Effective rates of basic and additional customs duty on various goods. - 23/98 - Customs -Tariff

Effective rates of basic and additional customs duty on various goods. Notification No. 23/98-Cus. Dated 2-6-1998 In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods of the description specified in column (3) of the Table below or column (3) of the said Table read with the relevant List appended hereto, as the case may be, and falling within the Chapter, heading No. or sub-heading No. of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) as are specified in the corresponding entry in column (2) of the said Table, when imported into India, - (a) from so much of the duty of customs leviable thereon under the said First Schedule as is in excess of the amount calculated at the rate specified in the corresponding entry in column (4) of the said Table; (b) from so much of the additional duty leviable thereon under sub-section (1) of section 3 of the said Customs Tariff Act, as is in excess of the rate specified in the corresponding entry in column (5) of the said Table, subject to any of the conditions, specified in the Annexure to this notification, the condition No. of which is mentioned in the corresponding entry in column (6) of the said Table. Explanation. - For the purposes of this notification, the rate specified in column (4) or column (5), is ad valorem rate, unless otherwise specified. TABLE S. No. Chapter or heading No. or sub- heading No. Description of goods Standard Rate Additional duty Rate Condition No. (1) (2) (3) (4) (5) (6) 1. 1 Cows, heifers, bulls, goats, sheep, pigs, angora rabbits, ducklings and pureline poultry stock Nil - - 2. 1 Grand parent poultry stock and Donkey stallions 20% - - (1) (2) (3) (4) (5) (6) 3. 5 Pancreas Nil - - 4. 5 or any other Chapter The following goods, namely:-(1) Frozen semen; (2) Frozen semen equipment, namely :- (a) liquid nitrogen containers, flasks, refrigerators, vessels, jars or dewars, and their accessories; Plastic insemination sheath and insemination guns; and (b) Weaton Ampoules and straws for freezing semen. (c) Nil Nil - 5. 6, 7, 8 or 12 The following planting materials, namely, oil seeds, seeds of vegetables, flowers and ornamental plants, tubers and bulbs of flowers, cuttings or saplings of flower plants, seeds or plants of fruits, seeds of pulses Nil Nil 1 6. 8, 12, 13 or 15 to 21 All goods (excluding alcoholic preparations falling under sub-heading No. 2106.90) 25% - 2 7. 1301.90 Oleopine resin 10% - - 8. 15 Edible oils or any material from which edible oil can be extracted when imported upto and inclusive of the 31st day of March, 1999 Nil Nil 3 9. 15 Vegetable oils (other than coconut oil, RBD palm oil, RBD palm kernel oil and palm stearin) of edible grade, in loose or bulk form 20% - - 10. 17.01 Refined sugar including white crystal sugar, and raw sugar 5% - - (1) (2) (3) (4) (5) (6) 11. 1806.90 Food preparations meant for infant use and put up for retail sale, of - (I) flour, meal, starch or malt extract containing cocoa in a proportion by weight 40% or more but less than 50%, calculated on a totally defatted basis; or (II) goods of heading Nos. 04.01 to 04.04 containing cocoa in a proportion by weight 5% or more but less than 10%, calculated on a totally defatted basis 10% - - 12. 2106.90 All goods (excluding comp- ound alcoholic preparations of a kind used for the manufa- cture of beverages, of an alcoholic strength by volume exceeding 0.5 per cent. by volume, determined at a temperature of 20 degrees centigrade) 40% - - 13. 2203.00 All goods - Nil - 14. 22.04, 22.05 or 22.06 All goods - Rs. 9 per litre - 15. 2207.10 or 22.08 All goods - Nil - 16. 22 Wine, for use as sacramental wine 40% Nil 4 17. 2309.90 Prawn feed Nil - - 18. 23, 28, 29, 30 or 38 Veterinary drugs and other goods specified in List 1 10% - - 19. 25.03 Crude or unrefined sulphur Nil - - 20. 25 Spodumene ore, Strontium ore or Natural Boron ore 10% - - 21. 2620.19 All goods (excluding zinc dross) 10% - - (1) (2) (3) (4) (5) (6) 22. 2620.30 All goods (excluding copper mill scale) 10% - - 23. 27.01 Coking coal of ash content below 12% 3% - - 24. 2707.99 Carbon black feedstock 20% - - 25. 27.10 Kerosene, that is to say, any hydrocarbon oil (excluding mineral colza oil and white spirit) which has a smoke point of 18 mm or more (determined in the apparatus known as the smoke point lamp in the manner indicated in the Bureau of Indian Standards specification ISI : 1448 (P. 31)-1968 as in force for the time being) and is ordinarily used as an illuminant in oil burning lamps, and imported by the Indian Oil Corporation Limited for ultimate sale through the Public Distribution System Nil - - 26. 27.10 Naphtha Nil - - 27. 27.10 or 2714.90 All goods, for the manufacture of fertilisers Nil Nil 5 28. 2711.11 or 2714.90 All goods, for the purpose of power generation - Nil - 29. 28 or 29 Chemicals, for use in the manufacture of Centchroman Nil - - 30. 28 The following goods :- Radium and its salts; (i) radioactive isotopes of iodine, phosphorus, cobalt, (ii) caesium and all chemical compounds containing such radioactive isotopes; Molybdenum 99 and technetium 99m isotopes; (iii) Enriched uranium or uranium oxide. (iv) 10% - - (1) (2) (3) (4) (5) (6) 31. 28 Phosphoric acid, for the manufacture of fertilisers Nil Nil - 32. 28 Anhydrous ammonia, for the manufacture of fertilisers - Nil - 33. 28 Zirconium oxide or Yttrium oxide, for the manufacture of raw cubic zirconia 10% Nil - 34. 29 or 38 Gibberellic acid Nil Nil - 35. 29 DL-2 Aminobutanol, Diethyl Malonate, Triethyl orthoformate, Aceto Butyrolactone, Thymidine Nil - - 36. 29 Potassium penicillin G first crystals, potassium penicillin G crude, potassium penicillin V first crystals or penicillin V acid first crystals Nil - - 37. 29.22 L Lysine, L Lysine mono hydrochloride, DL Methionine or Methionine Hydroxy Analog 10% - - 38. 29 7-ACA 20% - - 39. 29 Methyl tertiary butyl ether 20% - - 40. 29 Epichlorohydrin 20% - - 41. 29 Codeine Phosphate or Narcotine, imported by Government Opium and Alkaloids Factories 20% - - 42. 29 The following goods, for the manufacture of Enzyme Linked Immunoabsorbent Assay Kits (ELISA Kits), namely :- (i) Plastic ELISA plates; Nil - 5 (1) (2) (3) (4) (5) (6) (ii) Deactivated positive control sera against human and animal diseases; (iii) Enzyme horse raddish peroxidase; (iv) Enzyme Alkaline phosphatase; (v) Enzyme glucose oxidase; (vi) Animal anti-human immunoglobins; (vii) Protein A or Protein A Gold Conjugates; (viii) Polystyrene latex beads; (ix) Deactivated enzyme labe- lled human anti-HIV reagent. 43. Any Chapter Raw materials, intermediates and consumables supplied by the UNICEF for the manufacture of DTP vaccines Nil Nil 6 44. 28, 29 or 30 Formulations or bulk drugs, namely :-Nilutamide, Sodium fusidate, Low molecular weight heparin or Erythropoietin. Explanation. - The expressions "bulk drug", "drug" and "formulation", shall have the meanings respectively assigned to them in the Drugs (Prices Control) Order, 1995, issued under section 3 of the Essential Commodities Act, 1955 (10 of 1955). 10% - - 45. 28, 29 or 30 Formulations or bulk drugs, namely, Ceftaxidime, Cefota- xime, Cisplatin, Melaginina, Measles vaccine, Vinblastine, Vincristine, Zidovudine, Alprostadil, Ceftria-xone, Carbencillin disod-ium, Estradiol patch, Lincomycin HCl, Pros taglandin F2 alpha (PGF2), Salazosulpha pyridine Sulphadoxine or Sulphamethoxy pyrazine. Explanation. - The expressions "bulk drug", "drug" and "formulation" shall have the meanings respectively assigned to them in the Drugs (Prices Control) Order, 1995, issued under section 3 of the Essential Commodities Act, 1955 (10 of 1955). 20% - - (1) (2) (3) (4) (5) (6) 46. 28, 29, 30 or 38 The following goods - (A) The life saving drugs or medicines (including diagnostic test kits) specified in List 2 Nil Nil - (B) Bulk drugs used in the manufacture of life saving drugs or medicines at (A) above Nil - 5 (C) Other life saving drugs or medicines Nil Nil 7 47. 29 Maltol, if imported for use in the manufacture of Deferiprone Nil - 5 48. 2902.43 Paraxylene 5% - - 49. 30 Homoeopathic medicines 20% - - 50. 30 Medicaments containing spirit - Nil - 51. 3102.10 Urea, for use as manure Nil - - 52. 31 Kyanite salts, in a form indicative of their use for manurial purpose Nil - - 53. 31 Muriate of potash, for use as manure or for the production of complex fertilizers Nil - - (1) (2) (3) (4) (5) (6) 54. 31 Ammonium phosphate or ammonium nitro-phosphate, for use as manure or for the production of complex fertilisers Nil - - 55. 3105.30 Diammonium phosphate, for use as manure or for the production of complex fertilizers Nil - - 56. 3104.30 Potassium sulphate containing not more than 52% by weight of K 2 O Nil - - 57. 31 Composite fertilizers Nil - - 58. 31 Potassium Nitrate, in a form indicative of its use for manurial purpose Nil - - 59. 32, 39 or 71 The following goods, namely :- Nil Nil 8 (i) Silver powder suspension of Chapter 32 or 71 (ii) Silicone resin and silicone rubber of Chapter 39 60. 3301.90 Extracted oleoresins 20% - - 61. 3302.10 All goods (excluding compound alcoholic preparations of a kind used for the manufacture of beverages, of an alcoholic strength by volume exceeding 0.5 per cent. volume, determined at 20 degrees centigrade) 40% - - 62. 34 Spin finish oil 30% - - 63. 35 Hydroxyethyl starch, imported for use in the manufacture of Plasma Volume Expanders 5% - 5 64. 35 Isolated soya protein 10% - - 65. 37 Film strips and film slides for educational purposes 10% Nil - 66. 37 Film of a predominantly educational character 10% Nil 9 (1) (2) (3) (4) (5) (6) 67. 37 Microfilms, of printed books (including covers for printed books), periodicals (including newspapers), music manu-scripts, maps, charts, plans, drawings and designs 10% Nil - 68. 37 Exposed and developed film sheets for printing or reproduction of printed books (including covers for printed books), periodicals (including newspapers), music manuscripts, maps, charts, plans, drawings and designs 10% Nil - 69. 37 Exposed cinematographic films 10% Nil 10 70. 37 Colour positive and colour negative unexposed cinema-tographic film in jumbo rolls 10% - - 71. 3701.20 or 3702.20 Instant print film - 8% - 72. 37 or 85 Films and video cassettes 10% Nil 11 73. 38 Lumulus Amebocyte Lysate (LAL) Test Kit 10% - - 74. 38 Dipping Oil, Paclobutrazol (Cultar) 10% - - 75. 38 Bio-pesticides, namely - 10% - - Bacillus thuringiensis var. kurstaki (i) Bacillus thuringiensis var. israelensis (ii) Bacillus sphaericus (iii) 76. 39.20 Subbed polyester base imported for the manufacture of medical or industrial X-ray films and graphic art films 20% - 5 77. 39 Dextran, imported for use in the manufacture of Plasma Volume Expanders 5% - 5 (1) (2) (3) (4) (5) (6) 78. 39 Saddle tree 5% - - 79. 39 or 74 Alatheon of Chapter 39 (i) Nil Nil 12 Copper wire of Chapter 74 (ii) 80. 39, 48 or any other Chapter Tags, labels, printed bags, stickers, belts, buttons or hangers, imported by bona fide exporters Nil Nil - 81. 39, 44, 45, 54,56 or 95 The following goods for use in the manufacture of sports goods, namely :- 10% - - Nylon gut falling under Chapter 39, 54 or 56; (1) Willow clefts, ashwood or beechwood falling under Chapter (2) 44; Cork bottoms falling under Chapter 45 or 95. (3) 82. 4012.10 Retreated tyres, of a kind used on aircrafts 3% - - 83. 41 Wet blue chrome tanned leather, crust leather, finished leather of all kinds, including splits and sides of the aforesaid Nil - - 84. 47 Wood pulp (excluding rayon grade wood pulp) derived by mechanical or chemical means from any fibrous vegetable material Nil - 13 85. 47.02 All goods 5% - - 86. 47.07 All goods - Nil - 87. 48 Grape guard, namely, paper of a type generally used for the packing of grapes and which consists of two sheets of treated white paper pressed together with thin rectangular pouches containing sodium meta-bi- sulphite, with kraft paper pasted thereto or a single paper coated with sodium meta-bi-sulphite, and which is used for the purpose of preventing fungal decay and thus helps prolonged storage in fresh condition, imported for use in the packing of grapes Nil Nil - (1) (2) (3) (4) (5) (6) 88. 48.01 Newsprint, having an ash content by weight not exceeding 8% 5% Nil - 89. 48.01 Newsprint, having an ash co-ntent by weight exceeding 8% 5% Nil - 90. 4802.60 Paper (excluding chrome paper, marble paper, flint paper, poster paper, stereo paper and art paper) containing mechanical wood pulp amounting to not less than 70 per cent. by weight of the total fibre content Nil Nil - 91. 48.10 Light weight coated paper weighing upto 51 g/m 2 , imported by actual users for printing of magazines 5% Nil - 92. 49 Commonwealth and International Reply Coupons and UNESCO Coupons Nil Nil - 93. 49 Greeting cards, diaries and calendars, and corresponding number of envelopes for such greeting cards, diaries and calendars, imported by the United Nations International Children's Emergency Fund (UNICEF) Nil - - 94. 49 Printed books (including covers for printed books) and printed manuals (including those in loose-leaf form with binder) Nil - - (1) (2) (3) (4) (5) (6) 95. 49 Cheque forms (including blank travellers cheques) 10% - - 96. 49.07 Printed Indian Bank Notes, imported by the Reserve Bank of India Nil Nil - 97. 49.11 Plans, drawings and designs Nil - - 98. 51.01 Raw wool, imported by a registered Apex Handloom Cooperative Society, a State Handloom Development Corporation, the Khadi and Village Industries Commission, a State Khadi and Village Industries Board or a registered Apex State Level Khadi Federation Nil - - 99. 51.01 Raw wool of average fibre diameter 32 microns and above 10% - - 100. 5303.10 Raw jute Nil - - 101. 5303.90 Jute waste (including yarn waste and garnetted stock) 25% - - 102. 53.01 Flax fibre 20% - - 103. 54.03 Acetate or cuprommonium filament yarn 20% - - 104. 55.02 Acetate tow 20% - - 105. 55.02 Viscose tow 25% - - 106. 55.04 or 55.07 Viscose staple fibre 25% - - 107. 63.02 Cotton terry towels 25% - - 108. 64 or any other Chapter The following goods for use in the leather industry, namely :-(1) Parts, consumables and other items specified in List 3(A) 20% - - (2) Other parts, consumables and items specified in List 3(B) 20% - 14 (1) (2) (3) (4) (5) (6) 109. 70.15 Ophthalmic blanks, for manufacture of optical lenses 20% - 5 110. 70.19 Glass fibre sewing thread and glass fibre filter cloth, for ma- nufacture of goods intended for pollution control purposes - 5% 15 111. 71 Industrial diamonds, whether natural or synthetic, in dust or in powder form 20% - - 112. 71 Raw pearls, other than cultured pearls; (ii) Rubies, (i) emeralds and sapphires, unset and imported uncut; (iii) Rough diamonds; (iv) Currnet coin of the Government of India. Nil Nil - 113. 71 Raw cultured pearls (including admixtures of pearls containing raw real pearls and cultured pearls) Nil - - 114. 71 Rough semi-precious stones Nil - - 115. 71 Ash and residues containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal 10% - - 116. 71 Foreign currency coins when imported into India by a Scheduled bank Nil Nil 16 117. 71.04 Rough synthetic stones 10% - - 118. 72 Hot rolled stainless steel coils 25% - - 119. 72 Tin mill black plate (TMBP) coils, for the manufacture of tin plates only 20% - - 120. 72.01 Pig iron 10% - - 121. 7202.60 Ferro-nickel 10% - - 122. 72.03 Hot briquetted iron (HBI) and sponge iron, imported by or on behalf of an electric arc furnace unit or induction furnace unit 20% - - 123. 72.04 Melting scrap of iron or steel (other than stainless steel or heat resisting steel), for use in electric arc furnace or induction furnace or melting in a hot blast cupola or for supply to a unit for use in electric arc furnace or induction 5% - 17 124. 72.06 Ingots 20% - - 125. 72.07 Billets, blooms and slabs containing by weight less than 0.6 per cent. of carbon 20% - - 126. 7204.21 Scrap of stainless steel, for the purpose of melting 5% - - 127. 72.04 Re-rollable scrap 20% - 18 128. 72.08 or 72.11 Iron or non-alloy steel hot rolled coils (flat rolled products in coils, not further worked than hot rolled, of not less than 1.5 mm. thickness, of a width exceeding 500 mm. and of a weight not less than 500 kgs. per piece), containing carbon content less than 0.6 per cent. by weight 25% - - 129. 72.18 Stainless steel slabs 20% - - 130. Any Chapter Coin blanks imported by a Mint of the Government of India Nil Nil 73 131. 72 or any other Chapter The horological raw materials specified in List 4 10% - 19 132. Any Chapter Machinery and tools specified in List 5 Nil - 20 133. 38 or 81 Graphite synthetic or cobalt alloy/metal powder, imported for the manufacture of diamond tools falling under Chapter 82 20% - 5 (1) (2) (3) (4) (5) (6) 134. 84 Fogging machines imported by a Municipal Committee, District Board, or other authority legally entitled to, or entrusted by the Government with, the control or management of a Municipal Fund, for use in combating malaria and other mosquito borne diseases Nil Nil - 135. 84 or 90 Goods specified in List 6, designed for use in the leather industry 5% Nil - 136. 84 or any other Chapter The following goods, when imported upto and inclusive of the 31st day of July, 1998, namely :- (A) Parts of fuel injection equipment (including those in semi-knocked down packs or completely knocked down packs) for manufacture of fuel injection equipment; (B) Parts of fuel injection equipment for providing warranty coverage or after sales service (free of cost or otherwise) to customers by the manufacturer of fuel injection equipment; (C) Parts (other than raw materials) for manufacture of goods specified at (A) above; (D) Machinery, tools and apparatus falling under Chapter 82, 84, 85 or 90 for manufacture of fuel injection equipment 20% - 21 137. Any Chapter namely :- (i) Wind operated electricity The following goods, generators upto 30 KW and wind operated battery chargers upto 30 KW 20% Nil 22 (ii) Parts of wind operated electricity generators, for manufacture of wind operated electricity generators, namely :- Nil Nil (a) Special bearings, (b) Gear box, (c) Yaw components, (d) Sensors, (e) Parts of the goods specified at (a) to (d) above. (iii) Parts of wind operated electricity generators, for manufacture of wind operat- ed electricity generators, namely :- (a) Brake hydraulics, (b) Flexi- ble coupling, (c) Brake calipers, (d) Wind turbine controllers, (e) Parts of the goods specified at (a) to (d) above. 20% Nil (iv) Blades for rotor of wind operated electricity generators, for manufacture of wind operated electricity generators 10% Nil (v) Parts and raw materials for manufacture of blades for rotor of wind operated electricity generators Nil Nil 138. Any Chapter Goods required for, - Nil Nil 23 (a) the substitution of ozone depleting substances (ODS);(b) the setting up of new capacity with non-ODS technology. Explanation : "Goods", for the purpose of this exemption means goods which are designed exclusively for non-ODS technology. (1) (2) (3) (4) (5) (6) 139. Any Chapter apparatus and appliances, as   (A) Machinery, instruments, well as parts (whether finished or not) or raw materials for the manufacture of aforesaid items and their parts, required for renovation or modernisation of a fertiliser plant; and (B) spare parts, other raw materials (including semi finished material) or consumables stores, essential for maintenance of the fertiliser plant mentioned above. Nil - 24 140. 84 Spinnerettes made, inter alia of Gold, Platinum and Rhodium or any one or more of these metals, when imported in exchange of worn-out or damaged spinnerettes exported out of India 20% - 25 141. 84, 85 The following goods, for manufacture of ground power units and air jet starters, - (1) Diesel engines of 2400 rpm; (2) Alternators of 400 Hz, 115/200 V and 2400 rpm; (3) Oil free dry screw compressor. 10% - - 142. 84 or any other Chapter The following goods, namely :- equipment, special tools, tackles,  (1) Plant, machinery, spares (including insurance spares), consumables and security surveillance systems imported by or on behalf of the Reserve Bank of Bhartiya Reserve Bank Note India or Mudran Private Limited for the setting up of New Nil Nil - (1) (2) (3) (4) (5) (6) Note Press projects at Salboni in West Bengal and at Mysore in Karnataka; (2) Plant, machinery, equipment, spares (including insurance spares) and consumables imported by or on behalf of the Reserve Bank of India or the Bhartiya Reserve Bank Note Mudran Private Limited for expansion and modernisation of the Currency Note Press at Nashik in Maharashtra and the Bank Note Press at Dewas in Madhya Pradesh. 143. 84 or any other Chapter The following goods, namely :- (a) Vacuum tube solar collectors, concentrating solar collectors, plastic collectors or stirling engines, for manufacture of solar energy equipments (b) Linear actuators for tracking systems, Fresnel lenses or sun sensors, for manufacture of concentrating solar collectors. 10% Nil - 144. 84 or 85 Spares, supplied with outboard motors for maintenance of such outboard motors 5% - 26 145. 84 or 85 Parts of outboard motors specified in List 7 Nil 13% 27 146. 84.82 Ball or roller bearings, of bore diameter of more than 60mm, and parts thereof 10% + Rs. 80 per Kg. - - 147. 8483.20 Bearing housings, incorporating ball or roller bearings, of bore diameter of more than 60 mm 10% + Rs. 80 per Kg. - - 148. 85.06 Button cells 10% - - 149. Any Chapter Raw materials or parts, for manufacture of button cells 10% - 5 150. 73, 84 or 85 Agricultural silos 20% - - 151. 8543.89 Complete ozone generators 10% - - 152. 8409.91 or 8409.99 All goods other than parts of goods falling under sub-heading Nos. 8407.31, 8407.32, 8407.33, 8407.34 or 8408.20 20% - - 153. 84.14 All goods, other than the following, namely :-(1) compressors of a kind for use in airconditioning and refrigeration equipment; (2) parts of compressors specified at (1) above. 20% - - 154. 8418.99 All goods, other than parts of goods falling under sub-heading Nos. 8418.10, 8418.21, 8418.22 or 8418.29 20% - - 155. 84.21 Catalytic convertors 5% - - 156. Any Chapter Parts of catalytic convertors, for manufacture of catalytic convertors 5% - 5 157. Any Chapter The following goods for manufacture of catalytic convertors and their parts, namely :- 5% - 5 (a) Palladium (b) Rhodium (c) Raw Substrate (ceramic) (d) Raw Substrate (metal) (e) Noble Metal Solution 158. 8422.90 All goods, other than parts of dish washing machines 20% - - 159. 84.48 All goods, other than parts of goods falling under sub-heading No. 8447.20 20% - - 160. 8450.90 Parts of goods falling under sub-heading No. 8450.20 30% - - (1) (2) (3) (4) (5) (6) 161. 8451.90 All goods, other than parts of dry-cleaning machines 20% - - 162. 8479.50,8479.89 Machinery for production of commodities 20% - - 163. 84 or any other Chapter Goods specified in List 8 required for use in a Green House 25% Nil 28 164. 84 or any other Chapter Goods specified in List 27 required for setting up crude petroleum refinery Nil 10% - 165. 84 or any other Chapter The following goods, namely :- (1) Kits required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven vehicles; - 5% 29 (2) Parts of the kits specified at (1) above. 166. 84 or any other Chapter Goods specified in List 28 required for construction of roads Nil Nil 74 167. 84 or any other Chapter Navigational, communication, air-traffic control and landing equipment and spares for maintenance of such equipment when imported by Airports Authority of India 20% Nil 30 168. 84 or any other Chapter Goods specified in List 9 required for the initial setting up of a hotel or for substantial expansion of a hotel 25% - 31 169. 72, 73, 84, 85 or 90 All goods, for renovation or modernisation of a power generation plant (other than captive power generation plant) 20% Nil 32 (1) (2) (3) (4) (5) (6) 170. 72, 73, 84, 85 or 90 All goods, imported by a manufacturer-supplier for the manufacture and supply of machinery and equipment to a power generation plant (other than captive power generation plant) 10% - 33 171. 85 Goods specified in List 29 required for basic telephone service 20% Nil 75 172. 84, 85 or 90 Goods specified in List 30 required for cellular mobile telephone service 20% Nil 76 173. 84, 85 or 90 Goods specified in List 31 required for radio paging service 20% Nil 77 174. 84 or 85 Goods specified in List 32 required for closed user's group 64 KBPS domestic data network via INSAT satellite system in extended C band 20% Nil 78 175. 84, 85or any other Chapter Parts of goods specified at S. No. 171 to 174 above 20% Nil 5 176. 84, 85 or 90 The machinery or equipment specified in List 10, required for textile industry 10% - - 177. Any Chapter Parts, for manufacture of the machinery/equipment specified in List 10 10% - 5 178. 84, 85 or any other Chapter Goods specified in, -(1) List 11(A) for on-shore or off-shore oil exploration or exploitation (2) List 11(B) for on-shore oil exploration or exploitation (3) List 11(C) for off-shore oil exploration or exploitation 20% 10% 34 (1) (2) (3) (4) (5) (6) 179. 84 or any other Chapter Parts and raw materials for manufacture of goods to be supplied in connection with the purposes of off-shore oil exploration or exploitation Nil Nil 35 180. 84 or any other Chapter Goods specified in List 12 req- uired in connection with petr- oleum operations undertaken under specified contracts Nil Nil 36 181. 84 or any other Chapter Goods specified in List 12 required in connection with petroleum operations undertaken under specified contracts under the New Exploration Licensing Policy Nil Nil 79 182. Any Chapter Goods required for the Hazira - Bijapur - Jagdishpur (H-B-J) Gas Pipeline Project 30% Nil 37 183. 68, 82 or 84 Moulds (including chasis for the manufacture of semi-conductor devices), tools (excluding tungsten carbide micro PCB drills) and dies, for the manufacture of electronic parts 25% - 38 184. 84, 85 or 90 The goods specified in List 13, for the manufacture of goods falling under heading Nos. 85.41 or 85.42 10% - - 185. 29, 30, 34, 37, 38, 39, 69, 84, 85, 90 or 94 (A) Medical equipment (excluding foley balloon catheter) specified in List 14; (B) Parts, for the manufacture of goods at (A) above and spare parts, required for the maintenance of the goods at (A) above 10% 10% Nil - - 39 (1) (2) (3) (4) (5) (6) 186. 84.71 or 85.04 Computer peripheral devices and power supply units supplying power under the control of computer system to which they belong, for the manufacture of computer systems to be supplied to a research institution only Nil Nil 40 187. 8471.70 Hard disk drive, floppy disk drive, compact disk-read only memory (CD-ROM) drive 5% - - 188. 8473.30 Parts (excluding populated printed circuit boards) or the machines of heading No. 84.71 10% - - 189. 84 or 85 Braille printer or braille e mbosser or braille display, specially designed for computer systems Nil - - 190. 85, 90 or any other Chapter Television equipment, cameras and other equipment for taking films, imported by a foreign film unit or television team Nil Nil 41 191. 28, 38, 85 or 98 The following goods, namely,- (A) Silicon in all forms, that is, polycrystalline silicon or ingots, for the manufacture of undiffused silicon wafers; 5% - 5 (B) Undiffused silicon wafers, for the manufacture of solar cells or solar cell modules; 10% - (C) Solar cells and modules for the manufacture of photo-voltaic systems; 20% Nil (D) Photo-voltaic systems for the manufacture of photo-voltaic applications. 30% Nil 192. 84, 85 or 90 The goods specified in List 15 20% - - 193. 28, 29,84, 85or 90 The goods specified in List 16, for the manufacture of laser and laser based instrumentation Nil Nil 42 194. 84, 85or 90 The goods specified in List 17 25% Nil 43 195. 85 (1) Newspaper page transm- ission and reception facsimile system or equipment;(2) Telephoto transmission and reception system or equipment. 25% Nil 44 196. 85 CNC Systems 20% - - 197. 85 or any other Chapter Parts of CNC systems 20% 5 198. 85 or 90 Closed Circuit Television system used as Low Vision Aid for visually handicapped persons 10% - - 199. 85 or any other Chapter Photographic, filming, sound recording and radio equipment, raw films, video tapes and sound recording tapes of foreign origin, if imported into India after having been exported therefrom Nil Nil 45 200. 85 One set of pre-recorded cassettes accompanying books for learning languages and essential complement to such books Nil - - 201. 8522.90 All parts 30% - - 202. 85 Compact disc mechanism 30% - - 203. 85.24 CD-ROMs containing books of an educational nature Nil Nil - 204. 8525.40 Digital still image video cameras 30% - - 205. 85.42 Integrated circuits of CIF value exceeding Rs. 1,000 per piece 5% - - (1) (2) (3) (4) (5) (6) 206. 49 or 85.24 The following goods, namely :-(i) Computer software, and (ii) Document of title conveying the right to use computer software (Computer licence) Explanation. - `Computer software' means any representation of instructions, data, sound or image, including source code or object code, recorded in a machine readable form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine falling under heading No. 84.71, but does not include software required for operation of any machine performing a specific function other than data processing and incorporating or working in conjunction with an automatic data processing machine. Nil - - 207. 85.24 Telecom software 30% - - 208. 85 Compact Disc-Read Only Memory (CD-ROM) 10% - - 209. 85 Floppy diskette 20% - - 210. 8540.11 All goods other than colour television picture tubes 20% - - 211. 85 or any other Chapter The wireless apparatus, accessories and parts specified in List 18, imported by a licensed amateur radio operator 20% Nil 46 212. 85 or any other Chapter Parts, sub-assemblies, SKD kits, CKD kits of Approach Surveillance Radar (ASR) and Mode-S Monopulse Secon- dary Surveillance Radar (MSSR) and spares for main- 25% - 47 (1) (2) (3) (4) (5) (6) tenance of such equipment, required for the modernisation of airport facilities 213. 85 or any other Chapter The following goods, namely :-(1) Mono or Bi polar Membrane Electrolysers and parts thereof including secondary brine purification components, jumper switches, filtering elements for hydrogen filters and any other machinery, required for modernisation of an existing caustic soda unit based on membrane cell technology 10% - 48 (2) Membranes for replacement of worn out membranes in an industrial plant based on membrane cell technology 214. 85 Video cassettes and video tapes, of a predominantly educational character Nil Nil 49 215. 85 Audio cassettes, if recorded with material from books, newspaper or magazines, for the blind Nil Nil - 216. 85.24 Recorded magnetic tapes, Compact Disc-Read only Memory (CD-ROMs) and floppy diskettes, imported by the University Grants Commisssion for use in computers Nil Nil 50 217. 85 Deflection components for use in colour monitors for computers 5% - - 218. 8540.40 Data or graphic display tubes, colour 5% - - (1) (2) (3) (4) (5) (6) 219. 85 or any other Chapter Goods imported for being tested in specified test centres Nil Nil 51 220. 87 Tricycles designed for use by crippled and disabled persons 10% - - 221. Any Chapter The goods specified in List 19, imported by the Fire Services administered by the Central Government or the Government of any State or the Administration of any Union territory or a local body for fire fighting operations Nil Nil 52 222. 88 Aeroplanes, helicopters, simulators of aeroplanes and gliders Nil - - 223. Any Chapter Parts of, aeroplanes, gliders, helicopters or simulators of aircraft (excluding rubber tyres and tubes for aeroplanes or gliders) 3% Nil 53 224. Any Chapter Raw materials -(i) for manufacture or servicing of aircraft falling under heading No. 88.02; (ii) for manufacture of parts of aircraft at (i) above. 3% Nil 54 225. Any Chapter The following goods, namely :- (i) Satellites and pay-loads brought into India for launch by Indian launch vehicles from Indian soil into Outer Space; (ii) Ground equipment bro- ught for testing of (i) above Nil Nil 72 226. 89 Barges imported along with ships for the more speedy unloading of imported goods and loading of export goods Nil Nil 55 (1) (2) (3) (4) (5) (6) 227. Any Chapter Capital goods and spares thereof, raw materials, parts, material handling equipment and consumables, for repairs of ocean-going vessels by a ship repair unit registered with the Director General of Shipping, Government of India Nil Nil 56 228. 89.01, 89.02, 89.04, 8905.10, 8905.90 or 89.06 All goods (excluding vessels and other floating structures as are imported for breaking up) Nil Nil 57 229. Any Chapter Raw materials and parts, for use in the manufacture of goods falling under heading Nos. 89.01, 89.02, 89.04, 89.05 (except 8905.20) or 89.06, in accordance with the provisions of section 65 of the Customs Act, 1962 (52 ot 1962) Nil Nil 58 230. Any Chapter Parts, for repair of dredgers Nil Nil - 231. 28, 29, 32, 39,70 or 90 The following goods, namely :- 5 (A) Goods specified in List 20(A), for the manufacture of telecommunication grade optical fibres or optical fibre cables; 10% - (B) Fibre reinforced plastic rods FRP, for the manufacture of telecommunication grade optical fibres or optical fibre cables; 20% - (C) Goods specified in List 20(B), for manufacture of telecommunication grade FRP. 5% - (1) (2) (3) (4) (5) (6) 232. 90.01 Optical fibre, for the manufacture of telecommunication grade optical fibre cables 25% - 5 233. 84, 85 or 90 The following goods, imported by an accredited press cameraman :- (i) Photographic cameras;(ii) cinematographic cameras; and (iii) lenses, filters, flash light apparatus and exposure meters required for use with the aforesaid cameras Nil Nil 59 234. 84, 85 or 90 The following goods, imported by an accredited journalist :-(i) Personal computers including lap top personal computers;(ii) typewriters; and (iii) fax machines Nil Nil 60 235. 90 or any other Chapter Medical and surgical instruments, apparatus and appliances including spare parts and accessories thereof Nil Nil 61 236. 90 or any other Chapter Goods specified in List 21 for live-stock breeding programmes 25% - 62 237. 90 Compressed air breathing apparatus, if imported for fire fighting service Nil Nil - 238. 90 Spare parts of hearing aids 10% - 63 239. 90 or 9804.90 Hearing aid appliances 10% - - 240. 90 or any other Chapter Parts (other than primary cells and primary batteries), for the manufacture of hearing aids including deaf aids 10% Nil 5 241. 90 External silicone breast prosthesis 10% - - (1) (2) (3) (4)  (5) (6) 242. 90.22 Linear accelerator with beam energy 15 MeV and above Nil - - 243. Any Chapter Hospital Equipment (equipment, apparatus and appliances, including spare parts and accessories thereof, but excluding consumable items) for use in specified hospitals Nil Nil 64 244. 90 or any other Chapter The following goods, namely :- (A) Medical equipment (excluding Foley Balloon Catheters) specified in List 22; Nil Nil - (B) Accessories of the medical equipment at (A) above; Nil Nil - (C) Parts required for the manufacture of the medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above. Nil Nil 39 245. 90 or any other Chapter Life saving medical equipment including accessories or spare parts or both of such equipment Nil Nil 65 246. 90 or any other Chapter Parts required for the manufacture, and spare parts required for the maintenance, of medical equipment falling under heading No. 90.18 to 90.21 and sub-heading Nos. 9022.12, 9022.13, 9022.14 or 9022.21 10% - 39 247. 90 or any other Chapter The following goods, namely :- (A) Medical equipment specified in List 23; Nil Nil - (1) (2) (3) (4) (5) (6) (B) Parts required for the manufacture of medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above. Nil Nil 39 248. 90 or any otherChapter The following goods, namely - (A) Medical equipment specified in List 24 (B) Accessories of the medical equipment at (A) above; Ni -l Nil Nil - Nil (C) Parts required for the manufacture of the medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above. Nil Nil 39 249. 90 or any other Chapter Goods for Tubal Occlusion specified in List 25 Nil Nil - 250. 3506.99,3901.10,3902.10, 7220.90, 7304.90, 7306.40 or 7306.90 The following goods for the manufacture of syringes and Adhesive epoxy grade needles falling under heading No. 90.18, namely :- (1) Low density polyethylene falling falling under sub-heading No. 3506.99; (2) Polypropylene falling under sub-heading No. under sub-heading No. 3901.10; (3) Stainless steel strip falling under sub-heading No. 7220.90; 3902.10; (4) Stainless steel capillary tube falling under sub-heading No. 7304.90, (5) 7306.40 or 7306.90 10% - 5 (1) (2) (3) (4) (5) (6) 251. 90 or any other Chapter Goods specified in List 26 imported by a handicapped or disabled person for his personal use Nil Nil 66 252. 91 or 9804.90 Braille watches and Braille one-day alarm clocks Nil - - 253. 91 Parts and cases, of Braille watches, for the manufacture of braille watches Nil - 5 254. 91 or any other Chapter Parts, for the manufacture of electronic modules (including semi-knocked down packs and completely knocked down packs) of digital, analogue, digi-ana and similar combination type eletronic wrist watches (watches which are designed primarily to show the time of the day, with or without additional features) 25% - 5 255. 95 Requisities for games and sports Nil Nil 67 256. 95 or any other Chapter Synthetic tracks and artificial surfaces of heading No. (i) Equipment requried for installation of (i) above. 95.06; (ii) Nil Nil 68 257. 97 Works of art created abroad by Indian artists and sculptors, imported on the return of such artists or sculptors to India Nil Nil - 258. 97.06 Books, being antiques of an age exceeding one hundred years Nil - - 259. 98 Orthopaedic appliances falling under heading No. 90.21, imported by post or air, for personal use 20% - - (1) (2) (3) (4) (5) (6) 260. 98.04 The following goods, imported by post or air, for personal use, namely :- (A) The life saving drugs or medicines (including diagnostic test kits) specified in List 2 Nil Nil - (B) Other life saving drugs or medicines Nil Nil 7 261. 98.01 Goods required for - 69 (i) fertiliser projects; Nil Nil (ii) coal mining projects; 20% Nil (iii) captive power plants of 5 MW or more; 20% 13% power generation projects including gas turbine power (iv) projects (excluding captive power plants set up by projects engaged in activities other than in power generation); 20% Nil other power transmission projects of 66 KV and above;(vi) (v) industrial plants or projects 20% 20% 10% 13% 262. 98.05 All goods 40% 18% - 263. Any Chapter Used bona fide personal and household effects belonging to a deceased person Nil Nil 70 264. Any Chapter Goods imported through postal parcels, packets and letters, the duty payable on which is not more than one hundred rupees Nil Nil - 265. Any Chapter Archaeological specimens, photographs, plaster casts or antiquities, intended for exhibition for public benefit in a museum managed by the Archaeological Survey of India or by a State Government Nil Nil 71 266. 99 All goods - Nil - ANNEXURE Condition No. Conditions 1 If the importer gives a declaration that such material is for the purposes of sowing or planting only. 2 If,-(a) import is made under a licence issued under Section J of Part-II of Chapter 15 of the Export and Import Policy 1st April 1997 - 31st March, 2002; (b) the importer at the time of clearance, furnishes a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Tourism to the effect that the goods imported are essential goods related to hotel and tourism industry and that the hotel or restaurant importing such goods is approved by that Ministry. 3 If the goods are donated as a gift free of cost and supplied under an agreement duly approved by the Government of India. 4 If the importer furnishes an undertaking to the Assistant Commissioner of Customs that the wine shall be used as sacramental wine. 5 If the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 6 If,-(a) the importer produces a certificate from a duly authorised officer of the UNICEF to the effect that the said raw materials, intermediates and consumables are required for the manufacture of DTP vaccines; and (b) the importer, at the time of clearance, furnishes an undertaking, in each case, to the effect that the said raw materials, intermediates and consumables shall be used only for the manufacture of DTP vaccines. 7 If,-(a) the goods are imported by an individual for personal use;(b) it is certified in the Form below, by the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi in each individual case, that the goods are a life saving drug or medicine; and (c) the importer produces the said certificate to the Assistant Commissioner of Customs at the time of clearance, or gives an undertaking as acceptable to the Assistant Commissioner to furnish the said certificate within such period as specified by the Assistant Commissioner, failing which to pay duty leviable thereon. FORM Certified that the drug/medicine .............................(name of the drug/medicine) being imported by ........ is a life saving drug/medicine and exemption from the payment of customs duty is recommended. Signature with date ............... Name ....................................... Designation............................. Place ......................................... 8 If, -(a) imported for the manufacture of solar cells or solar cell modules; and (b) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 9 If, the Central Board of Film Censors or, as the case may be, an officer not below the rank of a Director, All India Radio or Doordarshan, certifies that the said film is predominantly educational in character. 10 If certified by the Ministry of Defence that the film is predominantly educational in character and is meant for training of defence personnel. 11 If certified by the Ministry of Information and Broadcasting that the films and video cassettes are intended for archival study, or record and reference purposes. 12 If, - (a) imported for the manufacture of Copper-T Contraceptives; and (b) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 13 If, - (a) the wood pulp is imported for the manufacture of newsprint, that is to say, paper intended for the printing of newspapers, books and periodicals; (b) the newsprint manufactured in terms of (a) above is supplied to a newspaper; and (c) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. Explanation. - For the purpose of this condition, "newspaper" means a newspaper registered by the Registrar of Newspapers for India under the provisions of the Press and Registration of Books Act, 1867 (25 of 1867). 14 If at the time of importation, the importer, -(1) in all cases [excluding the case of the goods at item No. 9 of List 3(B)], produces a valid registration-cum-membership certificate issued by the Council for Leather Exports sponsored by the Government of India in the Ministry of Commerce; and (2) furnishes an undertaking to the Assistant Commissioner of Customs to the effect that -(a) the imported goods shall be used in the leather industry, or as the case may be, for the manufacture of leather chemicals to be used in the leather industry; (b) he shall maintain an account of the imported goods, received and consumed in the place of manufacture for the above purpose, in the manner specified by the said Assistant Commissioner; (c) he shall, within three months or such extended period as the said Assistant Commissioner may allow, produce the extract of the aforesaid account, duly certified by the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the goods, to the effect that the said goods have been used for the aforesaid purpose; and -(d) he shall pay, in the event of his failure to comply with the conditions above, an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 15 If, -(a) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996; and -(b) in respect of goods manufactured from the imported goods, the importer produces to the Assistant Commissioner of Central Excise having jurisdiction over his factory, within such period as the said Assistant Commissioner may allow, a certificate issued by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Environment and Forests to the effect that the said manufactured goods are intended for pollution control purposes. 16 If the said coins are imported with the approval of the Reserve Bank of India and are utilised for disbursement by the Scheduled bank in accordance with the regulations of the Reserve Bank of India, sanctioning foreign exchange for travellers. Explanation . - The expression "Scheduled bank" means the State Bank of India constituted under the State Bank of India Act, 1955 (23 of 1955), a subsidiary bank as defined in the State Bank of India (Subsidiary Banks) Act, 1959 (38 of 1959), a corresponding new bank constituted under section 3 of the Banking Companies (Acquisition and Transfer of Undertakings) Act, 1970 (5 of 1970) or any other bank, being a bank included in the Second Schedule to the Reserve Bank of India Act, 1934 (2 of 1934). 17 If, -(a) the importer furnishes an undertaking to the Assistant Commissioner of Customs that such melting scrap will be used for the purpose specified and in the event of his failure to comply with this condition, he shall be liable to pay, in respect of such quantity of the said scrap as is not proved to have been so used, an amount equal to the difference between the duty leviable on such quantity but for the exemption under this notification and that already paid at the time of importation; and (b) the importer produces to the said Assistant Commissioner, within six months or such extended period, as that Assistant Commissioner may allow, a certificate issued by the Assistant Commissioner of Central Excise in whose jurisdiction the said melting scrap of iron and steel has been used in electric arc furnace or induction furnace or melting in a hot blast cupola, that the said melting scrap has been so used. 18 If the re-rollable scrap consists of seconds and defectives or cuttings/rejected ingots/slabs/blooms/billets, bars, rods, angles, shapes and sections, rails and railway materials such as wheels, axles, sleepers, sleeper bars, fish plates and flat rolled products suitable for re-rolling without undergoing process of melting and of length 2000 mm. (maximum), width 800 mm. (maximum), thickness/diameter 8 mm (minimum). In case of rails and railway materials there will be no size restriction. 19 If, -(a) the horological raw materials are imported for the manufacture of parts of wrist watches (watches designed primarily to show the time of the day, with or without additional features), mechanical or quartz analog; and (b) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 20 If, -(a) the goods at (i) to (vi) in List 5 appended to the notification are imported for use in the flyash based building materials industry or the goods at (vii) to (xii) are imported for use in the phosphogypsum based building materials industry or the goods at (xiii) to (xviii) are imported for making clay-flyash bricks or the goods at (xix) to (xxvii) of that List are imported for production of pre-fabricated parts; (b) an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Urban Affairs and Employment certifies in each case that the said goods are for use in the industry specified above and recommends grant of the exemption; and (c) the importer furnishes to the Assistant Commissioner of Customs an undertaking to the effect that he shall use the goods for the purpose specified and in the event of his failure to do so, he shall be liable to pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 21 If the importer, at the time of importation, furnishes an undertaking to the Assistant Commissioner of Customs to the effect that he shall use the imported goods for the purposes specified in column (3) of the Table to this notification and that, - (a) in the case of the goods specified at (A), (B) and (C) in the said column (3), he shall within such period as the said Assistant Commissioner may specify in this behalf, produce a certificate from the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the fuel injection equipment, to the effect that the imported goods have been used for the purpose specified; (b) in the case of the goods specified at (D) in the said column (3), he shall not sell or otherwise dispose them off, in any manner, for a period of two years from the date of their importation and he shall within such period as the said Assistant Commissioner may specify in this behalf, produce a certificate from the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the fuel injection equipment, to the effect that the imported goods have been installed in the importer's own factory for use in the manufacture of fuel injection equipment. 22 If the importer at the time of importation, - (A) furnishes in all cases a certificate to the Assistant Commissioner of Customs, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources recommending the grant of this exemption and in the case of the goods at (ii) to (v) in column (3) of the Table to this notification, the said officer certifies that the goods are required for the specified purposes; and (B) furnishes an undertaking to the said Assistant Commissioner to the effect that, - (a) in the case of wind operated electricity generators upto 30 KW or wind operated battery chargers upto 30 KW, he shall not sell or otherwise dispose off, in any manner, such generators or chargers for a period of two years from the date of importation; (b) in the case of other goods specified at (ii) to (v) in column (3) of the said Table, he shall use them for the specified purpose; and (c) in case he fails to comply with sub-conditions (a) or (b), or both conditions, as the case may be, he shall pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 23 the project for substitution of ozone depleting If, - (a) substances (ODS) or the project for setting up of new capacity with non-ODS technology has been approved by the Steering Committee set up in the Ministry of the importer Environment and Forests for the clearance of such projects; and (b) furnishes in each case a list, of the goods required for the aforesaid projects, which is duly certified, to the effect that the goods mentioned in the said list are required for the aforesaid projects, by an officer not below the rank of a Deputy Secretary in the Ministry of Environment and Forests. 24 If an officer not below the rank of a Deputy Secretary to (1) certifies that the Government of India in the Department of Fertilisers - (i) the scheme for renovation or modernisation, as the case may be, of the fertilizer plant has been granted techno-economic clearance by the said recommends, in each case, the grant of exemption under this Department; (ii) Machinery, instruments, apparatus and appliances, as well notification to, - (a) as components (whether finished or not) or raw materials for the manufacture of aforesaid items and their components, required for renovation or modernisation spare parts, other raw materials (including semi of a fertiliser plant; and (b) finished material) or consumables stores, essential for maintenance of the fertiliser plant mentioned above, (hereinafter referred to as the said goods), certifies in each case, that the said goods are, or for such scheme; and (iii) the value of import of will be, required for the purposes specified above; (2) the goods specified at (b) above shall not exceed 10% of the value of imported if the importer furnishes an undertaking to goods specified at (a) above; (3) the Assistant Commissioner of Customs to the effect that the said imported goods shall be used for the purposes specified above and in the event of his failure to use the goods for such purposes, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 25 the spinnerettes acquired in exchange, are If, - (1) imported, within one year of the date of exportation of spinnerettes out of no drawback of duty has been paid on the occasion of their India; and (2) export. Explanation.- On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said spinnerettes were equal the cost of such exchange, that is to say, the aggregate of - to - (i) price charged for that quantity of gold, platinum and labour charges; (b) (a) rhodium, if any, which is in excess of the respective quantity of gold, platinum any or rhodium contained in the said spinnerettes exported out of India; and (c) other charges paid by the importer to the supplier of such spinnerettes for such the insurance and freight charges, both exchange of spinnerettes; and (ii) ways. 26 imported by a State Fisheries Corporation or any If, - (A) Fisheries Co-operative Federation recognised by the State Government; or imported by a person other than a State Fisheries Corporation or any (B) Fisheries Co-operative Federation recognised by the State Government concerned, the importer produces a certificate, from an officer not below the rank of - (i) a Deputy Secretary of the Department concerned with fisheries in the State Government, to the effect that the spares are being imported with outboard motors meant for fitment to boats which are exclusively used for fishing operations and that such spares are for the purpose of maintenance of the said the outboard motors and, recommending the grant of the concession; and (ii) importer furnishes an undertaking to the Assistant Commissioner of Customs at the said spares shall be used the time of importation to the effect that - (a) he shall pay on demand in the event of for the purpose specified above; and (b) his failure to comply with (a) above an amount equal to the difference between the duty leviable on the said spares but for the exemption under this notification and that already paid at the time of importation. 27 If imported by any State Fisheries Corporation or any Fisheries Co-operative Federation recognised by the State Government concerned. 28 If at the time of importation, the importer produces a certificate, from an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Commerce, to the effect that the imported goods are required for being used in a Green House. 29 If at the time of importation, the importer produces a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Environment and Forests, to the effect that the imported kits or parts thereof are required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven vehicles. 30 The importer at the time of clearance produces a certificate from the Chairman Airport Authority of India duly countersigned by an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Civil Aviation that the navigational, communication, air-traffic control and landing equipment and spares for maintenance of such equipment are required to be used for the modernisation of airport facilities and recommends the grant of exemption to the said goods. 31 at the time of clearance produces a If the importer, - (a) certificate from an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Tourism to the effect that the imported goods are required for initial setting up of a hotel or for substantial produces evidence expansion of a hotel, duly approved by that Ministry; and (b) to the satisfaction of the Assistant Commissioner of Customs within two years from the date of importation or within such extended period as the said Assistant Commissioner may allow, to the effect that the goods have been actually used for the purpose specified at (a) above. 32 in the case of a power plant (except a nuclear If, - (i) in the case of Central Power Sector Undertakings, the power plant),- (a) Chairman of the concered Undertaking certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid in other cases, an officer not below exemption to the goods for such scheme; (b) the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid in the case of nuclear power plant, exemption to the goods for such scheme; (ii) an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and recommends the grant of the aforesaid exemption to the goods for such scheme; in all cases, the importer furnishes an undertaking to the Assistant and (iii) Commissioner of Customs to the effect that the said goods shall be used for the purpose specified above and in the event of his failure to use the goods for the renovation or modernisation of the said power generation plant, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 33 in the case of small hydel power generation plants If, - (a) upto 3 MW station capacity, an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said hydel power generation plant and recommends in the case of nuclear the grant of this exemption to the imported goods; (b) power generation plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the quantity, description and technical specifications of raw materials and part required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and recommends the grant of this in case of power generation plants (except exemption to the imported goods; (c) in the case of Central Power Sector Undertakings, those specified above), - (i) the Chairman of the concered Undertaking certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant in other cases, an of the aforesaid exemption to the goods for such scheme; (ii) officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for in all cases, the importer furnishes an undertaking to the such scheme; and (d) Assistant Commissioner of Customs to the effect that the imported goods shall be used for the purpose specified above and in the event of his failure to use the goods for the purpose specified, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 34 If the importer produces, at the time of clearance of the goods, a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the said goods are essential for the purpose of oil exploration or oil exploitation (on-shore or off-shore). 35 the parts and raw materials are used in the If, -(a) manufacture of goods in accordance with the provisions of section 65 of the a certificate is produced in each c Customs Act, 1962 (52 of 1962); and (b)ase to the Assistant Commissioner of Customs from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the goods are required for the purposes of off-shore oil exploration or exploitation. 36 the goods are imported by an Indian Company or If, - (a) Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the "contractor") or a sub-contractor of the contractor and in each case in connection with petroleum operations to be undertaken under a contract with the where the importer is a contractor, he produces to the Government of India; (b) Assistant Commissioner of Customs, at the time of importation, the following, a certificate from a duly authorised officer of the Directorate namely :- (i) General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the a certificate, in the case of a contract referred to in that clause, and (ii) contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by such Foreign where the importer is a sub-contractor, he produces to Company or Companies; (c) the Assistant Commissioner of Customs, at the time of importation, the a certificate from a duly authorised officer of the following, namely :- (i) Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause and containing, the name of such an affidavit to the effect that such sub-contractor is a sub-contractor, (ii) bona-fide an undertaking from such sub-contractor of a contractor, (iii) contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by a certificate, such sub-contractor or contractor, as the case may be, and (iv) in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies : Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies. 37 imported by the Gas Authority of India Limited; and If, -(a) the importer produces a certificate issued by a duly authorised officer of (b) the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, certifying that the imported goods are essential for the purposes of the Gas Pipeline Project. 38 If the importer produces a certificate from an officer not below the rank of a Joint Director in the Department of Electronics, Government of India, mentioning the technical specifications, description and quantity of the moulds, tools and dies and certifying that they are required for the manufacture of electronic parts and recommending grant of exemption. 39 If the importer furnishes an undertaking to the Assistant the parts, or as the case may Commissioner of Customs, to the effect that -(a) be, the spare parts shall be used for the manufacture or maintenance, as the he shall, within three case may be, of the specified medical equipment; (b) months or such extended period that the said Assistant Commissioner may allow, in the case of parts, a certificate from the Assistant produce - (i) Commissioner of Central Excise having jurisdiction over the factory manufacturing the specified medical equipment, to the effect that the parts have in the been used in the manufacture of the specified medical equipment; or (ii) case of spare parts, necessary evidence to the satisfaction of the Assistant Commissioner of Customs to the effect that the spare parts have been used for he shall pay on the maintenance of the specified medical equipment; and (c) demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the parts or, as the case may be, spare parts, but for the exemption under this notification and that already paid at the time of importation. 40. If the research institution furnishes a certificate to the Assistant Commissioner of Customs from an officer not below the rank of a Joint Director in the Department of Electronics, Government of India, to the effect that imported computer peripheral devices and power supply units are required for the manufacture of computer systems to be supplied to the said institution and that it shall use the computer exclusively for research purposes and that it is not engaged in any commercial activity. 41. If an accredited representative of the foreign film unit or the television team executes a bond in such form and with such surety as may be acceptable to the Assistant Commissioner of Customs, binding himself to pay on demand an amount equal to the duty leviable on such equipment and cameras if the same are not placed under customs control for re-export within a period of three months or such extended period as the said Assistant Commissioner may permit, after clearance for home consumption. 42. furnishes a If the importer at the time of import - (1) certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy or a Director in the Department of Electronics, Government of India, to the effect that the imported goods (in respect of description, quantity and technical specifications) are required for the manufacture of laser and laser based instrumentation; and furnishes an undertaking to the Assistant Commissioner of Customs to the (2) effect that the imported goods shall be used for the above purpose and he shall pay, on demand, in the event of his failure to use the imported goods for the above purpose, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification and that already paid at the time of importation. 43. If the importer produces to the Assistant Commissioner of a certificate issued by an Customs at the time and place of importation, - (i) officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the an undertaking effect that the importer is an accredited news agency; and (ii) to the effect that the imported goods shall remain in possession, control and use of the agency and shall not be sold or parted with for a period of five years from the date of importation. 44. the goods are imported by a newspaper establishment If, - (a) registered with the Registrar of Newspapers for India appointed under section the 19A of the Press and Registration of Books Act, 1867 (25 of 1867); (b) importer at the time of import produces before the Assistant Commissioner of a certificate issued by the Registrar of Newspapers for India Customs - (1) an recommending the grant of exemption under this notification; and (2) undertaking to the effect that the imported goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation and in case the said goods are sold thereafter, the sale shall be subject to the permission granted by the Registrar of Newspapers for India. 45. the duties of customs leviable on the specified If, - (a) equipment, raw films and tapes had been paid at the time of their first no drawback of duty was paid on their exportation importation into India; (b) the identity of the goods is established to the satisfaction of from India; (c) the Assistant Commissioner of Customs at the time of availing of this the goods are re-imported into India within six months or such concession; (d) period not exceeding one year from the date of their export from India, as may be extended by the said Assistant Commissioner on sufficient cause being shown the External Publicity Division of the Ministry of to his satisfaction; and (e) External Affairs certifies that the purpose for which the goods had been exported from India was in public interest and had been sponsored or approved by the Government of India. 46. the total C.I.F. value of the wireless apparatus, If, - (a) accessories and parts, imported under this notification does not exceed seventy the total value of the parts imported under this five thousand rupees; (b) the importer at the time of clearance, exemption does not exceed Rs. 1,000; (c) produces a certificate from an officer not below the rank of an Assistant Wireless Adviser to the Government of India in the Ministry of Communications to the effect that the wireless apparatus, accessories and parts in respect of which this exemption is claimed are within the value limit specified above, and also recommending the grant of this exemption. Explanation. - "Licensed amateur radio operator" means a person duly authorised under the Indian Wireless Telegraphs (Amateur Service) Rules, 1978, made under sections 4 and 7 of the Indian Telegraph Act, 1885 (13 of 1885). 47. imported by M/s. Bharat Electronics Limited for If, -(a) the further manufacture and supply to the Airports Authority of India; and (b) importer at the time of clearance produces a certificate from the Director General of Civil Aviation that the imported goods are required to be used for the modernisation of airport facilities and recommends the grant of this exemption. 48. If the importer, at the time of importation furnishes an undertaking to the Assistant Commissioner of Customs to the effect that, - the imported goods shall be used for the specified purposes and shall not be (a) sold or otherwise disposed off in any manner for a period of at least two years in the event of failure to comply with (a) from the date of importation; and (b) above, he shall be liable to pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 49. for the Teleteach or If in the case of imports, - (1) Margdarshan Programme, the Managing Director of M/s. Electronic Trade and Technology Development Corporation Limited, certifies that the said cassettes and tapes are predominantly educational in character and the importer furnishes the certificate from the Central Board an undertaking to the effect that - (i) of Film Certification in the Form below, shall be produced within a period of three months or such extended period as the Assistant Commissioner of Customs he shall pay on demand, in the event of his failure to may allow; and (ii) comply with (i) above, an amount equal to the difference between the duty leviable on such quantity of said cassettes and tapes but for the exemption under this notification and that already paid at the time of importation; or (2) made by the Television Centre of All India Radio, the Director of the said Centre at New Delhi in the said Form, and in other cases, the Central Board of Film Certification, certifies in each case, that the video cassettes and video tapes in respect of which exemption is claimed are predominantly educational in character. FORM Certificate No.......... of 19....... This is to certify that the parcel containing the following video cassettes and video tapes was delivered to Shri......... Regional Officer/Assistant Regional Officer, CBFC at Mumbai/Calcutta/Chennai/the Director of the Television Centre of All India Radio, New Delhi, who examined the seals and identified the video cassettes and video tapes according to the particulars certified at the time of Customs examination, and that the Board/Director is satisfied that the video cassettes and video tapes are predominantly educational in character. Particulars of cassette/tape and film recorded thereon : Particulars of the producer : Length of Casette/Tape : Name of the importer : Date : Signature of Regional Officer/Assistant Regional Officer/Director, Television Centre, AIR, New Delhi. 50. If the importer, at the time and place of clearance, produces a certificate from an officer not below the rank of a Deputy -(a) Secretary to the Government of India in the Ministry of Human Resource Development, Department of Education, to the effect that the imported recorded magnetic tapes, CD-ROMs and floppy diskettes are recorded with educational or scientific material for use in computers and are required by Institutes or gives an Research Centres duly approved by the University Grants Commission; (b) undertaking to the Assistant Commissioner of Customs to the effect that such used for any other purpose and shall not be imported goods shall not be - (1) shall not be sold or subsequently recorded with any other material; and (2) parted with, without the prior permission of the Commissioner of Customs of the port of importation. 51. the goods are imported for being tested in - If, - (1) Defence Research and Development Organisation (DRDO) laboratories; (a) Council for Scientific and Industrial Indian Institutes of Technology; (c) (b) Central Power Research Institute, Bangalore; Research (CSIR) laboratories; (d) Any other test centre approved by any Ministry in the Government of India or (e) the Head of the any organisations specified above for this purpose; and (2) certifies that the goods have been imported by that organisation only for the purpose of testing and shall not be used or sold after such testing. 52. The importer at the time of clearance, produces a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Home Affairs that the goods specified in List 19 appended to this notification are required for fire-fighting operations by any of the specified Fire Services and recommends grant of the exemption. 53. If the parts are required for manufacture or servicing of aeroplanes, gliders, helicopters, or simulators of aircraft. Explanation. - "Parts of aeroplanes, gliders, helicopters or simulators of aircraft" shall include engines, engine parts, wireless transmission apparatus, wireless receivers, iron and steel washers and screws, ball and roller bearings and other parts. 54. If an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Civil Aviation certifies in each case the description and quantity of such raw materials which are required for the manufacture or servicing of the specified aircraft or parts of such aircraft, as the case may be. 55. the importer makes a declaration at the time of If, - (a) the barges are re-exported, by import that the barges would be re-exported; (b) the same ship which brought them or by any other ship under the same shipping agency, within two months of the date of importation or such extended period as the importer executes a the Assistant Commissioner of Customs may allow; and (c) bond, in such form and for such sum as may be specified by the Assistant Commissioner of Customs, binding himself to pay that sum if the re-export does not take place within the period specified under condition (b) above. 56. the importer maintains a proper account of i If, - (a)mport, use and consumption of the specified goods imported for the purpose of repairs of ocean-going vessels and submits such account periodically to the Commissioner of Customs in such form and in such manner as may be specified by the said the importer, by the execution of bond, in such form and for Commissioner; (b) such sum as may be specified by the said Commissioner, binds himself to pay on on the capital goods or spares demand an amount equal to the duty leviable, -(1) thereof or material handling equipment, as are not proved to the satisfaction of the said Commissioner to have been installed or otherwise used for the aforesaid on parts, raw material and consumables, as are not proved to the purpose; (2) satisfaction of the said Commissioner to have been used or consumed for the aforesaid purpose, within a period of three months from the date of importation thereof or within such extended period as that Commissioner, on being satisfied that there is sufficient cause for not installing, using or consuming them, as the case may be, for the aforesaid purpose within the said period, allow. Explanation. - liners; cargo-vessel "Ocean going vessels" includes - (a) of various kinds including refrigerator vessels for the transport of meat, fruit or the like, vessels specified for the transport of particular goods (grain, coal, ores or the like); tankers (petrol, wine or the like); yachts and other sailing vessels; cable ships; ice-breakers; floating factories of all kinds (for processing whales, preserving fish or the like) whale catchers; trawlers and other fishing vessels; life boats, scientific research vessels; weather ships; vessels for the transportation or mooring of buoys; pilot-boats; hopper barges war ships of all kinds for the disposal of dredged material or the like; (b) tugs, dredgers, fire-floats and salvage including submarines; (c) ships. 57. If the vessels and other floating structures are intended to be broken up after their importation, the importer shall present a fresh bill of entry to the Commissioner of Customs, and thereupon such goods shall be chargeable with the duty which would be payable on such goods as if they were entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such goods. 58. If any of the goods manufactured from the imported raw materials and parts, are subsequently intended to be broken up, a bill of entry in respect of such manufactured goods shall be presented to the Commissioner of Customs and thereupon these goods shall be chargeable with the duty which would be payable as if such manufactured goods had been imported and entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such manufactured goods. 59. If the importer produces a certificate from an officer (i) not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited press cameraman, and that the importer has not availed, on any occasion in the previous five years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue) No. 52/85-Customs, dated the 4th March, 1985 or No. 36/96-Customs, dated the 23rd July, 1996 or No. 11/97-Customs, dated the 1st the exemption under this notification shall be applicable to March, 1997; (ii) that portion of C.I.F. value of the specified cameras, lenses and other goods if the importer gives an which does not exceed Rupees one lakh; (iii) undertaking to the Assistant Commissioner of Customs at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation. 60. If the importer produces a certificate from an officer (i) not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited journalist, and that the importer has not availed, on any occasion in the previous five years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue) No. 83/93-Customs, dated the 28th February, 1993 or No. 36/96-Customs, dated the 23rd July, 1996 or No. 11/97-Customs, dated the the exemption under this notification shall be applicable 1st March, 1997; (ii) to that portion of C.I.F. value of the specified personal computers, typewriters if the importer and fax machines, which does not exceed one lakh rupees; (iii) gives an undertaking to the Assistant Commissioner of Customs at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation. 61. imported by any Department or Ministry of the If, - (a) the importer produces a certificate from an officer Government of India; and (b) not below the rank of a Joint Secretary to the Government of India in the concerned Department or Ministry, certifying that the said goods are being imported under an agreement relating to Government to Government Assistance Programme with any other country. 62. If an officer not below the rank of a Deputy Secretary in the Department of Animal Husbandry and Dairying in the Ministry of Agriculture, Government of India, is satisfied that the imported goods are required for the purpose of live-stock breeding programmes and certifies to this effect and recommends grant of the exemption. 63. essential for the working of If the said parts are, - (a) hearing aids and have been given for that purpose some special shape or quality imported by or which would not be essential for use for any other purpose; (b) on behalf of an association for the handicapped or by a handicapped person for his own use. 64 the Central the hospital is run by - (1) If, - (a) Government, a State Government, a Union territory Administration or a Local institutions established by or under any law for the time Authority; or (2) societies registered under any law for the time being in being in force; or (3) force relating to registration of societies, such societies being controlled by the importer produces a any of the authorities mentioned in (1) above; (b) certificate, from the Directorate General of Health Services to the Government of India or the Ministry of Health and Family Welfare in the Government of India, to the effect that the said hospital falls in either of the categories the head of the hospital certifies in each case specified at (a) above; and (c) that the hospital equipment is meant for use in the hospital and is not being manufactured in India and is essential for running or for maintenance of the hospital. Explanation. - "Hospital" includes any Institution, Centre, Trust, Society, Association, Laboratory, Clinic and Maternity Home, which renders medical, surgical or diagnostic treatment. 65 produces a If the importer at the time of importation, - (a) certificate from the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, in each case, in the Form below; furnishes an undertaking acceptable to the Assistant Commissioner of or (b) Customs to the effect that the aforesaid certificate shall be produced before the said Assistant Commissioner within the period specified by the Assistant Commissioner, failing which he would pay the duty leviable thereon. FORM Certified that the medical equipment/accessory/spare part .............. (name to be specified) being imported by .................. is a life saving medical equipment, accessory or spare part and exemption from payment of customs duty is recommended. Signature with date of Director General/ Deputy Director General/ Assistant Director General, Health Services, New Delhi 66 If the importer produces to the Assistant Commissioner of Customs, at the time of importation, a certificate from the Civil Surgeon or the District Medical Officer or the Administrative Medical Officer or the Director of Health Services of the concerned State or a Specialist in the concerned speciality attached to a Government Hospital or a recognised medical college to the effect that the importer suffers from the particular handicap or disability and that the imported goods in respect of which the exemption is claimed are essential to overcome the said handicap or disability. 67 If certified by the apex body in relation to the concerned game or sport (the highest organisation, other than Government, by which the game or sport is controlled or regulated), that the requisites for games and sports are required to be used in a national or international championship or competition to be held in India or abroad. 68 the synthetic tracks and artificial surfaces and If, - (a) equipment required for their installation are imported under the "Scheme for Laying Synthetic Tracks and Artificial Surfaces" of the Department of Youth the importer, at the time of import Affairs and Sports, Government of India; (b) produces before the Assistant Commissioner of Customs a certificate from (1) - an officer not below the rank of a Deputy Secretary to the Government of India in the said Department certifying that the import of the said tracks and surfaces is under the "Scheme for Laying Synthetic Tracks and Artificial gives an (2) Surfaces" and also recommending the grant of the exemption; and undertaking to the effect that the equipment imported for installation of the said tracks and surfaces shall be re-exported within a period of six months from the date of importation, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 69 In the case of goods required for the specified projects, the exemption under this notification shall not affect the exemption granted under any other notification of the Government of India in the Ministry of Finance (Department of Revenue) in so far as it relates to the duty of customs leviable under the First Schedule to the Customs Tariff Act, 1975 (51 of 1975). 70 If a certificate from the Indian Mission concerned, about the ownership of the goods by the deceased person, is produced at the time of clearance of the goods through Customs station. 71 If the imported goods are meant to be exhibited in a museum the Archaeological Survey of India, such goods shall be managed by, - (a) imported under cover of a certificate issued by the Director General of a State Government, such goods shall be imported Archaeology in India; or (b) under cover of a certificate issued by the concerned Authority in the concerned State Government. 72 produces before If, the importer, at the time of import - (i) the Assistant Commissioner of Customs a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Space certifying that the said satellites and pay-loads are for launch by Indian launch vehicles from Indian soil into Outer Space in conformity with the gives an undertaking to provisions of the Outer Space Treaty of 1967; and (ii) the effect that the ground equipment imported for testing the satellites or pay-loads shall be re-exported within a period of six months from the date of their importation or such extended period as the Assistant Commissioner of Customs may allow, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 73 If the impoter furnishes an undertaking to the Assistant Commissioner of Customs that the coin blanks shall be used only for the purpose of coining of coins in a Mint of Government of India. 74 the Ministry of the goods are imported by - (i) If, - (a) a person who has been awarded a contract for the Surface Transport, or (ii) construction of roads in India by or on behalf of the Ministry of Surface Transport, by the National Highway Authority of India or by Public Works the importer, at the time of importation, Department of a State Government; (b) furnishes an undertaking to the Assistant Commissioner of Customs to the effect that he shall use the imported goods exclusively for the construction of roads and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation; and in case of goods of serial no. 12 and 13 of List 28, the importer, at the (c) time of importation of such goods, also produces to the Assistant Commissioner of Customs, a certificate from an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Surface Transport (Roads Wing), to the effect that the imported goods are required for construction of roads in India. 75 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing basic telephone service. 76 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing cellular mobile telephone service. 77 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing radio paging service. 78 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing value added services via VSAT system. 79 the goods are imported by an Indian Company or If, - (a) Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the "contractor") or a sub-contractor of such Company or Companies or such consortium and in each case in connection with petroleum operations to be undertaken under a contract signed with the Government of India, on or after the 1st day of April, 1998, under the New Exploration Licensing Policy of the said where the importer is a contractor, he produces to the First Schedule; (b) Assistant Commissioner of Customs, at the time of importation, the following, a certificate from a duly authorised officer of the Directorate namely :- (i) General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for such petroleum operations and have been imported under a contract signed under the a certificate, in the case of a New Exploration Licensing Policy; and (ii) contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by the Foreign where the importer is a sub-contractor, he produces to Company or Companies; (c) the Assistant Commissioner of Customs, at the time of importation, the a certificate from a duly authorised officer of the following, namely :- (i) Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under a contract signed under the New Exploration Licensing Policy and containing the an affidavit to the effect that such name of such sub-contractor, (ii) sub-contractor is a bona fide sub-contractor of a contractor, (iii) an undertaking from such contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by such a sub-contractor or contractor, as the case may be; and (iv) certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies : Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies. LIST 1 (See S. No. 18 of the Table) (1) Amprolium hydrochloride (2) Ascorbyl dipotassium 2 sulphate dihydrate (3) Ascorbyl polyphosphate (4) Avoparcin (5) Bovine albumin fraction (6) Bovine somatotropin (7) Buparvaquone (8) Calf serum/foetal calf serum (9) Dulbecco phosphate buffer saline medium (10) Flavophospholipol (11) Follicular stimulating hormone (FSH) (12) Gonadotropin releasing hormone (GnRH) (13) Halofuginone bromide (14) Human chorionic gonadotropin hormone (HCG) (15) Ivermectin (16) Lasolacid sodium (17) Leutinising hormone (18) Lincomycin powder (19) Lincospectin (bulk drug lincomycin spectinomycin 1 : 2) (20) Maduramicin ammonium/haduramycin ammonium (21) Monensin granulated (coban premix) (22) Ovaprim [gonadotropin releasing hormones] (GnRH) analogue with domperidone (23) Pleuromutilin (24) Pregnant mare serum (PMSG) (25) Prostaglandin F2 alpha (26) Prostagladin (27) Prostaglandins (PgF2 alpha) (28) Robenidin HCL (29) Tiamulin hydrogen fumarate (30) Tiamulin hydrochloride (31) Tylan premix (32) Tylosin tartarate/tylosin phosphate (33) Vaccine for fish (34) Virginiamycin (35) 4-hexyl resorcinol LIST 2 (See S. No. 46 and 260 of the Table) (1) 32 P Sodium Phosphate (2) 5-Fluorocytosin (3) 5-Fluorouracil (5) 6-Isoguanine  (4) (7) Acyclovir (8) Adriamycin (9) Agglutinating (6) Actinomycin D  Aclarubicin   Sera (10) Allopurinol (11) Alpha interferon (NL) (12) Ambinonium Chloride (13) Amikacin Sulphate (14) Amino-glutothemido (15) Amiodarone Hydrochloride (16) Amiphenazole Hydrochloride (17) Amphotericin-B (18) Amrinon (19) Amsacrine (20) Amilobarbitone Sodium (21) Anti-Diphtheria Normal Human Immunoglobulin (22)  Anti-Haeomophilic Factor concentrate (VIII and IX) (23) Anti- Human lymophocyte immunoglobulin IV (24) Anti-human thymocyte immunoglobulin IV (25) Anti-Pertussis Normal Human Immunoglobulin (26) Anti-Plague serum (27) Human Normal   (28) Anti-Rabies Anti-Pseudomonas Normal Human Immunoglobulin besylate (31) Azathioprine (30) Atracurium Immunoglobulin (29) Aprotinin   (32) Baclofen (33) Beclamide (34) Bemergide (35) Bleomycin (36) Blood group sera (37) Burn therapy dressing soaked in protective jel (Water Jel) (38) Bovine Thrombin for in vitro test for diagnosis in Haemorrhagic disorders (39) Bovine Tossylate (42) Busulphan Brethyleum  (41)  Albumin (40) Bromodes - Xyuoidine (43) Calcium Diosodium Edetate (44) Carbidopa with Levodopa (45) Carmustine (BCNU) (46) Cefoperazone Sodium (47) Ceftizoxime Sodium (48) Cesium Tubes (49) Chenodeoxycholic Acid (50) Chlorambucil (51) Chlormerdrin 197 Hg. (52) IX Cholestyramine (53) Christmas Factor Concentrate (Coagulat on factor complex concentrate) (54) Chroionic Gonadotrophin (55) Co-60 (56) prothrombin (59) Clindamycin (57) Colistin Sulphate (58) Colistin Sulphomethate Sodium (62) Colistin Sulphomlethate Sodium (60) Corboquone (61) Corticotrophin (66) Cynamide  (63) Cyclophosphamide (64) Cyclosporine (65)  Cyclocytidine Daunomycin (69) Daunorubicin (70) DDAVP (68)  (67) Dacarbazine  Cytarabine Intranasal spray (71) Desferrioxamine Mesylate (72) Desmopressin/Nasal Spray Diagnostic (74)  Antigen  (73) Diagnostic Agent for Detection of Hepatitis B (76) sera  Antitoxin  Diphtheria  kits for detection of HIV antibodies (75) Diphtheria (79)  Hydrochloride  Dobutamine  Diazoxide (78)  (77)  Dimercaprol     Dispyramide  (81)   Hydrochloride   Doxorubicin   Serum (80)  Antitoxin   Phosphate (82) Edrophonium Chloride (83) Dopamine Hydrochloride (84) Enzyme linked Immunoabsorbent Assay Kits [ELISA KITS] (85) Epirubicin (86) Estramustine Phosphate (87) Etoposide (88) Fibrinogen dried (89) Floxuridine (FUDR) (90) Flucytosin (91) Flutamide (92) Follicle Stimulating Hormone (FSH) (93) Fospestorol Sodium (94) Ftorafur (95) Gallium Citrate (67GA) (96) Gasgangrene Anti-Toxin Serum (97) Glucagon (98) Heptamine (99) Hepatitis B Immunoglobulin (100) Hepatitis B Vaccine (101) Hexamethyl-molamino (102) Histoglobulin (103) Hydrallazine (104) Hydroxyurea (105) Idarubicine Hydrochloride (106) Idoxuridine (107) Ifosfamide (108) Isoprenaline (109) Immunoassay kit for blood Fibrinogen degradation product for direct estimation for diagnostic test in D.I.C. (110) Inactivated rabies vaccine [Human deployed cell] (111) Inactivated rabies vaccine (Verocells) (112) Indium (III) in bleomycin (113) IndiumSterile generator and elution accessories (a) Indium 113 in brain scanning kit (b) Indium 113 in liver scanning kit (114) Interferon alpha - 2b/interferon alpha- 2a/Interferon NL/Interferon alpha NL (LNS) (115) Intravenous amino acids (116) Intravenous Fat Emulsion (117) Iopamidol (118) Iohexol (119) Ketamine Hydrochloride (120) Isoflurane Liquid (121) L-Selelomethionine (75 Se) (122) L-Asparaginase (Colaspase) (123) Leucovorin Calcium (124) Lactulose (125) Levodopa with benserazine (126) Levodopa (L-Dopa) (127) Mannitol Busulphan preparations (128) Lomustine (CCNU) (129) Meningococcoal A+C combined vaccine with diluant solvent (130) Melphalan (131) Mercaptopurine (132) Mesna (133) Methisazone (134) Methicilin Sodium (135) Methoxyiso-butyl Isonitrile (136) Methotrexate (137) Methyl prednisolone (138) Methoxyflarane (139) Metrizamide vials with diluant (140) Metraminol (141) Mithramycin (142) Mimustine Hydrochloride (DC's) (143) Mitotane (144) Mitomycin C (145) MMR (Measles), mumps and rubella) vaccine (146) Mitoxantrone (147) Moxalactum(148) Monocomponent insulins (149) Nalorphine Hydrobromide (150) Mustin Hydrochloride (151) Netilmycin (152) Naloxone (153) Nitroglycerine (154) Nifedipine (155) Normal Human plasma (156) Normal Human immunoglobulin (157) Nuclear magnetic resonance contrast agent (158) Normal Human serum Albumin (159) Penicillamine (160) Pancuronium Bromide (161) Pentamidine Isethionate (162) Penicillinase (163) Phenytoin Sodium (164) Peplomycin (165) Pilocarpine (166) Phosphorus (32P) intralymphatic (167) Podophyllotoxin (168) Pipracillin Sodium (169) Poliomyelitis vaccine (Sabin and Salk) (170) Polidocanol (171) Polymyxin B Sulphate (172) Polyestradiol Phosphate (173) Potassium P-Aminobenzoate (174) Pork Insulin Zinc Suspension (175) Praziquantel (176) Pralidoximes Chloride/Iodide (177) Prednimustine (178) Prazocin (179) Pork Insulin/Bovine insulin (180) Procarbazine Hydrochloride (181) Purified Chick Embryo Cell (PCEC), Rabbies Vaccine (182) Protamine Sulphate (183) Pyridostigmine Bromide (184) Pyridinol Carbamate (185) Radio-immunoassay kit for hormones (T3, T4 TSH Insulin, Glucogen, Growth Hormone Cortizol, L.H. and FSH and Digoxin (186) Quinidine Glucomate (187) Radioisotope TI 201 (188) Racemic Phenylailnine Nitrogen Mustard Hydrochloride (189) Ribavarin (190) Septopal beads and chains (191) Selegeline Hydrochloride (192) Sodium Arsenate 74 As (193) Sodium Cromoglycate spincaps and cartridges (194) Sodium Hyalauronate sterile 1% solution (195) Solution containing Human Follicle Stimulating and Luteinising hormones (196) Solution of Nucleotides and Nucliosides (197) Somatostatin (198) Somatropin (199) Specific Desensitizing Vaccine (200) Sterile Absorbable Haemostat for control of surgical vessel bleeding (201) Streptokinase and Streptodomase preparations (202) Stronitum Chloride (85 Sr.) (203) Strontium SR-89 Chloride (204) Succiny Choline Chloride/Bromide (205) Tamoxifen Citrate (206) Testolactone (207) Technitium-99M (208) Thioguanine (209) Thallium 201 (210) Timolol Maleate (211) Ticarcillin Sodium (212) Tobramycin Sulphate (213) Tissue Plasminoger Activator (214) Tranexamic Acid (215) Tocainide (216) Tri-iodo-thyramine (217) Triethylene Tetramine (218) Triethylene Thiophosphoramide (219) Trofosfamide (220) Tubcurarine (221) Urokinase (222) Ursodeoxcycholic Acid (223) Vancomycin (224) Vasopressin (225) Vecuronium Bromode (226) Vindesin Sulphate (227) X-ray diagnostic agents, the following :- (i) Propylidone (ii) Ethyl iodophenylun decylate (iii) lodipammide methyl glucamine (iv) Lipidoll utra fluid (v) Patent blue (228) Anti D Immuno globulin (229) Aurothiomalate Sodium (230) Botulinum Toxin Type `A' (231) Carboplatin (232) Cefixime (233) Cefuroxime (234) Decapatyl Depot (235) D.K. line 100% purified perflurodicalin liquid (236) Filgrasim/Molgramostim (G-CSF/GM-CSF) (237) Flecainide (238) Fluconazole (239) Foetal Bovine Serum (FBS) (240) Gadolinium DTPA Dimeglumine (241) HTLV - 1 Western Blot Kits (242) Human Tetanus Immunoglobin (243) Immucyst, Iopromide, Iotrolan (244) Legionella Pneumophilis IF kits (245) Muromonab - CD 3 (246) Octreotide (247) Typhoid Vaccines : (i) VI Antigen of Salmonella Typhi (ii) Ty 21a cells and attenuated non-pathogenic strains of S. Typhi (248) Ortho brain thromboplastin (Rabbit brains thromboplastin for PT test) (a) Activated thrombofax (Reagent for PT tests) (b) Fibrindex (Human Thrombin for TT tests) (249) Pneumocystis carinil IF kits (250) Polyestradiol (251) Puenoxytelzamins (252) Rabies immunoglobulin from equine origin (253) Sodium Hyalauronate sterile solution 1.4% (254) Thrombokinase (255) V.M. 26 (256) Viofdarbine (257) Iscador, CLIA diagnostic kits (258) Lamivudine LIST 3(A) (See S. No. 108 of the Table) PARTS, CONSUMABLES AND OTHER ITEMS (1) Leather, plastic, rubber coco board, masonite board or plastic board, heels with or without rubber/PVC top lift (2) Toe caps and counters for leather footwear (3) Insoles or midsoles and sheets therefor (4) Welts made from leather or plastic (5) Shoes eyelets (6) Felt sleeves (7) Heel tips (8) Unit soles with or without heels (9) Stamping wheels (10) Patterns for leather footwear (11) Plastic or nylon tipped hammers (12) Plastic, PVC or nylon lasts with or without steel hinges (13) Clicking boards for leather machinery (14) Harness needles for hand sewing pre-punched cards (15) Pre-punched cards (16) Leather designers kit, namely, designers knife, shoe measuring tape, designers tapes and satra vacuum former (17) Industrial sewing machine needles with leather point (18) Bell skiving knives (19) Band knife for splitting machines (20) Cutting and clicking dies (21) Aluminium shoe forms with or without heating elements (22) Silver marking pencils or pens and refills thereof (23) Polyurethane films and polyurethane foils of thickness 0.3 mm and above but not above 0.7 mm, for finishing leather (24) Non-woven material coated with thermoplastic for the manufacture of toe-counters (25) Cellulose board insole sheets (26) Leather board made from leather scrap for the manufacture of counters and stiffeners (27) Masonite or coco board (28) Sole leather bends (29) Styrene butadiene styrene oilbound copolymer for the manufacture of soles (30) Rubber, resin rubber, EVA or crepe sheets for soles and heels (31) Felt, all types (32) Sulphonated/sulphated/oxidised/chlorinated cod oil or sulphonated/sulphated/ oxidised/chlorinated neats foot oil or sulphonated/oxidised/chlorinated fish oil or mixtures thereof (33) Pigment finishes for leather (34) Aluminium tanning agents, oil tanning agents, zirconium tanning agents, basic chrome sulphate (35) Polishes, creams and similar preparations for footwear or leather (36) Casein, resin and polyurethane binders (37) Slip agents of heading No. 32.08 (38) Lacquer and lacquer emulsion of heading No. 32.08 (39) Preservatives of heading No. 29.42 (40) Synthetic fat liquors (with or without hydrocarbons), non-ionic fat liquors, and mixtures thereof (41) Fatty oil or pull up oil (42) Syntans (43) Solvent soluble dye Mordant Brown of Hue No. 79 (44) Solvent soluble dye Acid Brown of Hue Nos. 76, 97, 98, 126, 127, 144, 160, 161, 162, 165, 188, 194, 196, 237, 265, 270, 282, 290, 298, 303, 310, 321, 322, 355, 358, 360, 362, 373, 387, 396, 402, 422, 425, 432, 433, 434 or 447 (45) Solvent soluble dye Acid Black of Hue Nos. 50, 52, 71, 76, 82, 83, 84, 132, 172, 194, 209, 210, 213 or 221 (46) Solvent soluble dye Acid Blue of Hue Nos. 133, 134, 193, 254, 260, 312 or 349 (47) Solvent soluble dye Direct Blue of Hue No. 59 (48) Solvent soluble dye Acid Red of Hue Nos. 97, 119, 234, 283, 362, 399, 404, 407 or 423 (49) Solvent soluble dye Direct Red of Hue Nos. 111 or 239 (50) Solvent soluble dye Acid Green of Hue Nos. 26, 68 or 111 (51) Solvent soluble dye Acid Orange of Hue Nos. 51, 78, 80, 95, 162, 168 or 170 (52) Solvent soluble dye Acid Violet of Hue Nos. 80 or 90 (53) Solvent soluble dye Acid Yellow of Hue Nos. 96, 194, 204, 220 or 243 LIST 3(B) (See S. No. 108 of the Table) OTHER PARTS, CONSUMABLES AND ITEMS (1) Formulations containing either Thio Cyano Methyl Thio Benzothiazole (TCMTP) or Para Chloro Meta Cresol (PCMC) or both; Self basifying chrome tanning agents (2) Penetrators (3) Stamping foil in strips of width not exceeding 6 inches (4) Eyelets, hooks, rings, all type locks including magnetic locks, push clips, metal handle, key chain holder, corners, puller, fancy caps, clamps, decorative rivets, decorative fittings and logos, handle holders, studs, sockets, hinges, buckels, metal frames, tacks and washers (5) Buttons, press-fasteners and snap-fasteners falling under heading No. 96.06 (6) Magnetic buttons (7) Abrasive sheets falling under heading No. 6805.20 (8) Shanks and welts falling under heading Nos. 73.26 or 64.06 respectively (9) The following chemicals for the manufacture of leather chemicals : (I) Phenol (II) Naphthalene (III) Paraffin wax (IV) Dicarboxylic acid and mixtures thereof (V) Acrylic acid/ Methacrylic acid (VI) Synthetic substitute for Sperm oil (VII) Synthetic substitute for Neats foot oil (VIII) Alcohol mixture of C9, C10, C11 (IX) Thio cyano methyl thio benzothiazole (TCMTB) (X) Para chloro meta cresol (PCMC) (XI) Lactic Casein (XII) Titanium Dioxide (XIII) Iron Oxide (XIV) Cellulose Acetate Butyrate (XV) Methoxydihydropyrane (XVI) Dioxy Diphenyl Sulphone (XVII) Dehydro Thio Paratoludine (XVIII) Nitro Amino Phenol Sulphonic Acid (XIX) Dicyandiamide (XX) Silicone Oil in solvent or water (XXI) Sodium Picramate (XXII) Methyl Pyrozollic Acid (XXIII) Itaconic Acid (XXIV) 1-Methoxy Propenol-2 (XXV) Ethyl Acetate (XXVI) Butyl Acetate (XXVII) 2 Ethyl Hexyl Acetate (XXVIII) Emulsifiers (XXIX) Ethyl Glycol (XXX) Butyl Glycol LIST 4 (See S. No. 131 of the Table) (1) Cold drawn free cutting brass rods of diameter 0.4 mm to 14 mm (2) Leaded brass strips and sheets in coils or flats of thickness upto 4 mm and width upto 40 mm (3) Leaded brass strips in coils or in straight length of thickness 0.01 mm to 0.05 mm and width upto 50 mm (4) Leaded naval brass strips in coils of thickness 0.12 mm to 3 mm and width 8 mm to 30 mm (5) Nickel silver brass strips/flats of thickness 0.10 mm to 1.50 mm and width 6 mm to 55 mm (6) Phosphor bronze strips of thickness 0.02 mm to 0.15 mm and width from 15 mm to 30 mm (7) Phosphor bronze rods of diameter 0.5 mm to 2 mm and length upto 3000 mm (8) Brass pipes of outer diameter 0.45 mm to 1.9 mm (9) German silver rods of diameter 5 mm to 10 mm (10) Horological steel rods (leaded) bright drawn or centreless ground finish in perfectly stgraightened lengths of diameter 0.3 mm to 6 mm and length upto 3 metres (11) Horological steel strips cold rolled with accurate flatness and bright regular edges of thickness 0.01 mm to 1 mm and width 0.2 mm to 30 mm (12) Super alloy strips of thickness upto 0.65 mm and width upto 30 mm (13) Synthetic rubby for watch jewels (14) Spring steel strips type DIN 2075 Kl 2, of thickness 0.01 mm to 0.5 mm and width 0.2 mm to 0.5 mm (15) Stainless steel strips of thickness 0.01 mm to 1.5 mm and width upto 45 mm (16) Stainless steel wire in coils for click spring and setting lever spring of diameter 0.1 mm to 1.5 mm (17) Brass flats of thickness upto 6.5 mm, width upto 50 mm and length upto 2000 mm (18) Brass rods of diameter upto 36.5 mm (19) Nickel silver rods of diameter upto 3 mm and length upto 3000 mm (20) Leaded brass pipes of outer diameter 18 mm to 35 mm, and inner diameter 10 mm to 30 mm (21) Stainless steel flats, cold rolled or hot rolled for manufacture of watch case bezels of thickness 2.5 mm to 10 mm and width upto 55 mm (22) Cold rolled stainless steel strips for the manufacture of watch back covers and bezel rings of thickness 0.4 mm to 3.0 mm for back cover and 1.2 mm to 5.0 mm for bezel rings and width upto 55 mm for both (23) Unleaded brass strips of thickness 0.07 mm to 1.5 mm and width 5 mm to 50 mm (24) Phosphor Bronze strips in coils of thickness 0.125 mm and width 28 mm (25) Lacquers and varnishes (26) Brass circles of thickness 0.4 mm to 0.5 mm and diameter 24 mm to 50 mm (27) Brass for making appliques/indexes/logos/windows with 2 feet, of thickness 0.3 mm to 2 mm and width 1 mm to 4 mm (28) Nickel silver circles of thickness 0.5 mm and below and diameter 24 mm to 50 mm (29) Tritium activated zinc sulphide (30) Luminous compounds for dials (31) Silver solder core wire for dial legs in straight length or in coil of diameter 0.4 mm to 1 mm (32) German silver strips of thickness 0.1 mm to 1 mm and width 5 mm to 10 mm (33) Free cutting quality stainless steel rods of diameter upto 6 mm and length upto 3000 mm (34) Polyamide strips of thickness upto 0.10 mm and width upto 15 mm (35) Copper berillium strips in coils of thickness upto 0.35 mm and width upto 25 mm (36) Polished steel strips in coils of thickness 0.05 mm to 0.5 mm and width upto 15 mm (37) Leaded brass rods of diameter 0.5 mm to 20 mm and length upto 3000 mm (38) Nickel silver strips of thickness upto 0.1 mm and width upto 50 mm (39) Titanium copper strips in coils/cut lengths of thickness 0.18 mm to 0.20 mm and width 15 mm to 20 mm (40) Aluminium alloy strips whether or not in coil of thickness upto 0.55 mm and width upto 35 mm (41) Leaded beryllium copper rods of diameter 0.5 mm to 20 mm and length upto 3000 mm (42) Stainless steel pipes of outer diameter 1.8 mm inner diameter 1.54 mm and length upto 3000 mm (43) Mineral glass sheets (44) Copper wire of diameter 1 mm to 2.5 mm for making logos/indexes/applique, for watch dials (45) Crystal glass chatin (cast glass profiles, edge worked and enamelled with reflecting layer) for watch dials (46) Unleaded brass sheet of thickness 0.10 mm to 1.5 mm, width upto 250 mm and length upto 1250 mm (47) Titanium strips of thickness 0.01 mm to 1.5 mm and width upto 45 mm (48) Titantium flats of thickness upto 7 mm and width upto 55 mm (49) Titantium rods of diameter upto 20 mm and length upto 3000 mm. LIST 5 (See S. No. 132 of the Table) (i) Brick press with accessories like moulds, pallets, stackers, clamping devices or the like for fly ashsandlime brick capacity 3000-5000 bricks/hr. up and down stroke pressure 300-400 kgs./sq.m. (ii) Flyash block making machine capacity 1000 - 2000 block/hr. with vibrators, mixer and accessories like moulds, pallets, stackers, clamping devices or the like (iii) Mixer with bottom valve and outlet pipes for cellular concrete (iv) Moulding equipment, cross cutting plant and longitudinal cutting plant, for cellular concrete (v) Centering bridge for moulds (vi) Moving grate sintering strand for light weight flyash cellular concrete (vii) Purification plant including diaphragm, pump, vacuum filter, gas scrubber, for phosphogypsum (viii) Flash calciner (ix) centrifuge for calcination equipment (x) Partition panel plant (xi) moulds for phosphogypsum (xii) Drier-cum-calciner (xiii) Edge Runner Mill (for crushing and kneading of Clay and Flyash Mixture output 15 to 40 tons per hour depending on the perforation of the grinding plates) (xiv) Pan Mixer (output 25 tons per hour) (xv) Double Shaft Mixer (for mixing of the material consisting of Clay and Flyash) (xvi) Vacuum Worm Press Extrusion machine (capacity of the press up to 36 tons of material per hour) (xvii) Mouth piece (for the above vacuum Worm Press with dimensions corresponding to the required type of Bricks or Blocks which will be produced) (xviii) Automatic Equipment [for cutting and handling of Bricks between the pressing shop and dryers] (xix) Plant Machinery required for making hollow-core roofing/flooring units (xx) Large-size plants for manufacturing of hollow and solid concrete blocks for walling (xxi) Mechanised hydraulically operated Tunnel Form of Wall forms, Slabforms, Columnforms (xxii) Large-size vibrating - beds with integrated curing and wire-tensioning arrangements (xxiii) Vibrating - distributors for speedy production of prefab building parts (xxiv) Hydraulic presses for manufacturing pavement blocks (xxv) Hydraulic heavy duty press for making Hollow Solid Concrete Blocks (xxvi) Foam Generating Equipment, spiral pumps and Foaming compound for light weight cellular concrete (xxvii) Densified wood fibres plates for door shutters LIST 6 (See S. No. 135 of the Table) (1) Air blast dust removing machine (2) All types of staking machines except slocum (slow combing process) (3) Automatic Drying machine (4) Automatic Lacing machine (5) Automatic Leather Perforating and/or Punching machine (6) Automatic Lock-Stitching Cylinder Bed Bartacker (7) Ayutomatic machine to control, to slant and to glue leather straps (8) Automatic Milling machine (9) Automatic Milling-Boring Machine (10) Automatic or semi-automatic hydraulic press (750 tonnes or more) (11) Automatic Padding machine (12) Automatic Spraying machine (13) Automatic Takcs - Reinforce machine (14) Automatic Work Unit for assembling the complete Insole (15) Back Part Moulding machine (16) Band-saw with or without Flier (17) Bandknife Splitting machine (18) Belt Punching and cutting machine (19) Bobbin machine with counter (20) Boot leg ironing machine (21) Bottom Leather Grain Crack Tester (22) Bottom roughing and/or scouring machine (23) Box Stamping machine (24) Buckle Stappling machine (25) Button Hole (Eyelets end) machine (26) Button Sewing machine (27) Button stitch/Sewing machine (28) Cementing machine (29) Cementing machine and cementing gun (30) Chain Slotting machine (31) Channel Closing machine (32) Channelling and Grooving machine (33) Clicking Board levelling machine (34) Clicking machine (35) Clicking Machine Hydraulic (Bottom) (36) Coloriemeter (37) Column Boring machine (38) Computerised Sewing Machine (39) Computerised Skiving machine (40) Conveyor system (41) Counter Cementing Machine (42) Counter Moulding machine (43) Counter Tightening machine (44) Coupling and edge pretrimming machine (45) Crimping machine (46) Crumpling and embossing machine (47) Curtain coating machine (48) Cylinder Bed Sewing machine (49) Die Bending machine (50) Double Band Cleaning machine (51) Dust removing machine-pneumatic/hydraulic (52) Dyeing machine (53) Edge buffing machine (54) Edge Inking machine (55) Edge Pre-Trimming machine (56) Edge Setting machine (57) Edge Trimming machine (58) Elastic inserting machine on variety of garments (59) Electrical machine for cutting and slanting straps (60) Electro pneumatic weaving machine for leather (61) Electronic skin assessor (62) Embosing Plates for Press for leather printing (63) Engraved rollers for Press for leather printing (64) Evening and Roughing machine for Soles and Insolses (65) Fibre Board Flexing machine (66) Fine Turn machines for Lasts (67) Finish Sheet Resistance Tester (68) Finishing Machine for Lasts (69) Fixed Head/Travailing Head Clicking Cutting machine (70) Flat Bed Double Needle Sewing machine (71) Flat Bed Single Needle Industrial sewing machine with or without trimer (72) Folding machine for brief cases and other leather products (73) Folding machine for sides for Brief Case (74) Forepart conditioning machine (75) Frame Fixing/Frame Folding machine (76) Fusing presses (77) Halogen and Adhesive Application machine (78) Hand Operated Press for Inserting Perforation Tubes and Prickers (79) Heat Setting plant (80) Heat transfer press (81) Heel and Sole Brushing machine (82) Heel and Sole Buffing machine (83) Heel Attaching machine (84) Heel Breast Cementing machine (85) Heel breast roughing machine (86) Heel Breasting machine (87) Heel Building machine (88) Heel Covering machine (89) Heel Molder Flanger (90) Heel Nailing machine (91) Heel profiling machine (92) Heel seat and side lasting machine (93) Heel Seat Cement Lasting machine (94) Heel Trimming/pretrimming/Cupping or combined machine (95) High Speed Corner Stitching machine (96) Hole punching machine (97) Hot Melt Applicators (98) Humidifier for Uppers (99) Hydraulic/Pneumatic sammying and/or setting machine (100) Hydraulic automatic plating ironing machine (101) Hydraulic Bending machine (102) Hydraulic Fleshing machine (103) Hydraulic Ironing and Embossing Press (104) Hydraulic Scudding machine (105) Hydraulic Setting machine (106) Hydraulic Shaving machine (107) Hydraulic Shearing machine (108) Hydraulic Splitting machine (109) Hydraulic Sulphide applicator (110) Injection Moulding of PVC/TPR Soles, Inserts and Half Soles (111) Injection Moulding press to produce Plastic shoe Lasts (112) Insole Attaching machine (113) Insole Backpart Stiffener Tester (114) Insole Bevelling machine (115) Insole Covering machine (116) Insole moulding machine (117) Ironing and Conditioning machine (118) Kamborian Lasting machine (119) Knife Grinding machine (120) Knife making equipment for cold steel and forged steel (121) Label stitching machine (122) Last Turning machine (123) Lastometer (124) Leather buffing machine (125) Leather cover Cutting machine for Heels (126) Leather Polishing machine (127) Leather rolling machine (128) Lining roughing machine (129) Lining Trimming machine (130) Loop closing machine (131) Loose/Nailing machine (132) Manual loop cutter (133) Mckay Stitching machine (134) Milling machine for shoe Uppers (135) Moccasin Lining Trimming machine (136) Moccasin Performing machine (137) Motorised hides and skins stamping machine (138) Moulds for rubber sole direct vulcanising press and PVC direct injection soling machine (139) Multiple Row Upper Chain Stitching machine i.e. 3 Rows and above (140) Three Needles for Small Arm Cylinder machine for Multiple Row Stitching (141) Outsole Stitching machine (142) Paste drying unit (143) Pattern binding machine (144) Pattern Corner Cutting and binding machine (145) Pattern grading machine (146) Pattern making machine (147) Pattern Perforator (148) Pattern Plan (149) Pattern scanner (150) Pattern Scanning machine (151) Piping machine for trimming and embelishment fixing machine (152) Plan Computer Controlled Nesting System (153) Pneumatic Broaching machine (154) Pneumatic control moulder machine for buckles (155) Pneumatic fusing machine for ironing fusible interlining (156) Polishing machine (157) Polyshanking machine (158) Polyurethane/PVC/TPR Sole, Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station) (159) Pore part lasting machine (160) Post Bed Double Needle Sewing machine (161) Post Bed Single Needle Sewing machine (162) Post Bed Single Needle under Edge Trimming (163) Pounding or beating or ironing machine or combination of such machines (164) Pre-lasting conditioner (165) Preparing and polishing machine (166) Pulling Over and Cement Lasting machine (167) Pulling Over Machine (168) Punches for model room (169) Punches of all varieties (170) Punching and/or eyeletting machine (171) PVC/PU direct injection soling machine [DIP construction] (172) Quilting machine (173) Raised Cord Sewing machine (174) Reactivating Plant for Shoe and Soles (175) Recessing and Roughing Soles machine (176) Recessing Welt machine (177) Rotary Collection Unit (178) Rotary Pigment Coating machine (179) Rotary Printing machine (180) Rough Turn machine for lasts (181) Roughing machine for Plastic Blocks (182) Roughing machinery for upper or soles or insoles (183) Rubber sole direct vulcanising press [DVP construction] (184) Satra Plan and Knife search (185) Scissors Cutting machine for plate (186) Scouring and Blending machine (187) Screwing machine (188) Seam Ironing machine (189) Sectioning machine (190) Sewing machine Cylinder Bed (191) Sewing Machine for Ruffled Work and Genuine Mocassin (192) Sewing Machine Zig Zag Flat Bed (193) Shank/Sole/Counter reducing machine (194) Shank Rivetting machine (195) Shears for cutting pattern (196) Shears for Iron Bars (197) Side Lasting machine (198) Sidewell Roughing machine (199) Skiving machine (200) Slike Fastener Fatigue Tester (201) Snap fasteners fixing machine with or without dies therefor (202) Sole/Heel/Seat Roughing machine (203) Sole Edge Recessing/Shapping machine (204) Sole Levelling machine (205) Sole Stamping/Embossing machine (206) Soling Material Abrasion machine (207) Spiral Cutting machine/Cutting Press (208) Spray Booths (209) Stamping machine for Upper/Lining/Socks (210) Steam Toe Press (211) Stich Marking machine (212) Strap/Strip Cutting machine (213) Strap Folding machine (214) Stretching and drying machine with or without conveyor and toggles (215) String Lasting machine (216) Strobel type stitching machine (217) Studs Attaching machine (218) Suit Case Stitching machine (219) Tack heel seat lasting machine (220) Tack Lasting machine (221) Tack Side lasting machine (222) Tanning and colouring drums (223) Tapping and seam rubbing machine (224) Testing Equipments, namely :- Flexometer/Upper material flexing machine, Tensometer/Lastometer, Permeometer/Upper leather water proofness tester, Penetrometer/Bottom Leather water penetration machine, Finish rub fastness tester, Upper leather abrasion resistance machine, Dome platicity apparatus, Finish fleat resistance tester, Adhesion of finish tester, Leather shrinkage temperature determination apparatus, Wrinklometer, Bottom Leather grain crack tester, Electronic moisture meter, Dyeing and fumbling machine for laboratory, fibre board flexing machine, State of cure apparatus, Ross Flexing machines, Soling materials abrasion machine, Heel fatigue tester, Heel impact tester, Centilever tensiometer, Viewing box for assessing visible damage, Slide fastener fatigue tester, Insole backparts stiffness tester, shoe flexing machine, Break/pipness scale, Sole Adhesion tester, Safety Footwear impact tester, Rapid tear tester, Needle holding jig, Shoe lace adhesion machine (225) Thermo cementing and folding machine (226) Toe Cap Applicator Thermoplastic (227) Top Lift Slugging machine (228) Transfer Arm (229) Trimming/milling machine with or without polishing device (230) Twin Needle, needle feedlock stitch sewing machine (231) Twin Sole Attaching machine (232) Two Needle Lock Stitching machine (233) Unlasting machine (234) Upper Cementing machine (235) Upper Edge Inking machine (236) Upper Embossing machine (237) Upper Folding machine (238) Upper Forming machine (239) Upper Perforating macine (240) Upper Reinforcing machine (241) Upper Seam Rubbing/Beating machine (242) Vacuum Drying machine (243) Vacuum forming machine for last with vacuum pump (244) Vice for holding pattern (245) Vision Lasting System for Toe Lasting machine (246) Vulcanizing Press (247) Welt (Rand) Attaching machine (248) Aquamix for use in Tanning industry (249) Prodomix for use in Tanning industry (250) Microtan/Computan for use in Tanning industry (251) Pneumatic press for engraving and marking (252) Pneumatic staple gun for stapling insoles, heels and uppers (253) Stapling machine for lows to upper on leather shoes (254) Lighting assessment cabinet (for checking colour under different light conditions) (255) CAD/CAM equipment for shoe designing and pattern engineering including software (256) Bistep cutting machine (257) Spiking machine (258) Airhood with grinder (259) Sock liner press (260) Box folding machine (261) Outsole plates (262) Dust collector systems (263) Shoe box making machine (264) Splitting machine (fitted with electronic and computer devices, etc.) (265) Moulds for leather footwear LIST 7 (See S. No. 145 of the Table) (1) Connecting rod assembly (2) Crank 1, 2 and 3 (3) Piston ring set (4) Coil ignition (5) Ignition coil assembly (6) Pin piston (7) Rod connecting (8) Pin crank (9) Gear adjustment (10) Lever tilt 2 (11) Handle gear shift (12) Carburettor assembly (13) Pinion (14) Shift can assembly (15) Lower casing assembly (16) Propeller assembly (17) Reed valve assembly (18) Crank shaft assembly (19) Fuel pump assembly (20) Cowling bottom LIST 8 (See S. No. 163 of the Table) (1) Heat Exchangers for steam sterilisation of soil in green house (2) Low draught horizontal axial fans with energy efficient motors (3) Fogging machines (4) Automatic shading system (5) Drip Irrigation system for green house (6) Humidifiers (7) Kool-cel pad system for cooling (8) Ultra violet retardant fibre glass/plastic sheets (9) Flower grading machine LIST 9 (See S.No.168 of the Table) Kitchen Equipment: I. (1) Dough Kneading Machine (2) Dough Dividing Machine (3) Electric Egg Boiler (4) Band Saw Machine for cutting Meat - Fish Bones etc. (5) Meat cutting slicing Machine/mincing and grinding machines (capacity 300 kg per hour) (6) Meat tenderising machine (7) Silver burnishing and polishing machine - small and large table ware (8) Commercial heavy duty can opener (motorised) (9) Smoker (10) Salad dryer (11) Vertical chopper (12) Ice flakers (13) Waffle Irons (14) Bread buttering machine (15) Vertical cutter and mixer (16) Cold beverage dispenser as manufactured by jet spray (17) Planetary mixer - heavy duty (18) Dough sheeter and cutter (19) Sandwich unit (20) Butter portioning machine (21) Automatic glass washing machine (22) Chinese range with steamers (23) Vacuum packing machine (24) Glass dispenser (25) Vegetable preparation and washing machine (26) Conveyor table (27) Bread - Slicing Machine (28) Roll - in - Refrigeration (Absorption type) or Mini Bars (29) Baking ovens - gas fired (30) Ice cubes machines over 1000 lbs. capacity (31) Potato peelers (32) Potato chipper (33) Coffee machine (34) Dish washing machine (35) Glass washing machine (36) Luckon hot plate (37) Plate dispenser (38) Toaster - Conveyor type (39) Tilting frying table/pans (40) Tilting boiling pan (41) Croissant machine (42) Deck oven, Pizza oven, Convection oven and Rotating ovens, for baking (43) Microwave ovens (44) Banquet Trolleys (Refrigerated) (45) Cocktail mixer/beverage mixer (46) Juice dispenser (47) Walk-in Coolers and Freezers (48) Gas Ranges with ovens/flame failure device (49) High pressure hot water cleaning jets (50) Puree machines (51) Deep fat frier with thermostatic control (gas operated) (52) Deep fat frier with thermostatic control (electrically operated) (53) Vegetable cutting/dicing machine (54) Energy saving steam cooker (double/quadruple type) (55) Hamburger machine, pastry rollers and noodle makers (56) Chocolate coating units (57) Pastamatic machines (58) Cold cut Slicer (59) Sausage making machine (60) Waste food disposal machine (61) Flambe trolley (62) Vegetable steam cooker (63) Draught beer dispensing unit (64) Chinese Banquet Silverware (65) Infra Grill (66) Heavy duty salamander (Gas/Electrical) (67) Blast Freezer, II. Health Club Equipment: (68) Rowing machine (69) Orbital massagers (70) Abdominal board (71) Steam bath (72) Jogomatic motorised treadmill (73) Butter-fly machine (74) Slendertone shinning equipment (75) MSA Oxygen administrator complete with cylinder/face mask (76) Power Jog machine, III. Laundry Equipment: (77) Dry cleaning presses (78) Extractors - 65 lbs. (79) Washer extractors (more than 100 lbs.) (80) Multi-purpose presses and utility presses (81) Garment finisher (82) Steam finishing boards (83) Marking machines (84) Water-spray gun and air vacuum system (85) Vacuum unit (86) Spotting Board (87) Tumblers (Hot oil operated/Steam heated) Dryer (Programmable) (88) Flat work iron (Hot oil operated/Steam heated) (89) Steam Cabinet unit (90) Shirt Unit (i.e. Sleeves, Body and Bossom Collar and Cut Press, etc.) (91) Upholstry processing machines viz., perfect pleet machine and curtain stretcher. (92) Puff iron (93) Lint Separator. IV. House Keeping Equipment :  (94) Industrial type vacuum cleaner (95) Carpet shampooing machine (96) Drying machine (for carpets) (97) Breathing apparatus for fire fighting (98) Smoke/fire detectors sprinkler systems (99) Portable motorised deodoriser m/c. (100) Fogging machine for fire fighting (101) Papoosing machine (102) Pile lifter (103) Floor Polishing Machine, Floor Scrubbing Machines (104) Insect and Pest Killers V. Energy Saving Devices :  (105) Tinted glass (106) Centrifugal Heat Reclaim Machine (107) Double Effect Absorption Machine for Air-conditioning VI. Miscellaneous Equipment :  (108) Locks and keys with emergency/construction keys and emergency Escape door (109) Gas Leak detector (110) Digital temperature gauge (111) 6600 Vol. 1100 volts high tension magger insulation testing kit. (112) Magnetic locking devices sliding folding partition (113) Ultra high pressure washer with accessories for coil cleaning drain cleaning (114) Garbage incinerator with heat recovery unit (steam hot water) boiler with accessories (115) Sterasyl water filter for drinking water - or equipment using silver ioddle (116) Submerged swimming pool cleaner (with motor of extra low voltage 40 volts) unit with accessories - complete set (117) Fireman suit (118) Electronic liquid level indicator (119) Hand Driers (120) Garbate compactizer (121) Bottle Crusher (122) Sauna Heaters and Saunas VII. Front Office Equipment :  (123) Electric locking system (124) Key cutting machine (125) Computerised electronic vaults, LIST 10 (See S. No. 177 and 178 of the Table) (1) Singeing machine (2) Yarn/Fabric mercerising machine (3) Continuous bleaching plant (4) Fabric reversing machine (5) Fabric dyeing machine complete with dye kitchen accessories (6) Wet fabric spreading and squeezing machine (7) Relax drum/conveyer drying machine (i) Drying range (ii) Float dryers (iii) Loop dryers (iv) Drum dryers (v) Jet dryers (vi) Rapid dryers (8) Compacting Machine (9) HTHP Hosiery yarn dyeing machine complete with dye kitchen and accessories (10) Soft package winders (dye package winders) (11) Yarn drying machine (12) Automatic dye weighing and dispensing machine (13) Volumetric/Gravimetric measurement liquid chemical station (14) Open width Tubular inspection machine (15) Lab dye preparation machine (16) Fastness testing equipment (17) Shrinkage testing equipment (18) Lab infra Red Drying Machine (19) Indigo dyeing range with/without sizing plant. (20) Continuous weight reduction machinery through microwave technique. (21) Computer colour matching equipment. (22) High speed computer control padding mangle. (23) Effluent treatment unit with biopaq reactor, activated sludge process, activated carbon, ultrafiltrations ozonisation facilities. (24) Powder dot coating machine. (25) Laser engraver. (26) Kier decatising/continuous decatising machine. (27) Combined contipress/ decatising machine. (28) Effluent treatment unit with automatic sensing devices, automatic controlled chemical dozing dissolved air floatation (DAF), reverse osmosis, sludge dewatering, decanters, ultrafilters, vacuum filters to deliver water for reuse. (29) Pre-shrinking range for flat and Knitted goods (30) Knit-tubular mercerising or bleaching-cum-mercerising machine. (31) Auto flame controlled, width controlled singeing machine for flat and Knitted fabrics. (32) Solvent scouring machine. (33) Milling and scouring Machine (34) Shearing and Polishing Machine. (35) Kier Decatising/Decatising Machine. (36) Combined Contripress/Decatising machine. (37) Blanket Fringing Machine. (38) Raising/Brushing Machine (39) Hydraulic Flat Paper Press/Continuous Hydraulic Flat Paper Press/Rotary Press. (40) Circular Knitting Machine (41) Industrial Sewing machine (42) Single needle bed drop feed lockstitch machine (43) Single needle lockstitch flat bed machine. (44) Single needle flat bed drop feed lockstich machine with speed more than 3500 stiches per minute. (45) High speed twin needle feed lockstitch machine (46) High speed two needle lockstitch machine (47) Computerised multineedle lockstitch/chainstich machine (48) Single needle lockstitch machine with built in trimmer (49) Blind stitch machine of various models (50) Single needle drop feed chainstitch machine. (51) Two needle chainstitch or lockstitch mahine (52) Chainstitch overedging machine (53) Two or three needle chainstitch machine (54) Two thread chainstitch for high speed seaming and banding operation with gear driven pulled feed/compount feed of speed 3500 stitches per minute and above. (55) Safety stitch machine. (56) Fully fashioned high speed knitting machine. (57) Power driven flat bed knitting machine (58) Computerised flat bed knitting machine (59) Power operated flat lock/overlock machine (60) Linking machine (61) Loop making machine (62) Power driven socks knitting/gloves knitting machine. (63) Whole garment making machine (knitted) (64) Plain stitching machine with more than 3500 stitches per minute (65) Computerised plain stitching machine with more than 3500 stiches per minute (66) High speed needle feed two needle flat bed industrial sewing machine. (67) Sewing machine zig-zag flat bed (68) High speed multiple needle sewing machine (69) Class feed of the arm industrial sewing machine. (70) Button hole sewing machine (71) Button stitch sewing machine. (72) Elastic inserting machine (on a variety of garments) (73) Belt attaching machine (74) Zip attaching machine (75) Bar tacking machine (76) Hemstitch machine (77) Smoking machine (78) Computerised pattern maker/pattern grading/marker machine. (79) Power driven cloth cutting machine. (80) Band knife cutting machine (81) Collar turning and blocking machine and cuff turning and blocking machine. (82) Cuff press (83) New automatic collar turning machine (84) Automatic pocket weld sewing machine (85) Pocket creasing machine (86) Embroidery machine with 10 heads and aove (87) Computerised embroidery machine (88) Computerised embroidery pattern making machine with plotter (89) Printing and curing machine (90) Quilting machine (91) Snap fasterns fixing machine and/or siwa thereof (92) Thread cleaning machine (93) Steam Press (94) Portable boiler for steam press (95) Steam Cabinet (96) Vacuum table (97) Fusing press (98) Dry to Dry cleaning machine (99) Stain/spot removing machine/gun (100) Automatic 25-needle shirring/smoking machine (101) Shirt folding machine (102) Form finisher (103) Collar contour trimmer (104) Spreading machine (105) Shoulder pad attaching machine. (106) Shrinkage controlling machines for knitting fabrics (107) Loopdrivers for tubular knitted fabrics (108) Mercerising machines for tubular knitted fabrics (109) Singeing machines for tubular fabrics. (110) Pile cutting machines for knitted fabrics (111) Rotating edging machine for fabric rolls (112) Conveyors for garments (113) Garment Calendering machine (114) Tie making machines (115) Labelling machines (116) Laying and cutting machines (117) Button and Rivet fixing machine and/or dies thereof (118) Auto fabric detwister (119) Weft straightening and calendering machine (120) Slit Opening Machine (121) Rotary/Flat bed screen printing machine (122) Curing/Polymerising machine (123) Continuous rope/open width washing machine (124) Lab Yarn dyeing machine (125) Lab dyeing machine (126) Lab pressing machine (127) Automatic cone winding machine with yarn splicer and auto doffing system (128) High speed warping machine with yarn tensioning, pneumatic suction devices and accessories (129) Shuttleless looms (air jet, water jet, rapier and projectile) (130) Drawing in machine (131) Beam knotting machines (132) Computer aided design system (133) Fully automatic grey fabric inspection machines with roll to roll winding having microprocessor recorder (134) Auto control type humidification plant (135) Colour matching computer (136) Carding Sets (137) High speed Intersecting Rotary/Chain/Pin Drawing Sets/Gill Boxes (138) Rectilinear Combs (139) Draw Frame/Roving Frame/Automatic Rubbing Frame/Bobbiners/Finishers (140) Ring frames from 60MM Ring Dia and above (141) Ring Frames with Siro Spinning attchment/or Auto Doffers having maximum 75 MM Ringh Dia (142) Shearing, polishing and cropping machines (143) Step cleaner (144) Flax hackling machine (145) Drawing machine for Flax (146) Roving machine for Flax (147) Wet ring frame for Flax (148) Auto winding machine for Flax (149) Continuous spinning machines for Viscose Filament Yarn (150) Digital electronic frequency inverters for spinning machines including control boards (151) Finishing oil metering pumps with relevant feed system (152) Metering gear pumps for Viscose (153) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel (154) Precious metal spinnerettes including distribution plates (pre-spinnerette) (155) Spin bath degassing plant by flash evaporation (156) Spin bath backwash filtration system with candle fiiters (157) Continuous dissolving and homogenising system for viscose preparation (158) Contidisk filters for viscose (159) Spinbath heat exchanger in graphite LIST 11(A) (See S. No. 178 of the Table) Goods for non-shore or off-shore oil exploration/exploitation (1) Drilling Bits and Coring Bits including Nozzles (2) All types of Tubulas used for drilling, production and transportation of Oil and Gas including Casing Pipes, Drill Pipes, Line Pipes, Production Tubings and Kellys (3) Drilling Equipment (4) Draw Works, Crown Block, Prime Movers for Drilling Equipment, Motors and Alternators for drilling equipment, Mud Pumps, Gear Boxes and Transmissions for drilling equipment, Torque Convertor and Clutches for drilling equipment (5) Down Hole Tools, including Reamers, Stablizers, Hole Openers and Under Reamers (6) Miscellaneous drilling equipment (7) Core Barrels, Drill Collars, safety Tools, Well Heads, X-mas Trees, Casing Scrappers, Liner Hangers, Casing Hangers, Mud Line Suspension System, BOP Accumulator Units, Choke and Kill Manifolds, Directional and Horizontal Drilling Tools, Pup Joints, Floating Equipment, Cement Retainer, Bridge Plug, Setting Tools, Gasoline and Swabbing Equipment (8) Mud Conditioning Equipment, including Shale Shakers, Mud Agitators, Desander, Desilter, Degasser (9) Stationary or Skid mounted and Mobile Cementing Units including Cementing Bunkers (10) Handling Tools including Elevators, Casing Tongs, Tubing Tongs, Manual and Hydraulic Tongs, Drill Pipe Spinner, Slips, Fishing Tools, Jund Baskets, Fishing Magnets, Junk Subs, Fising Jar and Drilling Jar (11) High Pressure Hoses, Rotary and Vibrator Hoses, Cementing and Circulating Hoses including Rubberised Parts, Casing Thread Protectors, Drill Pipe Thread Protectors and Drill Pipe Wipers (12) Oilfield Chemicals, Mud Chemicals, Well Stimulation Chemicals, Water Injection Chemicals, Oil Flow Improvers including Tri Ethyl Glycol, Pour Point Depressant, Corrosion Inhibitors, Methyl Diethanol Amine (MDEA), Ethyl Mercaptaine, Antifoam, Ferrochrome, Lingnosulphonate, Sulphonated Asphalt, Chrome Lignite, Sintered Bauxite, Polyanionic Cellulose (13) Oil well Class `G' Cement and Cement Additives (14) Production Equipment including Gas Lift Equipment Stimulation Equipment, Production Testing Equipment, Single and Dual Completion Equipment, Down-Hole Testing Equipment, Well Completion Equipment including Expansion Joints Mandrels, Tubing Hangers, Sliding Sleeves, Landing Nipples (15) Pressure Control Equipment, Production Packers, Gravel Pack Equipment, Chicksons, Pup Joints, Wire Rope Lubricating System, Plunger Lift (16) Oil and Gas Separators, Heater Treater, Oil and Gas Burner, Surge Gas Blowers, Exhaust Gas Turbocharger (17) Various types of Oil Pumping Sets, Air and Gas Compressor Unit, Transformers, Gas and Diesel Engines for Pumping Sets/compresors, Down-Hole Motors, Chemical Injection Pump, Equipment for Transportation of Crude Oil and Gas Through Pipe Lines (18) Diving Syste (19) Various types of High Pressure Valves (20) Sub-Surface Equipments, including Sucker Rod Pumps, Sucker Rods Adapter Flanges and Spools (21) Well completion and Wireline Equipment, Wireline Winches, Wireline Tools (22) Mobile and Stationery Cranes (23) Explosives and Fire Fighting Equipment, Fire and Gas Detection Equipment including H 2S Monitor and Fire Fighting materials (24) Common Depth Point (CDP) Cables, Logging Cables, Connectors, Geo-phone Strings, Perforation Equipment including explosives and materials (25) Geophysical Data Acquisition Survey and Processing Equipment including DFS-V with Tape Transport, Air Gun, Streamer, Streamer Oil, Gyro Processing System, Bottom Hole Equipment and Samplers (26) Geological Equipment, Instruments and Control Devices, Chlorinators, Geo-Scientific Laboratory Equipment Process and Control Equipment, Interface Level Detector, Plotter (27) Reservoir Engineering Equipment (28) Oilfield and Laboratory Chemistry Equipment and Instruments including Fann V.G. Meter, Moisture Meter, Spectrometer, TOC Analyser, Flourescence Meter, Gas Chromatograph (29) Non-Sparkling Tools, Neutron Gamma Ray Tools and Equipment (30) Drill Stem Testing (DST) Equipment (31) Safety and Pollution Control Equipment (32) Seismic Units, Vibrosis Units, Open Hole Logging Units, Production Logging Units, Mud Logging Units and Ni-CD Batteries (33) Coating and Wrapping material for flow lines and Trunk Pipelines (34) Mud Engineering, Logging and Cementing Equipment (35) Telecommunication and Telemetry Equipment (36) Anodes for Cathodic Protection Systems (37) Equipment for Oil Terminals for locating faults in buried pipes and cables (38) Non-Directional Radio Beacons, Intrinsically Safe Walkie-Talkie, Directional Finders, EPIRB, Electronic Industrial Security Devices including Electronic Access Control System (39) Specialised Antenna Systems, Simplex Telex Over Radio Terminals, Multichannel/Microwave, Systemx, Test and Measurement Equipment (40) X-Band Radar Transponders, Area Surveillance Systems (41) Sub-Assemblies, Tools, Accessories and Spares (including warranty replacements) for the goods specified in this List. (42) Consumables for running, repairs and maintenance of goods specified in this List. LIST 11(B) (See S. No. 178 of the Table) Goods for on-shore oil exploration/exploitation (1) Drilling Rigs including Rigs for Deep Drilling, Work Over Rigs, Short-Hole Drilling Rigs, Mobile Rigs consisting of various equipment (2) Travelling Block, Hook, Swivel, Rotary Tables, Derrick, Oil/Gas Engines for Drilling Equipment. (3) Oil country machine tools including Pipe Lathes (4) Various types of Testing Equipment including Tester, Indicators, Measuring Meters and Gauges (5) Mobile and Skid Mounted Pipe Laying and Pipe Testing Equipment (6) Synthesised VHF Multi-Channel sets (7) Sub-Assemblies, Tools, Accessories and Spares (including warranty replacements) for the goods specified in this List (8) Consumables for running, repairs and maintenance of goods specified in this List. LIST 11(C) (See S. No. 178 of the Table) Goods for off-shore oil exploration/exploitation (1) Off-shore Drilling Rigs including Jack/Up drilling, Drilling Rigs, Drill Ships, Semi Submersible Rigs (2) Photographic Paper (3) Life Raft (4) Process Platforms, Well Platforms, Production Platforms, Water Injection Platforms, Top Deck Equipment and equipment required on these platforms including process equipment, gas and power Turbines, Pumps, Generators, Prime Movers, Compressors, Electric Motors and Early Production Floating System (5) Cranes, Trenchers, Equipment needed for installation of platforms and laying of pipelines (6) Single Buoy Mooring including Hoses and Ropes, Power Management System, Bow Thruster, Azimuth Thruster, Controllable Pitch Transverse Propeller (7) Sub-Sea Pipeline and equipment (8) Sub-Surface Valves and Equipment (9) Marine Ship Equipment including Water Marker, D.P. System (10) Control Panels including TG, MOL, Central, Local Control Panels, Shut-Down Panels, Airconditioning and Ventilation D/GSW Cooling Pump (11) Synthesised VHF (Aero) and VHF (Marine) Multi-Channel Sets (12) SITOR Terminals, Independent Side Band Radio, Rhota Control Transponders, Digital Microwave Radio (13) Sub-Assemblies, Tools, Accessories and Spares (including warranty replacements) for the goods specified in this List (14) Consumables for running, repairs and maintenance of goods specified in this List. LIST 12 (See S. Nos. 180 and 181 of the Table) (1) Land Seismic Survey Equipment and accessories, requisite vehicles including those for carrying the equipment, seismic survey vessels, global positioning system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemcial surveys for onshore and offshore activities (2) All types of Drilling rigs, jackup rigs, submersible rigs, semi-submersible rigs, drill ships, drilling barges, shot-hole drilling rigs, mobile rigs, workover rigs consisting of various equipment and other drilling equipment required for drilling operations, snubbing units, hydraulic workover units, self elevating workover platforms, Remote Operated Vessel (ROV) (3) Helicopters including assemblies/parts (4) All types of Marine vessels to support petroleum operations including work boats, barges, crew boats, tugs, anchor handling vessels, lay barges and supply boats; Marine ship equipment including water Maker, DP system and Diving system (5) All types of Equipment/units for specialised services like diving, cementing, logging, casing repair, production testing, simulation and mud services, oil field related lab equipment, reservoir engineering, geological equipment, directional drilling, Stimulation, Coil Tubing units, drill stem testing (DST), data acquisition and processing, solids control, fishing (as related to downhole retrieval in oil field operations), well control, blowout prevention (BOP), pipe inspection including Non Destructive Testing, coring, gravel pack, well completion and workover for oil/gas wells including wireline and downhole equipment. (6) All types of casing pipes, drill pipes, production tubing, pup joints, connections, coupling, kelly, cross overs and swages, Drive Pipes (7) All types of drilling bits, including nozzles, breakers and related tools (8) All types of oil field chemicals including synthetic products used in petroleum operations, oil well cement and cement additives, required for drilling, production and transportation of oil or gas (9) Process, production and well platforms for oil, gas and water injection including items forming part of the platforms and equipment required like process equipment, turbines, pumps, generators, compressors, primemovers, water makers, filters and filtering equipment, Telemetery, Telecommunication, Tele-Control and other material required for platforms (10) Line pipes for flow lines and trunk pipelines including weight-coating and wrapping (11) Derrick barges, Mobile and stationary cranes, trenchers, pipelay barges, cargo barges and the like required in the construction/installation of platforms and laying of pipelines (12) Single buoy mooring systems, mooring ropes, fittings like chains, shackles, couplings marine hoses and oil tankers to be used for oil storage and connected equipment; Tanks used for storage of oil, condensate, water, mud, chemicals and related materials (13) All types of fully equipped vessels and other units/equipment required for pollution control, fire prevention, fire fighting, safety items like Survival Craft, Like Raft, fire and gas detection equipment, including H 2S monitoring equipment (14) Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment (15) All types of valves including high pressure valves (16) Communicaton equipment required for Petroleum operations including synthesized VHF Aero and VHF Marine multi channel sets (17) Non directinal radio beacons, intrinsically safe walkie-talkies, directional finders, EPIRV, electronic individual security devices including electronic access control system (18) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment (19) X-band radar transponders, area surveillance system (20) Common depth point (CDP) cable, logging cable, connectors, geo-phone strings, perforation equipment and explosives (21) Wellhead and christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections like chicksons and high pressure hoses, shut down panels (22) Cathodic Protection Systems including anodes (23) Technical drawings, maps, literature, Data tapes, Operational and Maintenance Manuals required for petroleum operations (24) Sub-assemblies, tools, accesories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List. LIST 13 (See S. No. 184 of the Table) (1) LSI/VLSI tester (2) Micromanipulators (3) Molecular beam expitaxy system (MBE system) (4) Expitaxial reactors (5) Chemical vapour deposition (CVD) system - Low pressure CVD (LP CVD) - Metal organic CVD (MO CVD) (6) High pressure oxidation systems (7) Chemical etching systems (8) Plasma etchers (9) Reactive ion beam etchers (RIBE) (10) Reactive ion etchers (11) RF sputtering systems (12) Direct digital control furnaces (13) Ion-implanters (low/medium/high current) (14) Lithography systems (15) Direct step on wafers/steppers (16) X-ray lithography systems (17) E-Beam mask making system (18) E-Beam direct write system (19) Mask aligners (20) Mask inspection systems (comparators) (21) Tape automated bounders (22) Laser Zappers (23) Wafer recognition wire bonders (24) Wafer scriber or Wafer slicer or Wafer sawing machine or Wafer fractures or any combination thereof (25) Die bonders or wire bonders or combination thereof (26) Water sawing machine; Water prober (27) Leak detection system (28) Clean room air showers (29) Particle Monitor/counter both air and liquid borne (30) Automatic encapsulation system; Automatic marking/branding machine (31) Clean room laminar flow air handling system (32) Ultra clean room equipment (33) Ultra high purity demineralised water treatment plant (34) PVDF welding and orbital welding machines (35) Ultra high pure (UHP) gas distribution system (36) Toxic gas distribution/monitoring system. LIST 14 (See S. No. 185 of the Table) (A) Dental equipment, namely, - (1) Air motor/turbine hand piece and control box with foot control (2) Air rotor/turbine complete with or without air compressor (3) Dental engines, for laboratory work or for chair side clinical work on patients (4) Dental operating lights and fibre optic lights (5) Ultrasonic dental cleaning system (6) Ultrasonic scalers of all types (7) Spot welders for dental use with auxiliary functions, outlet : - annealing jack, heat-treat tables, auxiliary cables or plug-in vise (8) Air turbine head/cartridges :- borden turbines - regular cartridge, borden turbines - silencer cartridge and quiet air turbines - compact miniature standard (9) Dental burs of all varieties of various shapes and sizes - carbide, diamond or steel (10) Dental hand pieces, for - air motor, air turbine or drilling engines (clinical and laboratory) for filling, packing and condensation purposes and micromotors (11) Endodontic instruments (root canal instruments), brosches, reamers and files, fillers/wideners and pluggers (12) Anaesthetic cartridges for dental use (13) Body contoured self-adjusting electrically operated dental chair (14) Equipment for chrome cobalt work (15) Fibre optic light equipment with attachments for dental work (16) Porcelain furnace (17) Sand blasting equipment for dental use (18) Vaccum investing equipment for dental castings (19) Developing tarks for dental X-ray (automatic and ordinary) (B) Ophthalmic equipment, namely, - (1) Projection magnifier for contact lens inspection and verificiation (2) Radiuscope base curve (for measurement of contact lenses) (3) Contact lens thickness measuring gauge (4) Sterozoom microscope for inspection of contact lenses (5) Softometer for measurement of the base curve of soft contact lenses (6) Contact lens lathes (7) Contact lens polishing machines (8) Ophthalmic operating lights and fibre optic lights (9) Exophthalmometer (10) Ophthalmo dynamometer (11) Corneal anesthesiometer (12) Dark adaptometer (13) Glare testing equipment (14) Pantoscope (15) Cryo-lathe (16) Ophthalmic cryo equipment (17) CAM stimulator (18) Roper hall foreign body locator (C) Other medical equipment, namely, - (1) High powered X-ray unit more than 50 KW with special attachments for paediatric patients, image intensifiers, TV system and cut film camera (2) Automatic electronic blood cell counter (3) Multi-channel recorder for cardiac electrophysiology with computerised analysis system including facilities for memory (4) Equipment for computerised intra-operative mapping system (5) Operating table-electro hydraulic type (6) Operating lamps-shadowless (7) Immuno-flourescence microscope with or without attached photo- micrography set (8) Cryostat (9) Thermodyne (10) Ultramicrotome (11) Cardio-tachograph (12) Intensive care servo-controlled incubator (13) Open infant care system with servo control (14) Oxygen analyser (15) Apnea monitor (16) Non-invasive continuous BP monitor (17) Transcutaneous oxygen monitor (18) `Filter cartridge' of `filter self rescuer' (19) Fibre optic endoscopes and accessories (20) Portable intermittent traction machines (21) Burn therapy dressing soaked in protective gel (22) Cystoscope and colposcope (23) Urological X-ray examination table (24) Bipolar angiography equipment (25) Electron microscope (26) Rotary microtome (27) Billirubinmeter (28) Fluorescent microscope (29) Phase contrast microscope (30) Inverted microscope (31) Caogulometer (32) Daree gromel illuminator microscope (33) Densitometer (34) Tissue processor (35) Paediatric/neonatal laryngoscope (36) Resuscitator other than compressed air breathing type (37) O 2 blenders (38) Reinforced corrugated tubing (39) Automatic plasmapheresis equipment (blood cell separation) (40) Gas failure alarms (41) Ultrasonic nebulisers (42) Heat nebulisers (43) Local analgesic spray (44) Non-rebreathing valves (45) Ethylene sterilisers (gas) (46) High pressure, pulsing, electronic controlled autoclaves (47) Anaesthesia apparatus (48) Hypothermia machine (49) Respirometer (50) Pulmonary function test machines (51) Capnograph-CO2 meter blood gas - CO2 meter gas to gas (52) Oxygen blending mask (53) Paediatric anaesthesia set (54) Cautery proof cardioscopes with memory (55) Dosemeter (56) Polystyrene phantoms (57) Water phantom (58) Mould room equipment (including styrofoam gatter) (59) Radiation field analyser (60) Survey equipment (including neutron monitor (61) Densitometer for film densitometry (62) TLD (for internal dosimetry) (63) Isotope calibrator (64) Whole body human phantom (65) Angioscope for coronary angiography (66) Doppler equipment (67) Xeroradiographic equipment (68) Urological X-ray examination unit (69) Pressure injector with rapid serial changing unit (70) Computerised tread mill (71) Vector cardiograph (72) Polygraph (73) Phonocardiograph and systolic time interval equipment (74) Tonometer (75) Photo-coagulator (76) Lithotome (77) Paediatric resectoscope/audit resectoscope (78) Peritoneoscopes and accessories thereof (79) Extracorporal lithotriper (80) Calibrated thermo compensated/thermostabilised anaesthetic vapouriser (81) Foetal monitor (82) Bipolar coagulator and forceps (83) Electro-encephalography equipment (84) Doppler carotid scanner (85) Electromyography equipment and accessories thereof (86) Cryosurgery equipment (87) Trans-cutaneous nerve stimulator (88) Filters for extra corporal circulation (89) PET scanner (90) Operating microscope for microsurgery (91) Operating instruments for microsurgery (92) Cardio-vascular catheterisation lab equipment (93) Automatic/laser multi image and multi format cameras (94) Bedside arrythmia analyser/monitor (95) High pressure contrast medium injector (96) Thermal printers, black/white for medical use (97) Thermal printers, colour for medical use (98) Optical disc recorders for medical image storage (99) Multichannel patient monitoring system upto three channels provided - (a) system has plug-in module option for any three para- meters out of ECG, respiration, BP, pulse and temperature or (b) system has monitoring options for any three parameters out of ECG, respiration, BP, pulse, temperature as well as one or more out of arrythmia, cardiac output, oxygen and carbondioxide saturation levels (100) Brain mapping system (101) Evoked potential system (102) Holter monitor system (103) X-ray tubes and tube inserts for X-ray equipment, CT and Cardiac more than 20/40 KW (104) Micro processor controlled high frequency X-ray generator more than 50 KW (105) Contrast medium injector with or without ECG trigger (106) Catheterisation cine film analyser (107) Radiation protection equipment (108) Catherterisation table light (dentalite) (109) Air/power driven drills, saws and reamers (110) Arthoscope (111) Automatic percutaneous lumbar disectomy, console and kits (112) Urodynamic study (113) Gamma counter (114) Cell counter (115) DC catheter, Defibrelator for external use (116) Suction catheter, Epidural and its knife  skin grafting  Manual  (117)  catheter  thermodilution   knife) grafting  dermatome (skin  Electric  (118)  blades  disposable   knife disposable  its  powered) and  battery  (mains  operated  electrically   Air driven dermatome (skin grafting knives) operated on (119)  blades   dermatome for compressed air and its disposable knife blades (120) Mesh graft grafts, disposable mesh graft carriers for the above (121) The expanding skin of categories  other  and  following items required by spinal patients   physically handicapped people : (a) chairs - folding wheel chairs with detachable arms and footrests, special light wheel chairs for easy handling, motorised wheel chairs, special purpose chairs for stairs climbing for tetraplegics and paraplegic workers (b) aids for disabled, namely, folding walking frames (c) aids to extend reach to pick up small items (with small magnet pick up) (d) Specialised fixtures for orthopaedic and spastic, tetraplegics for manoeuvring and providing dexterity to fingers and wrist (e) turning beds for prevention of pressure sores (f) emulsion cushions for tetraplegics and working paraplegics to avoid pressure sores (122) Multichannel (more than 3 channels) cardiac monitoring system with/without central monitoring unit (123) Hyperthermia machine (124) Polypropylene mesh for hernia repair (125) Dental X-ray machine (126) Digital imaging system for face X-rays (127) Orthopantom ram (O.P.G.) X-rays for jaws (128) Jaw surgery equipment - (a) Stryker saws (b) special titanium and tungsten carbide drill bits (c) jaw surgery instruments including special retractors, bone holders (129) ECG transtelephonic recorder/transmitter/recorder-cum-transmitter (130) Linear accelarator (131) Precision delivery device used for administration of insulin with penfil cartridges such as Novopen. (D) Other goods, namely, - (1) Dental implant (2) Dental cements (3) Impression materials of all types/alginate/rubber base/silicon base (4) Dental fillings and non precious metal for crown/bridge/and cast partial denture - (a) chrome cobalt/nickel chrome/porcelain bond metal/low fusing technique alloy (b) dental crowns and artifical teeth (5) Gutta-percha points - dental silver amalgam (6) Dental investment of all types/phosphate bond/gypsum bond/plaster and stone (7) Dental X-ray film - intra-oral/extra-oral/panoramic/occlusal (8) Dental porcelain of all types (9) Acrylics for dental use - denture base material heat cure and cold cure (10) Waxes of all types for dental use. LIST 15 (See S. No. 192 of the Table) (1) Capacitors (excluding paper capacitors and power capacitors) (2) Ferrite parts including memory cores and ferrite magnets (3) Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC (4) Connectors (5) Magnetic - Heads (all types) (6) Loud speakers (cone type) (7) Deflection parts, namely : (i) EHT/LOT/FBT transformers (ii) Line driver transformers (iii) Deflection coil/yoke (iv) Linearity coil (v) Width coil (8) Ceramic/Magnetic cartridges and stylus (9) Air cored and Ferrite cored transformers (10) Microphones/Microphone cartridges (11) RF/IF coils, Inductance coils, Peaking coils, Tuning coils (12) Antennas (13) Relays of contact rating upto 7 amperes (14) EHT cables (15) Level meters/level indicators/tuning indicators/peak level meters/battery meter/VC meters/ Tape counters (16) Tape deck mechanism (17) Tone arms (18) Microwave passive parts (19) (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket (v) Spark gap (vi) Degaussing coil (20) Fibre optics and other optoelectronic parts and devices namely, Couplers, Attenuators, Connectors, Splicers, Multiplexers and Demultiplexers (21) Passive optical parts, namely, Microlens and splitters, Micropositioners, Optical filters and gratings and Phase plates (22) Special purpose optical fibres, namely, polarisation holding fibres, plastic fibres and large core fibres (23) Electron guns (24) Liquid crystal displays. LIST 16 (See S. No. 193 of the Table) (1) (a) Laser rods - Neodymium : YAG, Neodymium : Glass, Ruby, Erbium : YAG, TI : A1203, Alexandrite, HO : YAG (b) Helium - Neon Laser Tubes (c) Semi-conductor visible lasers (d) Dielectric coated mirrors for visible, near IR 10.6 micrometer region (e) Hard dielectric coated optics including thin film polarisers, calcite polarisers and Beam splitters (f) ZnSe mirrors, ZnSe lenses and ZnSe windows (g) Gratings and prisms (h) Dye cells and laser dyes (i) Thin film polarisers for visible, near IR region (j) Electro-optic switches for visible, near IR and 10.6 micrometer region (k) Flash lamps (Xenon, Krypton) (l) Arc lamps (Krypton) (m) Second harmonic generation crystals (2) Energy storage capacitors (3) Thyratrons (4) Photodetectors and photomultipliers (5) Metering needle valves and pressure indicators (6) Spectrosopic grade pure gases viz., Xenon, Krypton, Fluorine, Argon (7) Vacuum pumps of capacity upto 20 litre per minute (8) Quartz and Special glasses (9) Non linear crystals (10) Electro-optic and Acousto-optic swtiches (11) Special materials, namely, High purity gases, Kovar, Alumina and Zirconia fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning material, Dyes and Pitch for optical polishing (12) Optical filters. LIST 17 (S. No. 194 of the Table) (1) Television cameras with portable field video recorders (professional grade) (2) Audio recording equipment (3) Table top post production video editing machines (4) Four source editing controllers to control editing machines (5) 8-channel video mixer/switches (6) Special effect generators for fading and superimposing of text and graphics (7) Time base correctors/Frame synchronisers (8) Broadcast standard 3-D computer graphic systems (9) Professional grade colour video monitors (10) Portable lighting equipment with lamps for shooting in low light situation (11) Professional grade photographic cameras of all formats (12) Dark room equipment including enlargers (13) Computer control editing machines (14) Spares and accessories of above mentioned equipment as permitted by the Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting. LIST 18 (See S. No. 211 of the Table) (A) Wireless Apparatus and Accessories - (1) HF, VHF, or UHF transreceiver (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form (2) VHF/VHF or VHF/UHF Repeater (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form (3) Transvertor for amateur frequencies in assembled or kit form (4) Grid Dip Oscillator, Radio Frequency Interference Filter, Balun Transformer, SWR bridge or reflectometer, Morse reader or Noise bridge (5) Antenna with or without feeders/Antenna rotators for amateur frequencies (6) Digital frequency counter (upto 600 MHz) with accessories. (B) Parts - (1) Transistors, diodes, integrated circuits/chips, thermionic valves or vacuum tubes (2) Toroidal cores, quartz crystals, relays, rotatory switches, ferrite beads (3) Variable condensers, air-dielectric type (4) Precision capacitors (fixed type) value(s) between 1pF to 5000 pF (5) Spare nicad cells or pack, as required or used with thermionic valves or vacuum tubes or toroidal cores (in the case of hand held transreceiver) (6) Slow motion tuning mechanism with or without dials. LIST 19 (See S. No. 221 of the Table) (i) Turntable ladders and Hydraulic Platforms of height of 30 metres and above (ii) Portable pumps of 45 H.P. and above, having 3500 RPM and above discharging 1500 LPM water and above (iii) Pneumatic lifting bags (iv) Explosive gas detection equipment with tubes (v) Rescue tools and gears (vi) Spares for maintenance of items at S. Nos. (i) and (ii). LIST 20(A) (See S. No. 231 of the Table) (1) Chlorine (2) Helium (3) Silicon tetra chloride (4) Germanium tetra chloride (5) Phosphorous oxychloride (6) Sulphur hexa flouride oxygen (7) Oligo-poly iso cyanate ethyl-acetate solution (8) Colouring ink for fibre (9) Binder of polyurethane or vinyl chloride-vinyl acetate copolymer (10) UV resin-1/UV resin-2 (11) Nylon-12 granules/chips for sheath/loose tube (12) Coloured nylon-12 (13) Elongated polyethylene tape (14) Polyester tape (15) Nylon thread (16) Polyethylene cord (17) Biaxilly oriented nylon tape (18) Silica tube/rod, other than preform. LIST 20(B) (See S. No. 231 of the Table) (1) E-glass yarn/roving for FRP (2) UV resin for FRP (3) Complex high molecular weight resin in acrylate solution for FRP (4) Acrylated monomers (5) Photoinitiater (6) Tert butyl perbenzoate (7) Zinc soap of long fatty acid mixture (8) Modified polypropylene (9) Ethylene acrylic acid (EAA). LIST 21 (See S. No. 236 of the Table) (1) Calorimeter for semen analysis (2) Phase contrast microscope (3) Photometer for semen analysis (4) Ovucheck pregnancy detecting kit (5) Freeze drier (6) Tuberculin syringe (7) Programmed biological freezer (8) Automatic semen analyser (9) Semen straws (French medium and mini) (10) Sheath for French mini straws (11) Cryo containers above 60 litres capacity (12) Liquid nitrogen tankers above 500 litre capacity. LIST 22 (See S. No. 244 of the Table) (1) Australia Antigen RIA kit (2) Cardiac catheters with guidewires (3) Clips for aneurysms and clips applying forceps in Neuro-Surgery (4) Cardio vascular sutures (5) Cardio vascular special instruments, namely :- (i) Coronary perfusion cannulae (ii) Electrical or gas operated sternal cutter (iii) High pressure stop cocks and connectors for pressure recording (iv) Vascular bull-dog clamps (v) Vascular clamps (vi) Vascular needle holders (vii) Vascular scissors straight or angled (viii) Vascular tissue forceps (6) Compressed air breathing apparatus complete (7) D.C. Difibrilators for internal use and pace makers (8) Laryngeal Mask-Endotracheal Tube (9) Haemodialysors (10) Heart lung machine (11) Heart valve prothesis including valve frames (12) Nebulized humidifier (13) Hydrocephalus shunts (14) Hyper-baric oxygen chamber (15) Fogarty and embolectomy catheters (16) Implantable cardiac pacemakers (17) Intra-arterial catheters and guidewires and material for intervention radiology (18) Intra-cardiac patches (19) Nebulizers (excluding ultrasonic nebulizers and heat nebulizers) (20) Omayya reservoirs for intraventicular investigation/therapy (21) Operating sets for Percutaneous Nephrostomy and Percutaneous removal of kidney stones with continuous irrigation and suction with ultrasonic Lithotrite, etc. (22) Ostomy products (Appliances for managing Colostomy, Illcostomy, Ureterostomy, Illeal Conduit Urostomy Stoma cases such as bags, belts, adhesives seals or discs or rolls adhesive remover, skin barriers micropore surgical tapes, bag closing clamps karaya seals paste or powder, irrigation sets, plastic or rubber faceplates, flanges, male or female urinary incontinency sets, skin gels, in parts or sets (23) Oxygenator (24) Plastic disposable 3-way connectors (25) Portable intermittent positive, pressure breathing apparatus (26) Pulmoflator (27) Respirators including ventimeters (28) Sengstaken tubes (29) Tracheostomy tubes (30) Ventilator used with anaesthesia apparatus (31) Vascular grafts (32) Tracheostomy tube of plain PVC, Low pressure PVC, Red Rubber Plain, and Red Rubber cuffed (33) Various types of Cardiac Catheters including balloon tipped, double Lumen and PTCA catheters, balloon dilatation catheters and Endomyocardial biopsy forceps (34) Disposable and non-disposable cannula for aorta, vena cavae and similar veins and blood vessels and cannula for intra-corporal spaces (35) Programmer for pacemaker (36) Ancillaries for blood component therapy required for the treatment of cancer, namely, Y type blood solution recipient set; Transfer pack 1000 ml. and 300 ml.; disposable pherasis bowl 225 ml. and 373 ml.; hydoxy ethyl starch solution; wasting harness with bypass; and waste bags (37) AIDS (Acquired Immune Deficiency Syndrome) test kits; Enhanced luminescene analysers for AIDS, Hepatitis and other Analyses (38) Iridium wire (39) Anti-HLA sera (AB-CDR) (40) T.P.H.A. Kits and AIDS diagnostic kits (41) Gamma knife (42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy (43) Cell separator (44) Pressure Transducer and Pressure Amplifier (45) Cell Saver (46) Continuous Ambulatory Peritoneal Dialysis Solution Bag along with tubing system (47) Craniotome (Pneumatic and Electric Equipment) and Drills (48) Binocular Loupes (49) Intra Aortic Balloon Pump (50) Remote After Loading Brachy Therapy Equipment (51) Dosimetry System (52) Cell Saver Equipment (53) Cell Washer (54) Thawer Equipment for Blood Warming (55) Mammography Unit (56) O 2 Concentrator (57) Ventricular Assist Device (58) Pace Maker (59) Activated Clot Time Machine (60) Cobalt Therapy Unit (61) Colour Doppler Ultrasound Scanner (62) SPECT Gamma Camera (63) Deep Therapy Unit (64) Cardiac and Vascular Angiography System including Digital substraction Angiography (65) Pulse Oximeter (66) Blood Gas Analyser (including cartridges, if any), Sodium Potassium Analyser, Auto Analyser for enzymes, drug levels and biochemical investigations, or a combination of two or more of the aforesaid (67) Ultrasonic Surgical Aspirator (68) Intra Cranial Pressure Monitoring Equipment (69) Radio Therapy Simulator (70) Treatment Planning System (71) Angiography Contrast Agent (72) Mobile Image Intensifier (73) Magnetic Resonance Imaging System (74) Surgical Laser (75) Electro Hydraulic Operating Table for Cardio Throacic and Neuro Surgery (76) Implants for pain relief and bladder control (77) Artificial electronics larynx instruments (78) Ventilators other than those used with anaesthesia (79) Digital Video EEG System (80) Instruments and implants for severely physically handicapped patients and joints replacement and spinal instruments and implaints including bone cement (81) Small portable pumps used for giving slow infusion of anti-cancer drugs or thalassaemic drugs. LIST 23 (See S. No. 247 of the Table) (1) Ophthalmoscope-Direct/Indirect (2) Ophthalmic/Xenon Arc (3) Flurescein Angiography Equipment including Fundus Camera (4) Ultrasonic Equipment (A scan/Pacchy meter) (5) Microsurgical needles, cannulas, blades, trephine blades, membrane peelers, diathermy probes, vitreous cutters, atraumatic needles and sutures, intracular scissors and forceps (6) Tonometer (Schiotz/Applanation/Pneumo) (7) Retinoscope streak/spot (8) Operating glasses (2X, 4X, 6X)/Binomag (9) Gonioscope, 3 mirror lens, special lenses for laser delivery, special diagnostic lenses (14D, 20D, 90D), Endo lens (10) Sterilisers (high speed/ethylene) (11) Specular microscope with monitor and recorder (12) Intraocular lenses/Keratoprosthesis/orbital implants (13) Diathermy equipment (14) Synoptophore (15) Silicone Sponges/rubber/bands, for Retinal Detachment Surgery (16) Vitrectomy equipment (17) Phaco-emulsification system (18) Visual field recording equipment (19) Ocular electro physiological testing equipment [Electroretinography/Electro-culography/Visually evoked response equipment (ERG/EOG and VER)] (20) Keratometer/Automatic Keratometer (21) Prism bars (22) Laser Interferometer (23) Pacchymeter - optical/electronic (24) Aspiration - irrigation equipment (25) Automatic refractometer or lensometer/projection lensometer or a combination of the aforesaid (26) Complete refraction unit with phoropter/projection-chart (27) Ophthalmic hydraulic chair (28) Low visual aids and sets (telescopic glasses) (29) Colour vision testing equipment (30) Photoelectric keratoscope and thermokeratoscope (31) Pseudo-isochromatic chart book/Ishiare (32) Slit lamp biomicroscope/photo slit lamp (33) Surgical operating zoom microscope with closed circuit TV camera (34) Surgical operating microscope manual (35) Argon/krypton laser (36) Yag laser, excimer laser or diode laser. LIST 24 (See S. No. 248 of the Table) (1) Otoscope (2) Impedance Audiometer (3) BERA (Brain Evoked Response Audiometry) (4) Speech Audiometer (5) Surgical Operating Microscope (6) Fresnel's glasses (7) Magnifying Operating Glasses (Magnifying Loupes) (8) Dental engines, Micro motors, handpieces, ENT Burrs, Steel Burrs, Tungsten Burrs, Carbon Burrs with Titanium coating (9) Microsurgical instruments for all Ear surgeries (10) Sialistic sheet used for Tympanoplasty operations (11) Sinoscopes 0o, 30o, 70o, 120o (2.6 mm and 4 mm diameter) (12) Instruments for Endoscopic Sinus Surgery (13) CCD Camera, Monitor, VCR to fit with Sinoscopes (14) Cochlear Implants and equipment for performing Cochlear (15) Voice Prostheses (16) Blom Singer Voice Prostheses (17) Electronic Larynx (18) Sigel's Speculum (19) Microlaryngeal instruments (20) Microlaryngoscope (21) Fibroptic Flexible Nasal Pharyngo Laryngoscope (22) Fibroptic Flexible Laryngo Bronchoscope (23) Video Laryngo Bronchoscope and Video Oesophago Gastroscope (24) Stroboscope (25) Fibroptic Flexible Oesophago Gastroscope (26) Video Processor (27) Video Cassette Recorders used along with the Video Endoscope LIST 25 (See S. No. 249 of the Table) (1) 12 (+/- 1) mm Laparoscope (Single incision) (2) Falope Ring - applicator single incision (for two rings) and procedure instruction manual, kit containing guide and loader and cleaning brush (3) 12 (+/- 1) mm Trocar (including piston type) with spare washers for sleeve and canulae and cleaning brush (4) Fibre Optic Light Cable (5) Bulbs, fuse lamps, Adapter for Fibre Optic Light Cable/Laparoscope (6) Carbondioxide (CO 2) cylinder with pneumoperitoneum apparatus (7) Light Source (8) Machine for Gas Insufflator with Gas Tubing Spare Carbondioxide (CO2) Hose Pipe and a Gauge (9) Verres Needle (4" and 5-1/2") (10) Minilight source with accessories consisting of :- (a) 6 volts rechargeable battery (b) AC battery charger (c) AC power supplier 220 volts (d) Inter-connection assembly (e) Convertor (11) Falope Rings (12) 6-8 mm Laparoscope (double puncture) (13) Dual incision applicator Two rings (14) Trocal and Cannula 6-8 mm with valves gas stopcock (15) Probe 34-37 cm (16) Scissors 34-37 cm (17) Suction Cannula 34-37 cm Notes :- (A) Item Nos. 6, 7 and 8 may be imported separately or in combinations as dual control assembly. (B) Item Nos. 1 and 2 may be separate or in combination. When in combination, it is called Laparocator. LIST 26 (See S. No. 251 of the Table) A. (1) Braille writers and braille writing instruments (2) Hand writing equipment Braille Frames, Slates, Writing Guides, Script Writing Guides, Styli, Braille Erasers (3) Canes, Electronic aids like the Sonic Guide (4) Optical, Environmental Sensors (5) Arithmetic aids like the Taylor Frame (arithmetic and algebra types), Cubarythm, Speaking or Braille calculator (6) Geometrical aids like combined Graph and Mathematical Demonstration Board, Braille Protractors, Scales, Compasses and Spar Wheels (7) Electronic measuring equipment, such as calipers, micrometers, comparators, gauges, gauge blocks Levels, Rules, Rulers and Yardsticks (8) Drafting, Drawing aids, tactile displays (9) Specially adapted clocks and watches B. (1) Orthopaedic appliances falling under heading No. 90.21 of the First Schedule (2) Wheel chairs falling under heading No. 87.13 of the First Schedule C. (1) Artificial electronic larynx and spares thereof D. (1) Artificial electronic ear (Cochlear implant) LIST 27 (See S. No. 164 of the Table) 1. All types of Refinery Process Units including distillation (CDU, VDU, Condensate Fractionator); thermal cracking (Delayed Coker, Visbreaker, Flexicoker); catalytic cracking (FCC, Hydrocracker); lube processing (Deasphalting, Dewaxing, Solvent Extraction); hydro-desulphurisation/ hydrotreating (Naphtha, Diesel, VGO, ARDS, LC Fining, H. Oil); alkylation; isomerisation; catalytic reforming; treating (Merox, Amine); recovery (Propylene, Ethylene, Butane); synthesis (MTBE, TAME); gas concentration plant; bitumen blowing; sour water stripping, extraction (Pentane, Hexane, BTX). 2. All types of Hydrogen Generation, Recovery and Purification Plants; Sulphur Recovery Plants including Tail Gas Treatment Units; with associated components and equipments, including reactors (like shift, Claus, hydrotreater, CBA, desulphurizer), furnaces, steam reformers, waste heat boilers, condensers, Pressure Swing Absorption (PSA) systems, incinerators, vessels, boilers, pumps, compressors, drivers; alongwith associated instrumentation and control systems and auxiliaries (skidded or otherwise). 3. All types of Utility Systems, including Nitrogen Systems comprising of generation, storage and vaporization plants; Flare Systems comprising of flare tips, stacks, seal drums, knockout drums and pumps; Refrigeration Systems comprising of compressors, refrigerant storage and heat exchangers; Emergency Power Systems comprising of generators, UPS and batteries; with component equipments and all systems auxiliaries, instrumentation and control systems. 4. All types of Process Sub-systems, including Continuous Catalyst Regeneration Systems for Reformer; Recovery Plus Systems for Reformer; Power Recovery Train Systems for FCC; Feed Nozzles for FCC, Vapour Recovery Systems; Cryogenic Systems for LPG either supplied separately or as a whole, with component equipments, drivers, instrumentation and control systems, and auxiliaries. 5. All types of Water Handling Treatment Systems, including sea water intake systems comprising of sea water band screens; Desilting systems for still basin; Sea Water filtration/Chlorination Systems; Desalination plants; Cooling Water Towers; Demineralization plants; Condensate Polishing Systems; Deaerators and Potable Water Systems; and all component equipments, vessels, pumps, vapourisers, condensers, filters, eductors, heat exchangers, drivers, screens, framing structures, gates, instrumentation control systems, activated carbons, ion exchange resins, resin traps, additive injection systems and auxiliaries, (skidded or otherwise). 6. All types of Effluent Solids/Liquids/Gaseous Processing, Handling, Control, Abatement and Disposal Systems, including plate interceptors, dissolved air floatation devices, skimmers, hydrocyclones, clarifiers, chemical dosing systems, acid treatment and biological treatment systems; Spent Caustic Neutralisation Systems and Sewage Filtration/Treatment Systems; with component equipments, instrumentation control systems. 7. All types of Air Handling Systems and Equipments, including plant/instrument air compressors, FD/ID fans, blowers, dehumidifiers, pneumatic systems, mixers, dryers, intake filters, vents, silencers, cyclones, stacks, manifolds, ducts; with drivers, auxiliary seal/lube/control oil systems, instrumentation control systems. 8. All types of Fired Heaters and Boilers, with radiant coils and sections, transfer line assemblies, convection coils and sections, cross over/jump over pipes, fittings, tube sheets, tube supports, refractory materials, structural steel supports, casings, stacks, dampers, soot blowers, ducting systems, gas/oil/dual burner assemblies, burner tiles, waste heat boilers (WHB), steam generators, economizers, air/fuel preheat systems, FD/ID fans, fuel gas/oil skids; and including LPG vaporizers, steam superheaters, heat recovery steam generators, electric heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal incinerators, coke feeders, limestone feeders, ESP/baghouse filters; alongwith associated instrumentation control systems, including burner lighting, flame detection and burner management systems. 9. All types of Compressors, including axial, centrifugal, diaphragm, reciprocating, rotary screw and sliding vane type compressos; for gas, air, hydrocarbon and all special services including FCC Power Recovery Trains (PRT); LPG vapour return blowers; with drivers of motor or steam turbine or expansion turbine or engine or gas turbine or hydraulic turbine types; speed governor systems, seal/lube/control oil systems (skidded or otherwise), gear assembly, bearings, barring gears, clutch, couplings, intercoolers, after coolers, suction filters; instrumentation control systems including vibration monitoring anti surge control, inlet guide vane control, sequencer control, control panel and machine condition monitoring systems. 10. All types of Heat Exchangers, including shell and tube, double pipe, kettle, plate welded plate, high pressure (breech lock), Armstrong and brazed types; with plain or fin or High Flux or U tubes for cooling intercooling, trim cooling, chilling, condensing, crystallizing, heating, vaporizing or reboiling services; with tubes, tube sheets, head assemblies, shells, flanges, bolts nuts, gaskets, baffles, tie rods; instrumentation and control systems. 11. All types of Air Cooled Exchangers, for cooling, intercooling, trim cooling, chilling and condensing services; with plain/finned tubes, of carbon steel, admiralty brass, alloy steel, stainless steel; monel or titanium or other materials; with fans, fan drivers, structural steel support frameworks, instrumentation and control systems, anti vibration systems. 12. All types of Agitators and Mixers, including static, jet, dilution types; motor drivers, aeration systems; with instrumentation control systems. 13. All types of Filters, Screens Strainers; including backwash, bucket, carbon, cartridge, duplex, pressure/mechanical, rotary, drum, sand, sock/bag, vacuum types, and special FCC net bottoms catalyst filters; screens, strainers, demisters and sea water clarifiers; with instrumentation control systems. 14. All types of Vacuum Producing Equipments, including ejectors, educators, venturies; with instrumentation control systems. 15.All types of Materials Separation systems, including cyclones, centrifuges, coalescers, dust collectors, electrostatic precipitators, oily water separators, flocculators; and specialized systems of Crude Oil Desalters, Reactor Cyclones and Regenerator Cyclones for FCC, third Stage Separators and Fourth Stage Cyclone Separators for FCC; with vessel internals, grids, distributors, supports, instrumentation control systems. 16. All types of Materials Transporting Equipments, including loading unloading arms and racks; gantries, dispatch tanks, loading/transfer pumps, hydraulic systems, weigh bridges, Diesel shunters, feed or injection or spray nozzles, skimmers, soot blowers, with instrumentation control systems, including load cells and metering stations. 17. All types of Electrical Equipments including switchyard equipments, transmitters, relays; solar power systems, including solar panels, batteries and charger; phase shift monitors, motor or steam turbine generators, protection relays for generators, auxiliary seal/lube/control oil systems; actuators, annunciators, lighting masts, lighting fittings, panels; batteries and battery chargers; bus ducts; all types of cables including power/instrument/compensating/fibre optic/coaxial/control cables; cable joints, capacitors, distribution boards, fittings, substations, grounding/neutral resistors; heat tracing systems including insulation; microprocessor based process controllers; local control stations, motor control centres, power control centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT transformers, UPS and variable speed drivers over current protection devices, instrumentation and control systems including load distribution and management systems and auxiliaries, (skidded or otherwise). 18. All types of Materials Handling Equipments including belt or pneumatic conveyors, ducts, hoists, bucket or jib cranes, (with or without gangways), pipe and hoses, funnels, hoppers, disengaging lock hoppers, catalyst addition pots, valves and sampler devices; bagging, weighing and bag stitching systems; weigh bridges; buoy systems for crude oil receipt; pipeline and manifolds with valves, fenders, mooring aids, laser docking systems, product tanker loading facilities; with associated equipments, instrumentation and control systems, and auxiliaries. 19. All types of coke handling and storage equipments, including coke crushers, coke cutting systems, coke drum unheading devices, coke drum switching systems, coke conveyors, stackers and reclaimers, silos/hoppers, dust abatement systems, belt weighers; Sulfur Handling and Storage Equipments and Sulphur Granulation or Flaking or Prilling Systems with associated equipments, instrumentation and control systems and auxiliaries. 20. All types of Product Filling Systems, including LPG bottles filling machines and bitumen drum filling machines; and associated equipments, instrumentation and control systems and auxiliaries. 21. All types of injections and Dosing Packages, for Injection or metering or dosing of chemicals, additives, inhibitors, odourisers, oxygen scavengers, blocides, chlorine, polymers, caustic, acids, emulsifiers, antifoams or antifoulants, with their component equipments, like drums, tanks, pumps; instrumentation and control systems, auxiliaries (skidded or otherwise). 22. All types of Pumps, including API or non-API, centrifugal, diaphragm, in-line, jockey, vertical, booster, barrel, gear, Sundyne, Screw, ram, reciprocating or submersible types; single stage or multistage types; for petroleum crude or intermediate products or petroleum products and by-products; water including sea water and boiler feed water; chemicals, slops or sludge services; liquid booster for LPG (cryogenic); with motor or steam turbine or hydraulic turbine or diesel engine drivers; and instrumentation and control systems, auxiliaries, including seals flushes, gear boxes, water cooling harnesses and lube oil consoles. 23. All types of Tanks and Storages, including plate materials, flanges, fasteners, nozzles, fittings and other components for assembly/ construction/ erection at site; and instrumentations, including relief, breather and rim vent values; nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors and automatic tank gauging systems; for oil, hydrocarbon (petroleum crude, products, by-products, intermediate and blend components), water, chemicals, slops, sludge storage in either cone, fixed, floating, dome or internal floating roof configurations; solids storage in silos, bins or hoppers and LPG/propylene/ethylene/propane/butane storage in spheres, bullets or cryogenic tanks; and instrumentation and control systems. 24. All types of Columns, either supplied separately or together; comprising of grids, screens, distributors, nozzles and their supports/fasteners and accessories; for services like absorption, desorption, stripping, fractionation, distillation, splitting, stabilization, extraction, washing or scrubbing services; and column internals comprising of trays either bubble, jet, multi downcorner (MD), sieve or valve trays; or either random or structured type packings; and their appurtenances, instrumentation and auxiliaries. 25. All types of Vessels and Drums, either supplied separately or together, comprising of shells, heads, internals, grids, screens, demisters, coalescers, boots, distributors, packing and their supports/fasteners and accessories, for storage, separation, reaction, mixing, decoking, degassing, flashing, draining, blow down, desuperheating, drying, sealing, receiving, surge and interface controlling services; and their appurtenances, instrumentation, insulation and auxilaries. 26. All types of Reactors, either supplied separately or together, comprising of shells, heads, catalysts, support materials, grids, screens, demisters, coalescers, distributors, packings and supports/fasteners and accessories; for carrying out cracking (FCC Reactor and Spent Catalyst Stripper), coking (Coke Drums), visbreking, hydrotreating, hydrodesulphurization, hydrocracking, catalytic reforming (Platformer), shift, sulphur (Claus), adsorption (CBA, PSA), oxidizing, treating (Merox), regenerating (FCC Regenerator/Combustor), desulphurising reactions; spray and mixing nozzles and their appurtenances, instrumentation and auxiliaries. 27. All types of instrumentations, including various types of level/ pressure/density/temperature/flow instruments, detectors, level/pressure/ draft/temperature gauges, capacitance/level/limit, proximity switches, transmitters, annunciators, controllers, converters, transducers, temperature sensor assemblies, load cells, orifice assemblies, rotameters, pitot tubes, venturies, meter runs, control/metering panels, pneumatic/motorised/ hydraulic/piston actuators, recorders, solenoid operated valves, transmitters, thermocouples, temperature elements, sight glasses, amplifiers, annunbars, barriers/isolators, all types of flow meters, custody transfer meters, meter provers, density meters, electromechanical/magnetic/nuclear/radar/ultasonic level indicators, weighing and bagging systems and test equipments for testing and calibration of above instruments. 28. All types of Transmitters and Monitors, including electronic transmitters for measurement of level, pressure, flow speed, temperature and weight; and monitoring systems for ambient air, fugitive emissions, pipelines, speed, stack emissions and vibration. 29. All types of Control Equipments, including ball/butterfly/gate/ globe/needle/plug/bellow sealed type control valves; shutdown valves, self actuating, solenoid, on/off, fast acting quarter turn, pressure regulating, breather and pressure/vacuum relief valves; pilot operated safety valves, and valves for specialised services, such as catalyst addition systems and lock hopper control systems. 30. All types of Control Hardware and Software Systems, including Distributed Control Systems (DCS), Emergency Shutdown Systems (ESD), Programmable Logic Controllers (PLC), Security Access Systems, Terminal Automation Systems, Advanced Process Control (APC) Systems with Real Time Optimizer (RTO), Supervisory Control and Date Acquisition (SCADA) Systems, and Refinery Information Management System (RIMS) with operator panels, computers, date loggers, interfaces, relay cabinets, engineering controls, large display screens, microwave transmission and receiver equipments, logic multipoint recorder/multiplexers, and their hard ware and software. 31. All types of Fire Gas Detection Systems, consisting of LEL/fire/ smoke/UV/gas/IR/toxic detectors; panels, cables, weather protection housing, junction boxes, detector cards, cabinets, calibration equipments, beacons and lights, and their hardware, and software. 32. All types of Pipes, Tubes and Hoses, including cladded, coated, lined; made of carbon steel, low temperature carbon steel, alloy steel, stainless steel, GRP, copper, aluminium HDPE, PP, fibre glass, monel incolloy, titanium or any other materials; and other in seamless or welded construction, for all applications fields joint coating materials; with instrumentation and control systems like pipeline surge relief systems; auxiliaries, painting and insulation. 33. All types of Pipe Fittings, including elbows, connectors, tees, pipe fabrication accessories, spargers, nozzles, plugs, packing glands, rings, flanges, gaskets, supports, pads, manifolds, siphons, shock absorbers, struts, fasteners; mitre/long radius/short radius bends; sockolets, weldolets, spray nozzles, graylock fittings; swagelock/compression fittings; insulating kits, special steam traps, liquid float traps, bellows, flexible hoses, couplings, vent silencers; and speciality items like Teflon sliders, standpipe expansion joints, spring supports/hangers, scraper tees; pipeline and manifolds with valves; cleaning/scraping/monitoring pigs; pig launcher, pig receiver and pig detection system; cathodic protection system with sacrificial anodes and CP monitoring system; with instrumentation and auxiliaries. 34. All types of valves, including ball, butterfly, check, diaphragm, gate, double disc or knife gate, globe bellow sealed globe, jacketed, plug, through conduit type valves; with manual/gear/motor/hydraulic operations; for oil, water, steam, hydrocarbon, chemical, cryogenic, subsea, nitrogen blanketing and thermic fluid services; and specialised services valves, like FCC butterfly valves, Cooker switch valves, standpipe slide valves, flue gas divertor valves, pressure reducing station systems, pipeline and manifolds and riser tie-in manifolds. 35. All types of Gaskets and fasteners, including anchor/foundation/structural bolts; flanges, studs, nuts, washers; and metallic/soft/spiral wound gaskets and O-rings. 36. All types of Structural Steels, Materials and Plates including carbon steel/LT carbon steel/alloy steel/stainless steel plates; bars, rolled sections, tubular sections, HYSD bars, dampers, prefabricated tresties, pipe bridges with pre-installed pipes, loading platforms, steel A frames, blast proof doors; steel tubulars, seamless welded; special steel piles; dolphins; low, medium and high strength steel, fasteners; and special application refractory/copalite/ sulphide resistant quick setting cements. 37. All types of ferrous or non-ferrous pre-fabricated/semi fabricated, Plant Structures, including pipe racks, supporting frames, tresties, pipe bridges with pipes pre-installed and pre-insulated. 38. All types of Analyzers, either on-line or off line; for measurement of H 2S, Oxygen, NOX, SOX, CO2, CO, hydrocarbon, dew point, density, conductivity, pH, combustible gases, oil in water, vapour pressure, silica, sodium, distillation, flash point, moisture, viscosity and smoke point; and analyzer sampling systems/cubicles; analyzer houses with sample conditioning systems, sample probes/sensors, tubings, HAVC systems, calibration gases cylinders and Drager tubes. 39. All types of Laboratory Equipments, including sampling, quality control and analytical equipments for testing and measurement of various petroleum crude/products/by products quality parameters; and including sample collection equipments, gas/ion chromatograph, CFR engines for octane cetana number, pulse NMR, spectrophotometers of different types, distillation equipment systems, analyzer management systems and laboratory information management systems; with instrumentation, auxiliaries, hardware and software. 40. All types of Safety and Fire Fighting Equipments, for safety of personnel and plant machinery including fire suits, fire monitors, Q.B. bulbs, spray nozzles, ambient air monitors, heat and flame resistant clothings, portable extinguishers, deluge skid systems, explosimeters, rupture discs, fire fighting systems, fire tenders; foam systems with foam storage and monitor, transport and booms; snorkels, sprinkler systems, breathing air apparatus; fire proofing materials for passive fire protection of steel structures and oil spill protection booms, with auxiliaries. 41. All types of Communication Equipments, including cables, bone mikes, frequency synthesizers, meteorological instruments; microwave transmission and received equipments, public address systems, instrinsically safe walkie-talkies, UHF/VHF multi channel communication systems, radio telemetry systems, with remote telemetry units, portable units and PC based master telemetry units and antenna systems. 42. Initial charge of all types of catalysts, deslocants, zeolites, activated carbons, clay molecular sleeves, used in refining and processing of petroleum crude, petroleum products and by-products. 43. Software Support Systems, including training simulation systems, electronic documentation systems, CAD stations, date tapes; operation/maintenance/safety manuals; scanners, plotters, printers; software including licenses; specifications, drawings, technical literature, and their hardware and software. 44. Special Maintenance Systems, including hydrojetting tools, pneumatic torque wrenches; EOT/mobile cranes; hoists, grinders, high pressure cleaning systems, induction bending machines; auto welding machines, various welding equipments like girth welding, vertical flux cord, bottom saw, four side edge preparation, angle rolls; rolling and levelling machines, sky climbers, hot tapping machines, bolt tensioners, high pressure test pumps, tube bundles pullers, tube nippers, ultrasonic leak detectors, machine condition monitoring systems and associated sub-assemblies; vibration analysers and computerized alignments systems. 45. Sub-assemblies, tools, accessories, protective coating/paint materials, stores, spares, materials, supplies, consumables for running, repairing of maintenance of the goods specified in this List. LIST 28 (See S. No. 166) (1) Hot mix plant batch type with electronic controls and bag type filter arrangements more than 120 T/hour capacity (2) Electronic paver finisher (with sensor device) for laying bituminous pavement 7 m size and above (3) Slip form/fixed form paverfinisher for laying concrete pavement (4) Surface dressing equipment (self propelled) (chips spreader) (5) Slurry seal machine for filling up cracks in roads (6) Kerb laying machine (7) Mobile bridge inspection unit (8) Mechanical broom with blower (9) Toll collection and traffic control equipment (10) Electronic Total station instrument for topographic survey (11) Global Positioning System (GPS) Instrument (12) Stone crushing (cone type) plants (13) Concrete Batching plants 50 cum/hr or more. LIST 29 (See S. No. 171) (1) Radio communication equipment including VHF, UHF and microwave communication equipment of the following description, namely :- (a) wireless in local, loop system (excluding terminal equipment) (2) Apparatus, for carrier current line systems or digital line systems of the following description, namely :- (a) HDSL system (b) DLC system (c) SDH system LIST 30 (See S. No. 172) (1) Telephonic or telegraphic apparatus of the following description : (a) switching apparatus for cellular mobile telephone service. (b) base station controllers. (2) Radio communication equipment including VHF, UHF and microwave communication equipment with following description : (a) base transceivers stations (BTS) (3) Network management stations (4) Cellular repeaters (5) BTS ancillary equipment (6) Computers for billing and customer service (7) Voice mail service hardware (8) Short message service hardware (9) Automatic call distribution system (10) Transcoders (11) BSS test equipment LIST 31 (See S. No. 173) (1) Paging control terminal (2) Transmitter controller (3) Paging transmitter (4) Link transmitter/link repeater, monitor receiver (5) Link receiver (6) N+1 Arbitrators for the above, hot standby panel (7) Combiners (8) Automatic monitoring system (9) Network management control system (10) Integrated ACD/OAP system (11) Isolators (12) Cavity filters (13) Multicouplers (14) Directional power sensors (15) Communication analysers (16) Radio communication test set up, spectrum analyser, field strength meter (17) POCSAG or FLEX encoders (18) Global positioning system (19) Simul cast controller (20) Automatic call distribution equipment/system LIST 32 (See S. No. 174) (1) Satellite communication equipment (other than customer premises equipment) (2) Network management system.