per Sl. No. A-35 2. Hexamethyl Disilazane 3. Trimethyl Chlorosilane OR Trimethyl Guanidine 4. a) D(-) Dihydro Phenyl Glycine Base b) Methyl Aceto Acetate OR 4. D(-) Dihydro Phenyl Glycine Dane salt 5. Ethyl Chloroformate OR 5. a) 2,6 Lutidine b) Pivalyl Chloride 6. DMF Acetone 7. Activated Carbon 0.715 kg 0.198 kg 0.25 kg 0.706 kg 0.615 kg 1.06 kg 0.425 kg 0.03 kg 0.417 kg 2.85 kg 0.032 kg 11. 270-271 Chemicals Allied Products Sl.No.A2024 After import item at Sl. No. 8 the following items (with quantity) shall be added:- "9. Dimethyl Carbonate 2.25 kg 10. 2, Acetonitrile 1.62 kg". 12. 278 Chemicals Allied Products Sl.No.A2090 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2090 Benzyl Cyanides 1 kg 1. Benzyl Chloride OR Toluene 2. Sodium Cyanide 3. Soda Ash 4. Triethyl Amine 1.253 kg 1.06 kg 0.485 kg 0.019 kg 1.012 kg 13. 288 Chemicals Allied Products Sl.No.A2155 The norms covered by this entry shall be deleted. 14. 291-292 Chemicals Allied Products Sl.No.A2182 The description of import item at Sl. No. 7 (with quantity) shall be amended to read as under:- "7. Ethyl Acetate-4.50 kg OR Methyl Isobutyl Ketone (MIBK) - 3.754 kg". 15. 296 Chemicals Allied Products Sl.No.A2211 The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "1. Caustic Soda - 0.467 kg OR Soda ash" 16. 297 Chemicals Allied Products Sl.No.A2217 The description of export item shall be amended to read as under:- "Choline Di-Chloride (2-Chloroethyl Trimethyl Ammonium Chloride)". 17. 302 Chemicals Allied Products Sl.No.A2260 1. The description of export item shall be amended to read as under:- "Cephradine Arginine Sterile" 2. The description of import item at Sl. No. 4 (without any change in quantity) shall be amended to read as under:- "L-Arginine (Pyrogen Free)". 18. 311 Chemicals Allied Products Sl.No.A2319 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2319 Patent Blue V C. I. No. 42051 (Dye Content 89%) 1 kg 1. Meta Hydroxy Benzaldehyde 0.435 kg 19. 314 Chemicals Allied Products Sl.No.A2339 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2339 Patent Blue V C. I. No. 42051 (Dye Content 89%) kg 1. Meta Hydroxy Benzaldehyde 0.435 kg 20. 314 Chemicals Allied Products Sl.No.A2340 After import item at Sl. No. 2 the following item (with quantity) shall be added:- "3. Twitchel Oil - 0.02 kg/kg of export product". 21. 318 Chemicals Allied Products Sl.No.A2373 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2373 Sterile Ceftriaxone Sodium 1 kg 1. 7-ACA 2. 2,5-Dihydro-2- Methyl-3- Mercapto-5-oxo-6-Hydroxy 1,2,4-Triazine (TAA) 3. Boron Trifluoride Gas 4. Mercapto Benzothiazole-YL-2- (2-Amino-4-Thiazole) Methoxy Imino Acetate (MAEM) OR 4. (i) 2-(2-Amino-thiuazole-4-YL- Methoxyimino Acetic Acid Anhydrous (MIATA) (ii) Thio Bis Benzo Thiazole (PERKACIT) (iii) Triphenyl Phosphine (iv) Triethyl Amine (v) Methylene Chloride 5. Triethyl Amine 6. Acetonitrile/ Dimethyl Acetamide 7.Tetrahydro Furan 8. Acetone 9. Methylene Chloride 10. Sodium Ethyl Hexanoate 11. Activated Carbon 0.668 kg 0.36 kg 0.611 kg 0.81 kg 0.57 kg 1.16 kg 0.87 kg 0.28 kg 4.00 kg 0.514 kg 2.60 kg 1.23 kg 11.50 kg 2.00 kg 0.684 kg 0.100 kg 22. 13 Chemicals Allied Products Sl.No.A 2450 Introduced vide Public Notice No. 32 dt. 01.09.2000) The description of export item shall be amended to read as under:- "Roxarasone USP (3-Nitro-4- Hydroxyphenylarsonic Acid)". 23. 390-391 Electronics Products Sl.No.B-131 (i). The description of export item shall be amended to read as under:- "Telephone Instrument (Push Button Telephone) including CKD/SKD thereof ". (ii). At the end of this entry the following Note shall be added:- "Note: Various parts of Telephone instrument when exported in CKD/SKD condition should however be covered under single shipping bill evidencing export of complete telephone instrument". 24. 463 Engineering Product Sl.No.C252 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed C252 Paper covered Rectangular/ round Copper conductors 1 kg 1. Continuous Cast Copper Rods/ Bars/ Cathodes (EC Grade) 2. Insulating Kraft Paper 1.02 kg/kg content in the export product 1.02 kg/kg content in the export product 25. 498 Engineering Product Sl.No.C362 (i). The description of export item shall be corrected to read as under:- "Casing Pipes of OD 114.30 mm to 508 mm equivalent to 2-3/8" OD to 4-1/2" OD". (ii) The description of import item at Sl. No. 1 (without any change in quantity) shall be corrected to read as:- "1. Plain End Seamless Pipes of relevant Dia". (iii) After import item at Sl. No. 3 the following item (with quantity) shall be added:- "4. Cross Overs - Net to Net with accountability in the export product upto a maximum of 5 Nos.". 26. 498 Engineering Product Sl.No.C366 (i) The description of export item shall be corrected to read as under:- "Drill Pipes of OD 60.325 to 168.275 mm OD equivalent to 2-3/8" OD to 6-5/8" OD". (ii) The description of import item at Sl. No. 1 (without any change in quantity) shall be corrected to read as:- "1. Plain End Seamless Pipes of relevant Dia". 7. 505 Engineering Product Sl.No.C391 (i) The description of export item shall be corrected to read as under:- "Production tubing of OD 60.325 mm to 114.3 mm OD equivalent to 2-3/8" OD to 4-1/2" OD".(ii) The description of import item at Sl. No. 1 (without any change in quantity) shall be corrected to read as:- "1. Plain End Seamless Pipes of relevant Dia". (iii) After import item at Sl. No. 4 the following item (with quantity) shall be added:- "5. Cross Overs - Net to Net with accountability in the export product upto a maximum of 5 Nos.". 28. 641 Engineering Product Sl.No.C978 1. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "1. Phenol Formaldehyde Resin". 29. 642 Engineering Product Sl.No.C981 1. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "1. Phenol Formaldehyde Resin". 30. 642 Engineering Product Sl.No.C982 1. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "1. Phenol Formaldehyde Resin". 31. 740 Engineering Product Sl.No.C1408 (i) The description of export item shall be corrected to read as under:- "Steel Cable Drum in various sizes". (ii) The description of import at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "CRCA Non Alloy Steel Sheet/Coil". (iii) The description of import item at Sl. No.2 (without any change in quantity) shall be amended to read as under:- "2. HR Non Alloy Steel Sheet/Coil". 32. 740 Engineering Product Sl.No.C1409 The quantity of export item shall be corrected to read as under:- 1000 Kgs" 33. 6 Food Product Sl.No.E-11 as amended vide Public Notice No. 25 dt. 01/08/2000 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed E-11 Chutneys/condiments paste/ Vegetables/ pickles packed in OTS cans/ Glass containers/ packed in relevant packing material 1 kg 1. Tin plate (OTS quality) OR Relevant Tin Containers OR Relevant Glass Containers OR Relevant packing materials namely LDPE/HDPE/ PP Granules 2. OTS cans/Tin Corrugated Board other than Ivory Board 1.10 kg/kg weight of tin packing in the export product Net +1% wastage Net +1% wastage Net to net with 1% wastage 1.05 kg/kg weight of the relevant packing material Net +1% wastage 34. 6 Textile Product Sl.No.J21 as amended vide Public Notice No. 25 dt. 01/08/2000 After import item at Sl. No. 2 the following import item (with quantity) shall be added:- "3. Raw Cotton - 1.26 kg/kg content in export product". Sl.No. Export Item Qty. Import Item Qty. Allowed A2476 Betamethasone 17 valerate 1 kg 1. 9,11 Epoxide 2. Butyl Ortho Valerate 3. Charcoal 4. Potassium Hydroxide 5. Acetone 6. Ethyl Acetate 7. Methylene Chloride 1.10 kg 0.96 kg 0.10 kg 3.71 kg 1.13 kg 2.50 kg 3.52 kg A2477 DL-Naproxen 1 kg 1. Beta Naphtohol 2. Methanol 3. Acetyl Chloride 4. Nitromethane 5. Potassium Hydroxide 6. 2-Butanol 7. Hydroxyl Amine CH1 8. EDC 9. Toulene 2.50 kg 6.00 kg 1.38 kg 0.96 kg 1.73 kg 3.07 kg 1.03 kg 1.97 kg 1.64 kg A2478 Rubber Backed/ Embedded Coir Mat, Matting/ Rugs/Carpets 1 kg 1. Natural Rubber/ Synthetic Rubber (SBR-1502/1712) 2. Neoprene Rubber 3. Zinc Oxide 4. Carbon Black 5. Antioxident/ Accelerator/ Retarder/ Peptisizer 6. Misc. Chemicals : (Microcry-stallin wax Pigment and softners Sulphur- Stearic acid solvents, Plasticizers- Synthetic resins, bounding/ coupling agents activators fillers, dip chemicals (excluding resorcinol) mould release agents tackiffiers and catalysts and syloff. 0.655 kg of Rubber compound in the export product 0.025 kg 0.212 kg 0.170 kg 0.010 kg 0.042 kg Note: For import of item at Sl. No. (1) above the applicant shall furnish bifurcated quantities of Natural Rubber and Synthetic Rubber (SBR-1502/1712) in a ratio which does not exceed 0.655 kg rubber Compound for the export of 1 kg of resultant product. The exporter shall also get the consumption of similar ratio certified in the Shipping Bill of Export. A2479 Toluene Di Isocyanate(TDI) 1 kg 1. Toluene 2. Palladium Chloride Catalyst 0.668 kg 5.54 grams A2480 Meta Nitro Benzoyl Chloride 1 kg 1. Meta Nitro Benzoic Acid 1 kg A2481 Para Nitro Benzoyl Chloride 1 kg 1. Para Nitro Benzoic Acid 0.948 kg A2482 Zinc Dust 1 kg 1. Zinc 1.02 kg Sl.No. Export Item Qty. Import Item Qty. Allowed C1549 Pressure Cooker made of Aluminium Body Stainless Steel (AISI 304 Grade) Lid 1 kg 1. Aluminium Circles, commercial grade 2. Non magnetic Stainless Steel Sheets/ Coils AISI 304 grade 1/1.25 MM thick 1.07 kg/kg content in the export product 1.25 kg/kg content in the export product C1550 Carbon Steel (MS) Fabricated Tower Packings 1 MT 1. CRCA Carbon Steel (MS) Sheets/ Strips 1.02 MT per MT of export product. C1551 Floppy Diskettes Loaded with software (including information/data) 1 No. 1. Blank Floppy of Diskettes of relevant specification (including size) 1 No. C1552 Battery type HBL-SZ45 22.5V. 45 AH (Silver Oxide zinc air craft Batteries) 1 No. 1. Silver Ingots/ sheets OR Used life expired silver oxide zinc aircraft batteries 15 STS S 45 B or ABL/HBL SZ 45 2. Zinc Oxide 3. Nylon Moulding granules/ powder 4. Cellophane (C-19/350 P00) Regenerated Cellulose film 5. Grade-169-02 paper rolls/ filter reels 6. Metregrip 303 LV epoxy Adhesive acticator 7. Metregrip 303 LV epoxy Adhesive base 4.7527 kgs. 1.41 Nos. 3.81 kgs. 4.000 kgs. 1.05 kgs. 8.200SQM 0.040 Ltrs. 0.40 Ltrs. C1553 Battery type NCSP B 25150 (Nickel Cadmium Batteries) 24 Volts. 25AH 1 No. 1. Nickel fibremat fibrex OR Nickel Powder 2. Nylon Moulding granules type Zytel 151 NC 010 3. Nonwoven Separator (Viledon)FS 2115 4. Nickel Powder type 255/287/210 5. Celegard 3400 film 6. Battery Connectors 7. Metregrip 303 LV epoxy Adhesive acticator 8. Metregrip 303 LV epoxy Adhesive base 27.05 Sq.ft. 3.12 kgs. 3.70 kgs. 12.40 Sq/ Mtrs. 2.64 kgs. 6.20 Sq.Mtr. 1 No. 0.52 Ltrs. 0.52 Ltrs. C1554 Shock Absorbers for two wheelers/three wheelers 1 No. 1. Bump Stop (Hexagon RSI) 1 No. Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. C1555 Strut with Spring Assembly for Van 1 No. 1. Reverse DU Bush 2. Rod Seal 20 MM 3. Bushing 20 MM 1 No. 1 No. 1 No. Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. C1556 Shock Absorbers (Gas filled) for Multi Utility vehicle (MUV) 1 No. 1. Piston Rod Seal 1 No. Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. C1557 Shock Absorbers for Cars/Jeep-conventional 1 No. 1. M. L. Seal 1 No. Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. C1558 Circuit Breakers Upto including 200KVA 1 No. 1. Copper wire Rods/ cathodes 2. Copper Strips 3. Plain Copper stranded Flex round (Braided Copper) 4. Aluminium Sheets/ Ingots 5. CRCA Sheets 6. Thermostat Metals 7. Electrical Contact Buttons/ Square Buttons/ Round Buttons 8. Fasteners/Tab Nuts 9. Extension Springs 10. Secondary Latch Spring 11. Contact Arm Springs 1.01 kg/kg content in the export product 1 kg/kg content in the export product 1 kg/kg content in the export product 1.01 kg/kg content in the export product 1.01 kg/kg content in the export product Net to net Net to net Net to net Net to net Net to net Net to net Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No., if any), etc., of the components sought for import should conform to those utilised in the manufacture of the resultant product, which should be reflected in the export documents (shipping bills) also. C1559 12 Fiber Optical Fibre Armoured Cable Cable outer Dia: 13.8 MM +/- 1 MM 171 kg/km +/-5% Consisting of two PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 12.60 km 8.30 kg 0.17 kg 0.13 kg 5.74 kg 33.60SQ.MTR 90.74 kg 56.62 kg 2.91 kg 2.69 kg 1.05 KM 1.08 kg 1.05 KM C1560 24 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14 MM +/- 1 MM 173 kg/km +/-5% Consisting of two PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 25.20 km 8.30 kg 0.17 kg 0.25 kg 5.74 kg 36.75SQ.MTR 91.94 kg 56.62 kg 2.91 kg 2.69 kg. 1.05 KM 1.08 kg 1.05 KM C1561 48 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14 MM +/- 1 MM 177 kg/km +/-5% Consisting of four PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 50.40 km 16.59 kg 0.33 kg 0.50 kg 11.48 kg 36.75SQ.MTR 79.52 kg 56.62 kg 2.91 kg 2.69 kg. 1.05 KM 1.08 kg 1.05 KM C1562 72 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14.8 MM +/- 1 MM 212 kg/km +/-5% Consisting of six PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 75.60 km 24.89 kg 0.50 kg 0.75 kg 17.22 kg 39.90SQ.MTR 82.54 kg 64.71 kg 2.91 kg 4.03 kg. 1.05 KM 1.08 kg 1.05 KM C1563 96 Fiber Optical Fibre Armoured Cable Cable outer Dia: 16.3 MM +/- 1 MM 258 kg/km +/-5% Consisting of eight PBT Tubes of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 100.8 km 33.10 kg 0.66 kg 1.01 kg 22.96 kg 44.10SQ.MTR 102.15 kg 74.42 kg 2.91 kg 6.05 kg. 1.05 KM 1.08 kg 1.05 KM C1564 144 Fiber Optical Fibre Armoured Cable Cable outer Dia: 19.2 MM +/- 1 MM 348 kg/km +/-5% Consisting of 12 PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 151.2 km 49.78 kg 1.00 kg 1.52 kg 34.44 kg 60.90 SQ.MTR 141.71 kg 93.83 kg 2.91 kg 7.39 kg. 1.05 KM 1.08 kg 1.05 KM C1565 216 Fiber Optical Fibre Armoured Cable Cable outer Dia: 20.2 MM +/- 1 MM 411 kg/km +/-5% Consisting of nine PBT Tube of 4 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 226.8 km 68.06 kg 1.36 kg 2.28 kg 58.11 kg 69.30SQ.MTR 132.79 kg 119.71 kg 2.91 kg 7.39 kg. 1.05 KM 1.08 kg 1.05 KM C1566 288 Fiber Optical Fibre Armoured Cable Cable outer Dia: 24.6 MM +/- 1 MM 577 kg/km +/-5% Consisting of 12 PBT Tube of 4 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black 302.4 km 90.74 kg 1.81 kg 3.04 kg 77.48 kg 84 SQ.MTR 234.33 kg 135.89 kg 2.91 kg 14.78 kg. 1.05 KM 1.08 kg 1.05 KM C1567 18 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 95 kg/km +/-5% Consisting of 3 PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8.Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black 18.90 km 12.44 kg 0.25 kg 0.19 kg 8.61 kg 33.60 SQ.MTR 61.05 kg 3.63 kg 2.02 kg. 1.05 KM 0.72 kg 1.05 KM C1568 36 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 97 kg/km +/-5% Consisting of 3 PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black 37.8 km 12.44 kg 0.25 kg0.38 kg 8.61 kg 33.60SQ.MTR 61.05 kg 3.63 kg 2.02 kg. 1.05 KM 0.72 kg 1.05 KM C1569 48 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 103 kg/km +/-5% Consisting of 4 PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black 50.4 km 16.59 kg 0.33 kg 0.50 kg 11.48 kg 36.75SQ.MTR 54.85 kg 1.05 kg 1.05 kg. 1.05 KM 0.72 kg 1.05 KM C1570 72 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 12.2 MM +/- 1 MM 127 kg/km +/-5% Consisting of 6 PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black 75.6 km 24.89 kg 0.50 kg 0.75 kg 17.22 kg 39.90SQ.MTR 57.66 kg 2.91 kg 1.05 kg. 1.05 KM 0.72 kg 1.05 KM C1571 120 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 16.6 MM +/- 1 MM 206 kg/km +/-5% Consisting of 10 PBT Tube of 2.8 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black 126.00 km 41.48 kg 0.83 kg 1.05 kg 28.70 kg 50.40 SQ.MTR 106.57 kg 1.45 kg 6.05 kg. 1.05 KM 0.72 kg 1.05 KM C1572 216 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 19 MM +/- 1 MM 301 kg/km +/-5% Consisting of 9 PBT Tube of 4 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black 226.8 km 68.06 kg 1.05 kg 2.28 kg 58.11 kg 60.90 SQ.MTR 134.68 kg 1.05 kg 12.77 kg. 1.05 KM 0.72 kg 1.05 KM C1573 288 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 22.8 MM +/- 1 MM 412 kg/km +/-5% Consisting of 12 PBT Tube of 4 mm OD 1000 MTR=1 KM 1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black 302.4 km 90.74 kg 1.81 kg 3.04 kg 77.48 kg 69.00SQ.MTR 201.87 kg 1.45 kg 12.77 kg. 1.05 KM 0.72 kg 1.05 KM C1574 Bicycle Tube valve made of Brass 1 kg 1. Brass Scrap 1.20 kg per kg. of export product Sl.No. Export Item Qty. Import Item Qty. Allowed E81 Psyllium Husk/ powder/ Isabgol Husk/ powder 1 MT 1. Methyl Bromide 2. Ethylene Oxide 3. HDP/LDP/PP 4. Card Board/ Kraft Paper other than ivory board and white board 250 gms 50 gms 1.05 kg/kg weight of relevant packing 1.1 kg/kg weight of relevant packing Annexure "E" PLASTIC PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed H422 Nylon-6 Dipped Tyre Cord Fabric 1 MT 1. Nylon-6 Yarn 2. VP Latex 1.02 MT/MT 40 kg/MT H423 PVDC coated PVC film (containing 0.900 kg PVC film and 0.100 kg PVDC coating) 1 kg 1. PVC Film OR 1. a) PVC Resin b) Epoxidised Soyabean Oil c) PVC Stabilizer d) Pigment e) PVC processing aid f) PVC Impact modifier g) Lubricant 2. Coating materials 2. a) PVDC aqueous dispersion (Total solids 55+/-2%) b) Aqueous dispersion of vinylidene chloride) (Total Solid content 60+/-1%) a) Aqueous dispersion Vinylidenns chloride - Methacrylate Copolymer (TotalSolid Content 55+/-1%) OR 2. a) Primer - PVDC dispersions in ethyl acetate (Total solid content 50 +/-2%) b) Hardner - PVDC dispersions in ethyl acetate (Total solid content 75 +/-2%) c) Aqueous dispersion Vinylidene chloride-Methacrylate Copolymer (Total Solid Content 55+/-1%) d) Ethyl acetate solvent 0.0224 kg 0.1158 kg 0.0217 kg 0.0400 kg 0.990 kg 0.8217 kg 0.0545 kg 0.0297 kg 0.0049 kg 0.0158 kg 0.1010 kg 0.0119 kg 0.0204 kg 0.1447 kg 0.0217 kg Note: 1. In case of variation in the weight of PVC film, the qty of items of import at S. No. 1 or 1 (a to g) shall be worked out adopting the following: A x B/C Where A = Quantity allowed for 0.900 kg of PVC film. B = Weight of PVC film in one kg of export product. C = 0.900 Note: 2. Increase of variation in the weight of PVDC coating in the export product, the quantity of inputs at S. No. 2 (a to c) and 2 (a to d) shall be worked out by adopting the following: D X E /F Where D = quantity allowed for 0.100 kg PVC coating E = Weight of PVDC coating in the export product F = 0.100 Note: 3. In case of variation in the solid content of solid content at S. No. 2 quantity shall be worked out on pro-rata basis. Annexure "F" TEXTILE PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed J332 Ladies wrap skirt 1 No. 1. Fabrics to be used in the garment 1.5 sq. mtr. J333 Ladies Chemise 1 No. 1. Fabrics to be used in the garment 1.50 sq. mtr.