Hot Rolled (Pickled/unpickled) Non Alloy/Alloy/Stainless Steel Plates/Sheets/ Strips/Wide Coils - Standards of Input Output Norms (SION) - C. Engineering Products

C495 Hot Rolled Non-alloy/ Alloy / Stainless Steel Sheets/ Strips/ Wide Coils 1 Tonne 1 Slabs of relevant grade of Non-alloy/ Alloy/ Stainless Steel Or 1030 kgs 1 Ingots of relevant grade of Non-alloy/ Alloy/ Stainless Steel 1050 kgs 2 CI/ Steel Rolls for Hot Rolling Mill 0.60 Kg. (if input is slab) 1.20 Kg. (if input is ingot) 3 Steel Shots 5.5 kg 4 Relevant Shear Blades/Saw Blades 0.01 kg 5 Relevant Fuel (for fuel fired re-heating furnace ) 2,61,000 K.Cal 6 Relevant fuel for electric power for hot rolling mill auxiliaries (for units with captive power plant /source only) 2,17,500 K.Cal Note 1 : The quantity of fuel for power generation (i.e 2,17,500K.Cal.) which is based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2 : The quantity of fuels (in K.Cal.) allowed in the SION correspond to a fuel having unit heat value of 8700 K.Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./K.Ltr.) may be worked out by dividing the K.Cal. figures given in the SION by the actual unit heat value of the imported fuel.