9911796707
TMI BlogSION - HB Vol.2 AmendedX X X X Extracts X X X X X X X X Extracts X X X X ..... from Sl.No.A-2182 to A-2218 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1400, the new entries from Sl.No.C-1401 to C-1408 shall be added as per Annexure "C" to this Public Notice. FOOD PRODUCTS After the existing entry at Sl.No.E-72, the new entry as Sl.No.E-73 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS After the existing entry at Sl.No.H-400, the new entries from Sl.No.H-401 to H-406 shall be added as per Annexure "E" to this Public Notice. TEXTILE PRODUCTS After the existing entry at Sl.No.J-303, the new entries from Sl.No.J-304 to J-305 shall be added as per Annexure "F" to this Public Notice. 5. This issues in Public interest. (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE Copy to all concerned; By orders etc., (ASHUTOSH MISHRA) Dy. Director General of Foreign Trade Issued from File No.01/83/44/19/AM99/DES-IV Annexure "A" to the Public Notice No.3 Dated 5.4.1999. AMENDMENTS/CORRECTIONS Sl.No. Page No. Reference Amendments/Corrections (1) (2) (3) (4) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Chemicals Allied Products Sl.No.A282 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A282 Magnesium Glycerophosphate BPC 63 1 kg 1. Epichlorohydrine 1.16 kg 2. Methanol 3.69 Litre 3. Trisodium 3.50 kg Sl. No. Page No. Reference Amendments/Corrections (1) (2) (3) (4) 9. 51 Chemicals Allied Products Sl.No.A290 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A290 Metformin HCL BP 1 kg 1. Dicyanodimide 0.935 kg 2. Dimethyl Formamide 1.140 kg 10. 63 Chemicals Allied Products Sl.No.A391 The description of import item No.1 with quantity shall be amended to read as under:- "1. Erythromycin Thiocyanate OR 2.32 kg activity 1. Erythromycin Base 2.03 kg activity" 11. 68 Chemicals Allied Products Sl.No.A428 The ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 2. d)Glycol 0.015 kg 3. Zinc Oxide/Magnesium Oxide 0.023 kg 4. Titanium Dioxide 0.007 kg (1) (2) (3) (4) 19. 216 Chemicals Allied Products Sl.No.A1688 The description of the import item 1 shall be amended to read as under:- "Relevant Synthetic Rubber / EPDM" 20. 225 Chemicals Allied Products Sl.No.A1723 The description of the import item 1 shall be amended to read as under:- "Rayon/Polyester/Nylon/Kevlar Cord/Raw Cotton/Warp Sheet (dipped or undipped)". 21. 230 231 Chemicals Allied Products Sl.No.A1742 The description of the import item 8 alongwith quantity shall be amended to read as under:- "8. Clove Oil - 0.005 kg". 22. 240 Chemicals Allied Products Sl.No.A1782 The quantity of the export product shall be corrected to read as "1000 Meters". 23. 248 Chemicals Allied Products Sl.No.A1833 The description of the import item 1(a) shall be amended to read as "Steel Blades". 24. 250 Chemicals Allied Products Sl.No.A1841 The import item 1 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... . 275 Chemicals Allied Products Sl.No.A2046 The quantity of import item no. 4 shall be amended to read as "0.685 kg". 33. 278 Chemicals Allied Products Sl.No.A2069 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2069 Iopamidol Tech 1 kg 1. 2,4,6 - Tri-Iodo 5-Amino Isophtha-loyl Chloride (Atipa Chloride) OR 1.65 kg i)Isophthalic Acid 1.40 kg ii)Iodine 2.16 kg iii)Isopropyl Alcohol 0.60 kg iv)Thionyl Chloride 1.86 kg v)Activated Carbon 0.10 kg 2. 2-Amino-1,3- Propandiol (Seriniol) OR 0.45 kg i)Nitromethane 0.48 kg ii)Para Formal-dehyde 0.48 kg iii)Iso Propyl Alcohol 0.90 kg iv)Methanol 1.14 kg 3. S(-)-2-Acetoxy Propionyl Chloride 0.85 kg 4. Isopropyl Alcohol 1.27 kg 5. Methanol 1.25 kg 34. 279 Chemicals Allied Products Sl.No.A2076 The norm covered by this entry shall be substitued by the following:- ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... he import item 3(c) shall be amended to read as under:- "Copper Lined Mould/ Copper Mould for Casting". 4. After import item 3(l)(x), the following item with quantity shall be added:- "(xi)Silica Texture bellow Shroud". - 0.0052 Kgs 41. 516 517 Engineering Products Sl.No.C527 1. The description of import items at Sl.Nos. 6 and 7 shall be amended to read as under:- "6. Diamond/Compax Dies or Blanks 7. Used/new Plastic Bobbins/ Spools". 2. After import item 7, the following item with quantity shall be added:- "8. Inconel Pipes/Tubes - 2 kgs" 42. 525 Engineering Products Sl.No.C593 The description of the export product shall be amended to read as under:- "Carbon Steel Submerged Arc Welded Pipes as per API Grade/ASTM Grade or equivalent OR Hot Formed Steel Bends as per API, ASTM Grade or equivalent grade Degree: 0-180 Degree." 43. 526 Engineering Products Sl.No.C599 The description of the import item 1 alongwith quantity shall be amended to read as under:- "Alloy Steel Rounds/Rods - 1.15 MT OR Alloy Steel Billets - 1.20 MT". 44. 527 Engineering Products Sl.No.C614 The d ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Upto 5% of FOB value of export (1) (2) (3) (4) 50. 570 Engineering Products Sl.No.C902 1. The description of the export product shall be amended to read as under:- "Galvanised/Perforated Alloy Steel C.A. Tubular C- Connector (Insulated) for Transmission Lines". 2. The description of the import item 1 alongwith quantity shall be amended to read as under:- "ERW Steel OR 1.26 MT HR Coil/Sheet 1.6mm to 5mm". 1.49 MT 51. 598 Engineering Products Sl.No.C1014 Import item 3 alongwith quantity shall be substituted by the following: - "3. Miscellaneous Items:- a)Grinding Wheel (with or without frame work) b)CBN/Diamond Honing Stick Blank/Support Stones/Deburring Tools c)Carbide Cutter d)Plain Grinding Wheels/CBN Wheels" Upto 3% of FOB value of export. 52. 616 Engineering Products Sl.No.C1064 1. The import item 3, shall be amended to read as under:- "3. Miscellaneous items: Gun Drill, Micro Drill, Quick Spirol Drill, Grinding Wheel (with or without frame work), Lapping Compound, Letter/ Number Inscription Punch and Honning T ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... n Peroxide *0.010 kg 7. Eulan Wa/Moth Proofing Agent 0.01 kg 8. Potassium Bichromate 0.005 kg 9. Sodium Hydrosulphite/Amonium Sulphite 0.030 kg 10. Polyvinyl Alcohol (to be allowed only for Hand Tufted Woollen carpets) 0.05 kg 11. Sodium Chlorite/Lyogen SMK 0.04 kg 12. Thinner 0.005 kg 13. Caustic Potash 0.14 kg 14. Dyes Stuffs (Acid/Metal complex) 0.043 kg 15. Natural Latex (to be allowed only for Hand Tufted Woollen Carpets) 0.15 kg *Out of which, quantity of Hydrogen Peroxide shall not exceed 0.001 kg. Note.1 Against export of Multicoloured Designed Hand Knotted Woollen Carpets, the following items with quantity may be allowed per 1000 kgs of export within the overall CIF value upto 0.5% of FOB value of export:- "Paper with/without Graph - 150 sq.mtr., Colour Pencil/ Pencil with lead - 1 Piece, Graduate Flexible Curves/ Scale - 1 Piece, Pen Drawing/ Art/ Rapidograph/ Sketch/ Marker - 1 Set, Instrument Box containing compass set, pencil, Lead, Scale, Rubber, Sharpner, Scriber and Cutter work shap - 1 Set, Nibs mapping/ Scrip/ Print Timer wit ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... kg 2. PVC Plasticizer (DOP) 0.323 kg 3. Blowing Agent 0.028 kg 4. Titanium Dioxide/Pigments 0.0433 kg 5. Processing Aid 0.0820 kg 6. Release Paper 0.50 Sq.mtr. (1) (2) (3) (4) 68. 860 Plastic Products Sl.No.H320 The word `(Pidicryl K-117)' in the description of the export product shall be deleted. 69. 873 Plastic Products Sl.No.H388 In the description of the export product the word "Polyethelene" shall be corrected to read as "Polyethylene". 70. 881 Textile Products Sl.No.J10 The norms covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) J10 Acrylic/Cotton Dyed Yarn 1 kg 1. Acrylic Fibre 1.06 kg/kg content in the export product. 2. Acrylic Dyes of 100% strength 2% of weight of Acrylic content in the export product. 3. Reactive/Vat Dyes of 100% strength 1.5% of weight of Cotton Yarn content in the export product. (1) (2) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... roduct. 11. Nylon Tops 1.08 kg/kg content in the export product. 76. 930 Textile Products Sl.No.J255 The description of the export product shall be amended to read as under:- "Dyed/Dyed and Printed Fabrics/Sarees". 77. 956 Miscellaneous Products Sl.No.K97 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) K97 Pre-Lubricated Jute Rope/Core Rope (Multifold) containing 18% of Lubricants of Dry Jute Fibre weight 1 kg 1. Jute Fibre OR 1.08 kg/kg content in the export product. 1. Jute Yarn 1.03 kg/kg content in the export product. 2. Batch Oil 0.030 kg 3. Lubricants 0.200 kgs 78. 957 Miscellaneous Products Sl.No.K105 The description of the export product shall be amended to read as under:- "Black/Red Iron Oxide Pigment". 79. 960 Miscellaneous Products Sl.No.K119 (Introduced vide Public Notice No.52 dated 5.11.98) The description of the import item 1 shall be amended to read as und ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Pigment Red 5 (C.I.No.12490) 1 kg 1. N-N-Diethyl 4-Methoxymetanil Amide (Fast Red ITR Base) 0.434 kg 2. 5-Chloro-3-Hydroxy 2,4-Dimethoxy-2-Naphthanilide (Naphthol AS ITR) 0.601 kg 3. Sodium Nitrite 0.116 kg A2186 Pigment Red 17 (CI No.12390) 1 kg 1. 5-Nitro Ortho Toludide (Fast Scarlet G Base) 0.375 kg 2. Sodium Nitrite 0.170 kg 3. 3-Hydroxy 2-Naphtho-O-Toludide (Naphthol ASD) 0.684 kg A2187 Thio Diphenol 98% 1 kg 1. Phenol 1.652 kg 2. Sulphur Dichloride 0.905 kg 3. Toluene 0.931 kg A2188 Methyl Ethyl Ketone (MEK) 1 kg 1. Secondary Butyl Alcohol 1.05 kg A2189 Benzyl Albuterol 2(Tertiary Butyl-amine)-1-(4-Ben-zyloxy-3-Hydroxy Methyl Phenyl Ethanol) 1 kg 1. Sodium Dihydro BIS (2 Methoxy Ethoxy Aluminate 70% Active Toluene) (Vitride) 2.372 kg 2. Sodium Borohydride 0.156 kg 3. Selimium Dioxide 0.723 kg 4. Tertiary Butyl Amine 0.768 kg A2190 Nylon Phenol Ethoxylate 4 Moles 1 kg 1. Nonyl Phenol ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 0.139 KG 5. Antioxidants: Irgonox-1010/ Irgonox-3114/ Ethanox-330/ Ultranox-626/ Irgofos-168 1.717 KG 6. Additives: Hydrotalcite DHT-4A/Erucamide/Olemide/Gresil/ AB-720/Glceryl Monosterate (Myverol 18-6) Zinc Oxide/Acrawax 2.500 KG A2203 Pigment Yellow 14 (Non Rosinated) CI NO.21095 1 kg 1. 3,3 Di Chloro Benzidine 0.397 kg 2. Sodium Nitrite 0.217 kg 3. Aceto Acet Ortho Toludide 0.597 kg A2204 Dimethylamine Hydrochloride 1 kg 1. Dimethylamines 60% Solution 1.00 kg A2205 MG Colour Poster Paper containing 25% softwood pulp based on wood/bamboo 1 kg 1. Softwood Pulp 0.25 kg 2. Sodium Hydroxide 0.056 kg 3. Sodium Sulphate 0.055 kg 4. Chlorine 0.105 kg 5. Hydrogen Peroxide 0.009 kg 6. Lime 0.660 kg 7. Sulphur 0.001 kg 8. Sulphuric Acid 0.0007 kg 9. Rosin 0.016 kg 11.Alum/Non Ferric 0.050 kg 12.Deformer 0.003 kg 13.Relevant Papers Dyes/Colouring Agent(Natural/Kemwait/V-Blue/Yellow/Rhodamine Green/ ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... .31 kg 5. Tetrahydrofuran 4.29 kg 6. Trimethyl Iodosilane 6.62 kg 7. 2,2,2-Trifluoric Ethylene 3.29 kg 8. Sodium Borohydride 1.73 kg A2210 Sodium Sulphite 1 kg 1. Caustic Soda 0.705 kg A2211 Sodium Meta Bisulphite 1 kg 1. Caustic Soda 0.467 kg A2212 Sodium Bisulphite 1 kg 1. Caustic Soda 0.426 kg A2213 Organic Synthetic tanning Agent containing Phenol Formaldehyde condensate 57% Naphthalene Formaldehyde condensate 15% and (C4-C5) 13% dicarboxylic acid distillate 1 kg 1. Phenol 0.350 kgs 2. Formaldehyde 37% 0.448 kgs 3. Napthalene 0.084 kgs 4. Caustic Soda Flakes 0.164 kgs 5. Dicarboxylic Acid 0.130 kgs A2214 Organic Synthetic tanning Agent containing 66% Phenol Formaldehyde condensate 17% Naphthalene Formaldehyde condensate (Tystyntan to Base) 1 kg 1. Phenol 0.415 kgs 2. Formaldehyde 37% 0.529 kgs 3. Napthalene 0.096 kgs 4. Caustic Soda Flakes 0.193 kgs A2215 Sod ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... aneous Items: a)Stainless Steel Welding Electodes b)Carbon Welding Electrodes Upto 1% of the FOB value of export. C1403 Aluminium Cops 1 Pc. 1. Aluminium Tubes/Pipes 1.05 kg/kg content in the export product. 2. ABS Granules (Relevant Grade) 1.05 kg/kg content in the export product. 3. Nylon Granules (Relevant Grade) 1.05 kg/kg content in the export product. 4. CRCA Sheet 1.05 kg/kg content in the export product. C1404 Nut Shaft Assy. for Automobile 1 No. 1. SAE 8602 Bar/Round 1.20 kg/kg content in the export product. 2. CRCA Sheet 1.05 kg/kg content in the export product. 3. Steel Ball Net to net. C1405 Disc Horn 1 No. 1. Spring Steel Strip 1.05 kg/kg content in the export product. 2. Bakallite Strip 1.02 kg/kg content in the export product. 3. Spring (Lower contact finger) Net to net. 4. Support (Upper contact finger) Net to net. 5. Tungsten Contacts Net to net. 6. CRCA Sheet 1.10 kg/kg content in the export product. 7. Copper Wire 1.02 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 8. Nylon fabric laminated with PU2 0.29 sq.mtr. 9. Relevant embroidered labels: Woven labels/PVC Labels/Tags 3 Nos. Note: The inputs permitted for import shall be accounted for in the resultant product. H402 Mariners Mat made of Poly Ethylene (Monofilament) 1 kg 1. Polyethylene Monofilament rope, 3 strand, Z Twist, 9.5 mm dia 1.02 kg/kg content in the export product. H403 Polyester Staple Fibre/Polyester Tow/Polyester Tops 1 kg 1. PET Chips/Flakes 1.05 kg 2. Carbon Black 0.0184 kg 3. Spin Finish Oil 0.01 kg H404 Printed flexible packaging material of one layer or printed or unprinted adhesive laminated/extrusion laminated flexible packaging material of multilayers of relevant substrate with or without hotmel in the form of rolls/strips/sheets/labels/wrappers or in pouch form 1 Kg. 1. Relevant substrate(various types, thickness grades) of either one or in combination of more than one layer of any of the following items:- a)Polyethylene film b)Polyester film c)Metallised polyester film d)BOPP film e)Metallised BOPP film f)Cellophane film ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... A ____________________ = M Kg A + B + C + D + E + F (100+wastage%) Therefore entitlement of input A = M Kg X____________________________= ___Kg 100 ii) Net content of B in the export product shall be determined as follows: B _____________________ = P Kg A + B + C + D + E + F (100+wastage%) Therefore entitlement of input B = P Kg X ___________ ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 100 vi) Net content of F in the export product shall be determined as follows: F ____________________ = T Kg A + B + C + D + E + F (100+wastage%) Therefore entitlement of input F = T Kg X__________________________ = ___Kg 100 @ This represents total solid of the respective inputs at S.No. 2,3 4. NOTES 1. Exporter shall declare type of flexible packaging material i.e. adhesive laminated or extrusion laminated flexible material. In addition the exporter shall also declare composition of export product indicating no. of layers, thickness of each film/substrate in respect of the inputs as at Sr. No.1 to be used in the export product. 2. FLEXIBLE ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... of the addition of no. of layers. iv) The import of item at Sr.No.5 i.e. relevant hotmelt is allowed with wastage of 10% (ten) if the product is exported with hotmelt. 5. EXPORT PRODUCT IN POUCH FORM If the resultant product is in pouch form, additional wastage as mentioned below is to be allowed over and above the wastage allowed in case of single layer or two layer or multilayer flexible packaging material depending upon the specific type of pouch to be exported. POUCH TYPE WASTAGE 1. Centre Seal/sideseal 3 % (three) 2. Standups/standup with reclosable zipper 5 % (five) 3. Pouches with spouts 8 % (eight) For export of HDPE spout fixed pouches 1.05 Kg. of HDPE Granules is allowed for 1 Kg. of HDPE content in the export product. Exporter should also declare the specific type of pouch to be exported. 6. The total solid content taken on an average basis for liquid printing ink, liquid adhesive and liquid additive has been taken as 25% +/- 3%, 60% +/- 5% and 50% +/- 5% respectively. 7. Additional wastage of 5% (five) is allowed for conversion of LDPE Granules to LDPE films. However the additional wastage of5% ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... relevant GSM +/- 10% 1.02 kg Annexure "G" to Public Notice No.3 Dated 5.4.1999. (1) (2) (3) (4) (5) C1374 Machined cast components for switchgears resistance -welding parts, Heat Sinks, Diode bases manufactured out of high conductivity copper with other alloying elements like Chromium, Nickel, Beryllium, Cobalt and Silicon each not exceeding 5% conforming to BS 1400-HCC1/BS1400-CC1-TF/DIN-17655 GCU L50-DIN 17655 GCU CR F35/ASTMB 770-87a/ R40, R75, R76, R78, R80 of AFNOR specification meeting conductivity requirements of 40 to 90% IACS 1 kg 1. Cathode Copper and respective alloying element Chromium,Nickel, Cobalt, Beryllium and Silicon 1.20 kg/kg content in the export product. C1375 Machined Cast Bushings of Automotive and Non-Automotive applications, Pumps and Valve components like Casing, Impellers Discs,Plugs,Yoke Sleeves,Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of Gun Metal or Red Brass with copper and alloying elements Tin, Lead and Zinc vary-ying from 2 to 10% each, conforming to BS1400-LB2, LG2, LG4/DIN 1705-RG5,RG7/ ASTMB 584 or ASTMB ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... anganate) 2.50 kgs 10. Formic Acid 10 kgs 11. Acetic Acid 5 kgs 12. Chrome Tanning Agent: a)for full chrome finish 50 kgs b)for semi chrome finish OR 22 kgs Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for vege-table tanning 150 kgs 13. Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for retanning 20 kgs 14. Zirconium Tanning Salt 10 kgs 15. Sodium Formate/Acetate 8 kgs 16. Sodium Bicarbonate 8 kgs 17. Soda Ash 4 kgs 18. Magnesium Oxide 5 kgs 19. Syntan 54 kgs 20. Oxalic Acid 2.50 kgs 21. Sodium Dithionate (Hy-drose) 2.50 kgs 22. Fatliquours 24 kgs 23. Dye Levelling Agent 2 kgs 24. Dyes(Acid dyes/Direct dyes/Premetallised dyes/Basic Dyes/Reactive dyes/Sulphur dyes) 12 kgs (Out of the total quantity of 12 Kgs, the quantity of Reactive dyes shall not exceed 0.6 kg) 25. Dispersing Agent 5 kgs 26. Cationic Dye Fixative 5 kgs 27. Impregnating Resin 20 kgs 28. Penetrating Agent 4 kgs ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ide/Sodium Chlorite/Potassium Per-manganate) 1.5 kg 10. Formic Acid 10 kgs 11. Acetic Acid 2.5 kgs 12. Chrome Tanning Agent: a)for full chrome finish 30 kgs b)for semi chrome finish OR 13 kgs Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for vege-table tanning 55 kgs 13. Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for retanning 12 kgs 14. Zirconium Tanning Salt 5 kgs 15. Sodium Formate/Acetate 5 kgs 16. Sodium Bicarbonate 4 kgs 17. Soda Ash 2 kgs 18. Magnesium Oxide 2.5 kgs 19. Syntan 17 kgs 20. Borax 5 kgs 21. Oxalic Acid 2.50 kgs 22. Sodium Thio-sulphate 5 kgs 23. Sodium Dithionate (Hy-drose) 1 kgs 24. Fatliquours 20 kgs 25. Dye Levelling Agent 1 kgs 26. Dyes(Acid dyes/Direct Dyes/Premetallised dyes/Basic Dyes/Reactive dyes/Sulphur dyes) 10 kgs (Out of the total quantity of 10 kgs,the quantity of Reactive dyes shall not exceed 0.5 kg) 27. Dispersing Agent 2.5 kgs 28. Cationic ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
