Investment Casting of Non-Alloy Steel/Alloy Steel including Stainless Steel - Standards of Input Output Norms (SION) - C. Engineering Products

C376 Investment Casting of Non-Alloy Steel/Alloy Steel including Stainless Steel 1000 Kgs. 1 For Non-Alloy Steel Casting: a) Carbon Steel Scrap 1310 kgs. 2 For Alloy Steel except Stainless Steel Castings a) Alloy Steel Scrap 1310 kgs. b) Ferro Alloy for composition adjustment(Fe-cr,Fe-v,Fe-Mo,Fe-Ni etc.) 26 kgs. 3 For Stainless Steel Castings a) Stainless Steel Scrap 1310 kgs. b) Ferro-Alloy for composition adjustment(Fe-cr,Fe-v,Fe-Mo,Fe-Ni etc.) OR 26 kgs. 3 a) Electrolytic Pure Iron 1310 kgs. - Total ammount of Ferro Alloys b) Amount of each Ferro Alloy as per composition of Stainless Steel OR 1310 kgs X %age of Alloying elements in casting ------- %age of Alloying element in Ferro Alloy 3 a) Stainless Steel Scrap/Electrolytic Iron 1310 kgs. - Total ammount of Ferro Alloys b) Amount of each Ferro Alloy as per composition of Stainless Steel (in kgs.) 1310 kgs. Stainless Steel Scrap X %age of Alloying elements in casting ------- %age of Alloying element in Ferro Alloy 2 Additives: a) Ferro Manganese/Ferro Silicon/Aluminium 30 kgs. 3 a) Waxes (Paraffin Wax/Micro Crystalline Wax) 63 kgs. b) Resin (Resin Derivatives, Tree Derivatives, Hydrocarbon resin from Petroleum) 50 kgs. c) Plastics (Polyethylene, Ethyl Cellulose, Nylon, Ethylene-Vinyl-Acetate, Ethylene-Vinyl-Acrylate) 13 kgs. d) Filler and other additives (Polystrene, Discarboximide, Methylene Tetramine, Isophathalic Acid) 31.4 kgs. 4 Material for Ceramic Shell Mould: a) Colloidal Silica/Ethyl Silicate/Hybrid Binder 66 kgs. b) Zircon/Zircon Powder/ Sand/Silica Glass/Alumina/Aluminium Silicate 1034 kgs. c) Wetting agent(Sodium Alkyl Aryl Sulphonate, Sodium Alkyl Sulphate) 31 Ltrs. d) Anti Foam (Aqueous-Silicone-Emulsion, Liquid Fatty Alcohol) 21 Ltrs.