Alloy Steel Rough Castings - Standards of Input Output Norms (SION) - C. Engineering Products

C350 Alloy Steel Rough Castings 1.00 MT 1 Major Raw Materials comprising of: a) Non Alloy Steel Melting Scrap 1275 kgs. b) Ferro Alloys comprising of: i) Charge Ferro Nickel/Nickel Oxide Sinter OR 60 kgs. Nickel 24 kgs 1 ii) Ferro Chrome iii) Ferro Manganese 20 kgs. iv) Ferro Molybdenum 25 kgs. v) Ferro Silicon 20 kgs. 2 Additives comprising of : 5 kgs a) Core Wire/Scrap/Ingot/Shots of Aluminium b) Core Wire/Lumps/Powder of Calcium Silicide(CaSi) c) Selenium d) Lumps/Powder of Misch Metal 3 Miscellaneous Items: a) i) Resin Coated Sand 360 kgs. ii) Organic Binders 160 kgs. b) i) Graphite Electrode 6 kgs. ii) Welding Electrode 10.00 kgs. iii) Mould Wash/ Mould Coat 25.00 kgs. iv) Grinding Wheel 5.00 kgs. v) Refractories: a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b) Direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/Castables d) Dolomite/Magnesia Carbon Bricks 30.00 kgs. vi) Industrial X-Ray Film (Various Grades for Gamma Rays Iridium 192 Cobalt 60) 9440 Sq. Cm. 4 Furnace Oil/Diesel Oil for: i) Ladle Heating ii) Mould Heating iii) Heat Treatment 212 Ltrs. Note: 1. The above norm is applicable only if the export products are manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15