| Standards of Input Output Norms (SION) |
Home  Schedules Standards of Input Output Norms (SION) This |
|
|
C. Engineering Products - Standards of Input Output Norms (SION)
|
|
Showing 501 to 1000 of 2056 Records |
| |
|
| C0501 |
|
Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
|
|
| C0502 |
|
Magnesite Chrome/Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars
|
|
| C0503 |
|
Magnesium Ferro Silicon
|
|
| C0504 |
|
Non Alloy/ Alloy Steel Coated/ Plated Wires
|
|
| C0505 |
|
Hot Rolled Galvanized Non alloy steel Sheet/hoops & Strips/Wide Coils
|
|
| C0506 |
|
Non alloy steel Galvanised wire
|
|
| C0507 |
|
Non alloy steel Galvanised Wires (From melting scrap)
|
|
| C0508 |
|
Hot Rolled Non Alloy Steel Plates/Sheets /hoops & Strips. (including skelp)/ wide Coils through DC arc Furnace Route (for open Cycle Operation)
|
|
| C0509 |
|
Non alloy Steel Plates
|
|
| C0510 |
|
Non Alloy/ Alloy Steel (Excluding Stainless Steel) Wires (Uncoated)
|
|
| C0511 |
|
Non alloy/ Alloy/ stainless steel Bars and Rods (including Rounds, flats, Hexagon, octoagon, wire rod, cold twisted deformed bars, thermo-mechanically treated reinforcing Bars etc.) Angles, Shapes and Sections (including Beams, Joists,Channels Special Profiles etc. ) Plates/ sheets/ strips/ wide coils/ Blooms/ Billets/ Slabs and Ingots
|
|
| C0512 |
|
Non Alloy/Alloy/ Stainless Steel Bars & Rods (including Rounds, Flats, Hex- agons, Octagons, Wire rods, Cold twisted deformed bars, thermo mechnically treated reinforcing Bars) Angles, Shapes and Sections (including beams, Joists, Channels, special profiles), Plates Sheets/Strips/wide Coils, Blooms,
|
|
| C0513 |
|
Non-alloy Steel bars & rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted Bars, thermo mechanically treated reinforcing bars), Angles, Shapes & Sections (including beams, joist, channels, special profiles etc.) and Rails
|
|
| C0514 |
|
Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed bars, Thermomechanically treated reinforcing Bars etc.,) Angles, Shapes & Sections (including Beam, Joists, Channels, Special Profiles etc.) Plates/Sheets/ Strips/ Wide Coils, Blooms/Billets/ S
|
|
| C0515 |
|
Non-alloy steel wire (uncoated)
|
|
| C0516 |
|
Non-Alloy steel wire uncoated (from melting scrap)
|
|
| C0517 |
|
Non-Alloy/ Alloy steel, Ingots, Blooms, Billets, Slabs, Bars and rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold Twisted Deformed Bars, Thermo Mechanically Treated Reinforcing Bars), Angles, Shapes and Sections (including Beams, Joists, Channels, Special profiles)
|
|
| C0518 |
|
Refractories Viz. Magnesite bricks
|
|
| C0519 |
|
Silica Bricks/ Shapes for Blast Furnace
|
|
| C0520 |
|
Silica Bricks/ Shapes for Coke Oven
|
|
| C0521 |
|
Silica Mortar
|
|
| C0522 |
|
Silico Manganese (Si Mn)
|
|
| C0523 |
|
Stainless Steel Wires (from melting scrap)
|
|
| C0524 |
|
Stainless Steel Bars & Rods (including rounds, flats, wire rods etc.) Angles, Shapes & Sections (including special profiles.)
|
|
| C0525 |
|
Stainless Steel Bars and rods (including Rounds, Flats Hexagons, Octagons, Wire rods, etc.), Angles, Shapes and Sections (including beams, joists, Channels, special profiles, etc.), Plates/ Sheets/Strips/wide Coils/ Blooms/ Billets, Slabs/Ingots, in any condition/ finish whether cast, Hot Rolled/Col
|
|
| C0526 |
|
Cold Rolled Stainless Steel Plates/Sheets/hoops & Strips/ Wide Coils/Circles
|
|
| C0527 |
|
Stainless Steel Wires/Ribbon
|
|
| C0528 |
|
Steel Earthing Wire (Gavanized)
|
|
| C0529 |
|
Deleted
|
|
| C0530 |
|
1"Flexible Tubing
|
|
| C0531 |
|
1/2" Flexible Tubings
|
|
| C0532 |
|
1/2" to 3" Galvanised Flexible Conduits
|
|
| C0533 |
|
2" Bungs with or without Washer/Gasket
|
|
| C0534 |
|
2" Flanges with or without Washer/Gasket
|
|
| C0535 |
|
2 Galvanised flanges with rubber gaskets
|
|
| C0536 |
|
2 Galvanised/ Zinc Coated Bungs
|
|
| C0537 |
|
2 Galvanised/Zinc coated Flange
|
|
| C0538 |
|
2 Galvanised Bungs with rubber Gasket
|
|
| C0539 |
|
3/4 Bungs with or without Washer/Gasket
|
|
| C0540 |
|
3/4 Flanges with or without Washer/Gasket
|
|
| C0541 |
|
3/4 Flexible Tubings
|
|
| C0542 |
|
3/4" Galvanised bungs with rubber gaskets
|
|
| C0543 |
|
3/4 Galvanised flanges with rubber gaskets
|
|
| C0544 |
|
3/4 Galvanised Zinc coated Bungs
|
|
| C0545 |
|
3/4 Galvanised/ Zinc coated Flanges
|
|
| C0546 |
|
Adjustable Bracket (Galvanised)
|
|
| C0547 |
|
Wood to steel adapter, all types
|
|
| C0548 |
|
Airconditioner (All Types excluding Split Air Conditioner)
|
|
| C0549 |
|
Anchor Bolt with Nut
|
|
| C0550 |
|
Animal Drawn Ploughs/ Parts Thereof
|
|
| C0551 |
|
Arm Blade (Galvanised)
|
|
| C0552 |
|
Aruvil Double Wheel Carrier kit Set (Galvanised)
|
|
| C0553 |
|
Automatic Thimble
|
|
| C0554 |
|
Axes made of Steel
|
|
| C0555 |
|
Deleted
|
|
| C0556 |
|
Deleted
|
|
| C0557 |
|
Deleted
|
|
| C0558 |
|
Ball Chain Cap (Galvanised)
|
|
| C0559 |
|
Ball Pen Steel Refills
|
|
| C0560 |
|
Barb Arm (Galvanised)
|
|
| C0561 |
|
Barb Arm Base
|
|
| C0562 |
|
Bearing Races (Turned Inner and Outer)
|
|
| C0563 |
|
Bell Metal utensils
|
|
| C0564 |
|
Bimetallic Type Spark Plug
|
|
| C0565 |
|
Deleted
|
|
| C0566 |
|
Galvanised Welded steel Pipes/ Tubes
|
|
| C0567 |
|
Bolt Axle (Galvanised) made of Steel
|
|
| C0568 |
|
Bolts & Nuts made of CHQ Steel
|
|
| C0569 |
|
Bolts (Galvanisded)
|
|
| C0570 |
|
Bolts/screws made of steel
|
|
| C0571 |
|
Bolts/screws made of steel Electroplated
|
|
| C0572 |
|
Bolts/screws made of steel galvanised
|
|
| C0573 |
|
Bottom, Top Cover of Round Battery Jacket made of Tin plate
|
|
| C0574 |
|
Boulevard Clamp (Galvanised)
|
|
| C0575 |
|
Box Girders for Bridges (Galvanised)
|
|
| C0576 |
|
Box Hinge (Galvanised)
|
|
| C0577 |
|
Brace Band (Galvanised)
|
|
| C0578 |
|
Brace Rail End (Galvanised)
|
|
| C0579 |
|
Brace Rail End (Galvanised)
|
|
| C0580 |
|
Brass Builder Hardware
|
|
| C0581 |
|
Brass caps for dry cells batteries
|
|
| C0582 |
|
Brass Cup or Cup, Bullet, Jacket of Copper Alloy for Defence application
|
|
| C0583 |
|
Brass Tubes
|
|
| C0584 |
|
Brass valves
|
|
| C0585 |
|
Bronze utensils
|
|
| C0586 |
|
Bull Dog Hinge
|
|
| C0587 |
|
Bushing Reverse Ball Valve made of Aluminium Alloy ( Grade AA 2011T3) ( Motor Vehicle Part)
|
|
| C0588 |
|
Bushing Third Ball Valve made of Aluminium Alloy (Grade AA 2011T3) (Motor Vehicle Part)
|
|
| C0589 |
|
Epoxy Polyester Powder coated Cabinet made of CRCA Non-Alloy Steel Sheets OR Cabinets made of CRCA Non-Alloy Steel Sheets other than Epoxy Polyester Powder Coated
|
|
| C0590 |
|
Cable Ties made of Stainless Steel
|
|
| C0591 |
|
Cantilever Gate Roller (Galvanised)
|
|
| C0592 |
|
Capseal made out of Tin Plate Waste/Waste or Tin Free Steel
|
|
| C0593 |
|
Non Alloy/Alloy Steel submerged arc Welded Pipes as per API Grades/ASTM Grade or equivalent OR Hot Formed Steel Bends as per API, ASTM Grade or equivalent grade Degree : 0-180 Degree
|
|
| C0594 |
|
Carbon/ Alloy Steel Seamless Tubes (Cold Finished)
|
|
| C0595 |
|
Ceramic Coated Steel Pipes With or Without couplings
|
|
| C0596 |
|
Cl Cistern
|
|
| C0597 |
|
Cl Pipes and Fittings
|
|
| C0598 |
|
CLEVIS
|
|
| C0599 |
|
Clips for Railways - Elastic Rail clips, pendrol clips, E. Clips and G-Clips
|
|
| C0600 |
|
Coil Spring
|
|
| C0601 |
|
Cold Rolled Steel Tubes for Furniture
|
|
| C0602 |
|
Cold Rolled Precision Steel Tubes
|
|
| C0603 |
|
Machined/ Cold Rolled/Cold Formed rings for bearing races, CV cages
|
|
| C0604 |
|
Collar
|
|
| C0605 |
|
Components of Electric Teeth Plaque removing Brush: Drive Gear
|
|
| C0606 |
|
Components of Electric Teeth Plaque removing Brush: Satelite Gear
|
|
| C0607 |
|
Components of Electric Teeth Plaque removing Brush: Rack
|
|
| C0608 |
|
Components of Electric Teeth Plaque removing Brush: Rack Pin/Pin (Big & small)
|
|
| C0609 |
|
Components of Electronic Home plaque removing instruments: Drive Gear
|
|
| C0610 |
|
Components of Steel Drum namely Body Sheets/ Circles made of CRCA
|
|
| C0611 |
|
Copper Bottom Stainless Steel Kitchenwares
|
|
| C0612 |
|
Copper utensils
|
|
| C0613 |
|
Corner Arm (Galvanised)
|
|
| C0614 |
|
Crank Drive of Cryogenic Pumps
|
|
| C0615 |
|
CRCA Butt Hinges
|
|
| C0616 |
|
CRCA Ghamellas with/without handle made of CRCA Sheet/M.S. Wire Rod
|
|
| C0617 |
|
CRCA Hinges Electric Brass plated
|
|
| C0618 |
|
CRCA Hinges self colour
|
|
| C0619 |
|
CRCA Hinges Zinc plated
|
|
| C0620 |
|
Crow Bar / Wrecking Bar
|
|
| C0621 |
|
Crowns made of Tin free steel/ Tin Plate Prime with dry blend lining Printed
|
|
| C0622 |
|
Cultivator
|
|
| C0623 |
|
Cupboard made of CRCA Sheets
|
|
| C0624 |
|
Cut Hand tacks made of M.S. Sheets
|
|
| C0625 |
|
Decorative Handicrafts/Artwares made of Anodised Aluminium
|
|
| C0626 |
|
Dimmer Stat continuously variable voltage auto transformer (copper wound) - Portable types
|
|
| C0627 |
|
Dissolved Acetylene Gas Cylinder
|
|
| C0628 |
|
Divider Valves (Metering Device)
|
|
| C0629 |
|
Domestic utensils (Brass)
|
|
| C0630 |
|
Door/ Window/ ventilator Sections
|
|
| C0631 |
|
Double Carrier Wheel
|
|
| C0632 |
|
Dowel Pin made out of CHQ Alloy steel/ Stainless Steel
|
|
| C0633 |
|
Drag Link Chain
|
|
| C0634 |
|
Drive Rod made of Stainless Steel (Part of Dental Instrument)
|
|
| C0635 |
|
Ductile Iron Spun Pipes
|
|
| C0636 |
|
Electrolytic Tinplate Components
|
|
| C0637 |
|
Electronic Medical/Dental Instruments and Parts thereof: Motor Pinion ASI-416
|
|
| C0638 |
|
Element of Fuel Injection Equipment
|
|
| C0639 |
|
Round/Eliptical /Oval Tin Plate container and/ or components thereof
|
|
| C0640 |
|
End Clamp
|
|
| C0641 |
|
Fabricated Steel Hardware/ Structure/Articles not elsewhere specified made out of Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips
|
|
| C0642 |
|
Female Hinge
|
|
| C0643 |
|
Fitting made out of Non- Alloy Steel (Galvanised)
|
|
| C0644 |
|
Flange Plate
|
|
| C0645 |
|
Flexible Channel/Drop Channel/Rigid Channel
|
|
| C0646 |
|
Flexible Corrugated Stainless Steel Hose with Braidings of Stainless Steel Wire
|
|
| C0647 |
|
Floor Flange
|
|
| C0648 |
|
Floor Strainer/ Insect Stopper made of Stainless Steel
|
|
| C0649 |
|
Folding/straight Umbrella (Auto and/or Manual)
|
|
| C0650 |
|
Forged Eye Hoe (other than these covered by Sl No. 243 & 498)
|
|
| C0651 |
|
Fork
|
|
| C0652 |
|
Fork Digging with socket
|
|
| C0653 |
|
Fountain Pen Nibs
|
|
| C0654 |
|
Fully Threaded Rod (Galvanised)
|
|
| C0655 |
|
Galvanized Curb Stake
|
|
| C0656 |
|
Gate Clip
|
|
| C0657 |
|
Gate Hold Back
|
|
| C0658 |
|
Gate Latch
|
|
| C0659 |
|
German Silver Art-ware
|
|
| C0660 |
|
German silver utensils
|
|
| C0661 |
|
Gun metal valves
|
|
| C0662 |
|
Half Metal Ball Pen
|
|
| C0663 |
|
Hand Sewing needles
|
|
| C0664 |
|
Hardened Twin Thread Bright Zinc plated clear Passivated Steel screws
|
|
| C0665 |
|
Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator)
|
|
| C0666 |
|
Heavy duty Fork latch
|
|
| C0667 |
|
Galvanised Non alloy/ Alloy Steel Wire Ropes (fibre core)
|
|
| C0668 |
|
Non alloy/ Alloy Steel Wire Ropes (fibre core) (Un-Galvanised)
|
|
| C0669 |
|
Non alloy/ Alloy Steel Wire Ropes (Steel Wire Core)
|
|
| C0670 |
|
Galvanised Non alloy/ Alloy Steel Wire Ropes (Steel wire core)
|
|
| C0671 |
|
High Chromium Grinding media Balls for Cement Grinding Mills (Composition: Cr.-16-17%, Mo-0.6-0.7%, Si-0.6-0.7%, C-1.5-2.5%, Fe-Balance)
|
|
| C0672 |
|
High pressure Seamless Gas Cylinders
|
|
| C0673 |
|
Hinges and parts thereof made of M.S. or Stainless Steel
|
|
| C0674 |
|
Hoe Welded Eye a).Hoe Blade b).Eye
|
|
| C0675 |
|
Hose Assemblies with End Metal Fittings
|
|
| C0676 |
|
Hot Dipped Galvanised Tension Bar/ Gate Rods/ Truss Rods/ Drop Rods
|
|
| C0677 |
|
Deleted
|
|
| C0678 |
|
Hurricane Lantern made of Tin plate
|
|
| C0679 |
|
Hypodermic Needles (Disposable or Reusable)
|
|
| C0680 |
|
ILD Fork
|
|
| C0681 |
|
ILD Guide
|
|
| C0682 |
|
Deleted
|
|
| C0683 |
|
Indust. Offset Bracket
|
|
| C0684 |
|
Industrial Locking Device
|
|
| C0685 |
|
Industrial Offset Hinge (Galvanised)
|
|
| C0686 |
|
Industrial Roller Chain(Above 1-1/4
|
|
| C0687 |
|
Industrial Roller Chain(Above 3/4
|
|
| C0688 |
|
Industrial Roller/Motor Cycle/Automotive Timing chain including spares (Upto 3/4
|
|
| C0689 |
|
Industrial Valve (Casr or Forged Body)
|
|
| C0690 |
|
Cryogenic Tank for Liquified Gases
|
|
| C0691 |
|
Integrated Watch Cases with/without Chain
|
|
| C0692 |
|
Items manufactured out of GP Sheets
|
|
| C0693 |
|
Items manufactured out of tin plate
|
|
| C0694 |
|
J-Bracket
|
|
| C0695 |
|
Jotter Ball Point Pen
|
|
| C0696 |
|
Jotter refills
|
|
| C0697 |
|
Knitting Needles/ Pins-Double ended made out of Aluminium
|
|
| C0698 |
|
Knitting Needles/ Pins-knobbed made out of Aluminium
|
|
| C0699 |
|
Knitting Needles/ Pins-knobbed Plastic
|
|
| C0700 |
|
Lever Latch for Locking Ring
|
|
| C0701 |
|
Locks and valves water pipe filling
|
|
| C0702 |
|
Loop cap
|
|
| C0703 |
|
Loop Cap
|
|
| C0704 |
|
LPG Cylinders with/or without valves
|
|
| C0705 |
|
M.S. Fish Plate
|
|
| C0706 |
|
M.S. Tubular Folding Furniture with Plastic Fittings
|
|
| C0707 |
|
M.S. Washer Galvanised/painted
|
|
| C0708 |
|
Male Bracket
|
|
| C0709 |
|
Male Hinge/ Male Bracket
|
|
| C0710 |
|
Male Lag Bracket
|
|
| C0711 |
|
Malleable Box Hinge
|
|
| C0712 |
|
Manually Operated 35mm Camera with Built in Flash
|
|
| C0713 |
|
Marine freight containers of type ICC 20'x8'x8.5'
|
|
| C0714 |
|
Mechanical Watch Movement Automatic Day & Date
|
|
| C0715 |
|
Metal Casing Vaccum Flasks (Made from Tin Plates)
|
|
| C0716 |
|
Metal Clips for Pens
|
|
| C0717 |
|
Metal Fountain Pens
|
|
| C0718 |
|
Mathematical Instrument Box with/without PVC Trey
|
|
| C0719 |
|
Mild Steel Hollow Rivets
|
|
| C0720 |
|
Mild Steel Rivets
|
|
| C0721 |
|
MS Aldrop-Nickel Plated
|
|
| C0722 |
|
M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated
|
|
| C0723 |
|
MS Colour coated Ghamala(made of HR Sheet)
|
|
| C0724 |
|
MS Drum
|
|
| C0725 |
|
MS Paper pin & Clip
|
|
| C0726 |
|
MS Washer
|
|
| C0727 |
|
MS Window, Door Ventilor, Grate/ Grills Fabricated Frames and Component Parts thereof
|
|
| C0728 |
|
Needle Roller Bearing 25 mm to below 50 mm I.D
|
|
| C0729 |
|
Needle Roller Bearing Type BK/ HK/SCE/SCH below 25 mm I.D.
|
|
| C0730 |
|
Needle Roller Bearing Type BK/ HK/SCE/SCH/MNJ 25 mm I.D.
|
|
| C0731 |
|
Needle Roller Bearing Type BU/ HN/BN/HV below 25 mm I.D.
|
|
| C0732 |
|
Needle Roller Bearings type - KZK upto 30 mm OD
|
|
| C0733 |
|
Needle Roller Bearings Type -K/KBK upto 20 mm OD.
|
|
| C0734 |
|
(a) Needle Rollers upto 4 mm Dia (b) Needle Rollers above 4 mm to 8mm Dia (c) Needle Rollers above 8 mm Dia
|
|
| C0735 |
|
Needle Screws Self colour or Plated
|
|
| C0736 |
|
Nickel Plated M S Buckles
|
|
| C0737 |
|
Non Alloy Steel / Stainless Steel Wire Nails
|
|
| C0738 |
|
Nuts/Bolts/ Screws made of Stainless Steel of variety-x
|
|
| C0739 |
|
Nyloc Self Locking Nuts, Steel Locking Nuts and Wheel Nuts made from EN/ AISI/ DIN/ JIS Series Steel excluding Stainless Steel
|
|
| C0740 |
|
Offset Rail End
|
|
| C0741 |
|
OTS cans for packing 50 - 500 gms of instant Coffee
|
|
| C0742 |
|
OTS Cans/ dingeley cans (Seam Welded).
|
|
| C0743 |
|
Oxygen Cylinder dia 140 MM
|
|
| C0744 |
|
Oxygen Cylinder dia 229 MM
|
|
| C0745 |
|
Paddy Thrasher
|
|
| C0746 |
|
Panel Clamp
|
|
| C0747 |
|
Panels made of CRCA Sheets
|
|
| C0748 |
|
Paper Punch
|
|
| C0749 |
|
Pen Barrels
|
|
| C0750 |
|
Pen Caps
|
|
| C0751 |
|
Perforated Construction Stakes (Round/Flat/ Square)
|
|
| C0752 |
|
Photo frame made of Brass
|
|
| C0753 |
|
Photo-Engraving Zinc Sheets
|
|
| C0754 |
|
Pilfer Proof Caps-Plain/Printed with E.P. Liners
|
|
| C0755 |
|
Deleted
|
|
| C0756 |
|
Deleted
|
|
| C0757 |
|
Deleted
|
|
| C0758 |
|
Deleted
|
|
| C0759 |
|
Deleted
|
|
| C0760 |
|
Deleted
|
|
| C0761 |
|
Deleted
|
|
| C0762 |
|
Deleted
|
|
| C0763 |
|
Deleted
|
|
| C0764 |
|
Deleted
|
|
| C0765 |
|
Deleted
|
|
| C0766 |
|
Deleted
|
|
| C0767 |
|
Pole Line Hardware Fittings & Accessories (Galvanised)
|
|
| C0768 |
|
Post Cap
|
|
| C0769 |
|
Post Cap
|
|
| C0770 |
|
Presensitised Positive Offset Aluminium plates
|
|
| C0771 |
|
Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass
|
|
| C0772 |
|
Primary/ Secondary Blades of Shaving system cartridges (for Twin Blade)
|
|
| C0773 |
|
Printed Lug Cap with Internal Coating Lined with PVC compound
|
|
| C0774 |
|
PVC Co-extruded Galvanised Non- Alloy Steel Wire
|
|
| C0775 |
|
Racks made of CRCA Sheets
|
|
| C0776 |
|
Rail End
|
|
| C0777 |
|
Rakes/Garden Rakes/ Fork Manure Hooked
|
|
| C0778 |
|
Rectangular tops fitted with screw neck & handle and bottoms
|
|
| C0779 |
|
Rectangular/ Square Tin Plate container and/ or components thereof
|
|
| C0780 |
|
Rectangular/Square Tin Plate container and/or component thereof with round neck
|
|
| C0781 |
|
Rings, Lid and Tagger Assemblies with or without Tagger (with or without matching Bottom Piece) made of Tin Plate
|
|
| C0782 |
|
Round Tin Containers (other than OTS cans) and parts thereof
|
|
| C0783 |
|
Round tops/ ends (bottoms) of containers made of Tin Plate
|
|
| C0784 |
|
Rounda File System
|
|
| C0785 |
|
Rubber Wheel
|
|
| C0786 |
|
Saddle Clamp
|
|
| C0787 |
|
Sanitary and bathroom fittings made out of Brass/aluminium
|
|
| C0788 |
|
Sanitary and bathroom fittings (of gun metal)
|
|
| C0789 |
|
Sanitary and Bathroom Fittings made of Brass (Nickel/Chrome Plated)
|
|
| C0790 |
|
Scrool
|
|
| C0791 |
|
Seamless Stainless Steel Tubes (Cold Finished)
|
|
| C0792 |
|
Seamless Stainless Steel Tubes (Cold Finished) (Stainless steel grade-304/304L/321)
|
|
| C0793 |
|
Seamless Stainless Steel Tubes (Cold Finished) (Stainless steel grade-316/316L/316 TI)
|
|
| C0794 |
|
Seamless Stainless Steel Tubes/ Pipes (Hot Finished)
|
|
| C0795 |
|
Seamless Stainless Steel Tubes (Hot Finished) (Stainless steel grade -304/304L/321)
|
|
| C0796 |
|
Seamless Stainless Steel Tubes (Hot Finished) (Stainless steel grade -316/316L/316TI)
|
|
| C0797 |
|
Seamless Steel Pipes and Tubes (other than Stainless Steel) Hot Finished
|
|
| C0798 |
|
Seamless/Butt Welded Steel Pipe Fittings made from Seamless/ ERW Steel Tubes
|
|
| C0799 |
|
Self Tapping Screw
|
|
| C0800 |
|
Sewing Machine Needles
|
|
| C0801 |
|
Shaft "A" (Part of Computer Printer)
|
|
| C0802 |
|
Shoe tacks made of CRCA
|
|
| C0803 |
|
Shoulder Bolt made out of CHQ Alloy Steel/ Stainless Steel
|
|
| C0804 |
|
Deleted
|
|
| C0805 |
|
Shuttering Clamps/ Column Clamps
|
|
| C0806 |
|
Folding Bed made of Mild Steel
|
|
| C0807 |
|
Sintered Alloy Iron Bushes & Parts
|
|
| C0808 |
|
Sleeve
|
|
| C0809 |
|
Sleeve Bracket
|
|
| C0810 |
|
Snap Fastners consisting of Stud & Socket
|
|
| C0811 |
|
Snap Off Blade Cutter of different size
|
|
| C0812 |
|
Soft Box (for use with Electronic Studio Flash Lights)
|
|
| C0813 |
|
Spade/Shovels
|
|
| C0814 |
|
Split Air Conditioner capacity (1.5 Ton & above)
|
|
| C0815 |
|
Spot Grid
|
|
| C0816 |
|
Stainless Steel Cannulaes made out of Stainless Steel Tubes/Wires
|
|
| C0817 |
|
Stainless Steel Casserole with copper bottom of different sizes
|
|
| C0818 |
|
Stainless Steel Collar for electric lamps
|
|
| C0819 |
|
Stainless Steel Cutlery with or without handle irrespective of what material the handle may have been ma de of
|
|
| C0820 |
|
S.S. Fabricated/Welded Pipes/Tubes
|
|
| C0821 |
|
Stainless Steel Fabricated Tower Packing
|
|
| C0822 |
|
Stainless steel FJ-500 Food Jar with Polypropylene cup & stopper
|
|
| C0823 |
|
Stainless Steel Frypan with copper bottom of different sizes
|
|
| C0824 |
|
Stainless Steel Hospital Wares (Other than those covered by Sl.No 825 )
|
|
| C0825 |
|
Stainless Steel Hospital Wares (Rectangular/Square with straight edges)
|
|
| C0826 |
|
Stainless Steel Kitchen Sinks
|
|
| C0827 |
|
Stainless Steel Knives of various sizes
|
|
| C0828 |
|
Stainless Steel Pressure Cooker with Copper Bottom/ Capsuled Bottom (Sandwich Bottom) of different sizes
|
|
| C0829 |
|
Stainless Steel safety razor Blades
|
|
| C0830 |
|
Stainless Steel Saucepan with copper bottom of different sizes
|
|
| C0831 |
|
Stainless Steel Seamless Tubes/Pipes (Cold Finish)
|
|
| C0832 |
|
Table, Kitchen & other household articles made of Stainless Steel with or without handle/ Iid/ antiskid gasket irrespective of what material the handle/Iid/ antiskid gasket may have been made of (other than those covered under the SION C-833)
|
|
| C0833 |
|
Table, Kitchen & other household articles made of Stainless Steel with or without handle/ Iid/ antiskid gasket irrespective of what material the handle /Iid antiskid gasket may have been made of (rectangular/ square with straight edges)
|
|
| C0834 |
|
Stainless Steel Vacuum Flask
|
|
| C0835 |
|
Stainless Steel Watch Straps
|
|
| C0836 |
|
Stainless Steel Water Filter of various capacities with/without candles
|
|
| C0837 |
|
(a) Stainless Steel Welded and Cold Drawn Tubes and Pipes (b) Stainless steel welded Corrugated Hose Pipes
|
|
| C0838 |
|
Deleted
|
|
| C0839 |
|
Stainless steel wire rope (from wire rod)
|
|
| C0840 |
|
Stapler
|
|
| C0841 |
|
Deleted
|
|
| C0842 |
|
Steel Clamp (Galvanised)
|
|
| C0843 |
|
Steel Clamp (Ungalvanised)
|
|
| C0844 |
|
Steel/ Cops/ Pirn/ Bobbin
|
|
| C0845 |
|
Steel Fire Resisting Filing cabinets fitted with combination locks (consisting of locks, Dail and Dial Rings)
|
|
| C0846 |
|
Steel flexible Tubes/ Pipes in sizes ranging from 1/2
|
|
| C0847 |
|
Steel folding Bed Nickel plated/ Painted
|
|
| C0848 |
|
Steel Gate Corner - Galvanised
|
|
| C0849 |
|
Steel Hinges - Bar Type
|
|
| C0850 |
|
Steel J. Belt - Galvanised
|
|
| C0851 |
|
Steel pegs
|
|
| C0852 |
|
Steel Safes fitted with combination locks (consisting of Locks, Dail and Dial Ring)
|
|
| C0853 |
|
Steel Screw
|
|
| C0854 |
|
Steel Truss Tightner - Galvanised
|
|
| C0855 |
|
Steel Weld mesh
|
|
| C0856 |
|
Steel Stranded wire
|
|
| C0857 |
|
Surgical Blades made of High Carbon Steel (Carbon 0.6% and above by wieght)
|
|
| C0858 |
|
Surgical Blades made of Stainless Steel
|
|
| C0859 |
|
Suture Needles
|
|
| C0860 |
|
Table Pencil Sharpener
|
|
| C0861 |
|
TEE Hinges (Painted/Zinc Plated)
|
|
| C0862 |
|
Tension Band
|
|
| C0863 |
|
Tiller Left Hand or Right Hand
|
|
| C0864 |
|
Ball Pen Tips of Brass
|
|
| C0865 |
|
Deleted
|
|
| C0866 |
|
Tower Bolts
|
|
| C0867 |
|
Tower Crane Type E1/13B
|
|
| C0868 |
|
Tower Crane Type F25/26C similar to FO/23B
|
|
| C0869 |
|
Track Wheel
|
|
| C0870 |
|
Transducer
|
|
| C0871 |
|
Tubular Poles/ Accessories i.e. Cross Arms, Tussing Tackle, Stay Set, Flag Arm, Anchor Bolt, Holder, Arrestors
|
|
| C0872 |
|
Turn Buckle
|
|
| C0873 |
|
Single/Twin type shaving system Disposable Razor Blades (single/double/triple blades)with/without Lubra exported either with fixed handle or handle and magazine separately in different types of packings
|
|
| C0874 |
|
Deleted
|
|
| C0875 |
|
Deleted
|
|
| C0876 |
|
Deleted
|
|
| C0877 |
|
Deleted
|
|
| C0878 |
|
Deleted
|
|
| C0879 |
|
Deleted
|
|
| C0880 |
|
Twin type shaving system Razor/ Razor Handle
|
|
| C0881 |
|
Type Inner/ Outer Ring Spiral Wound Gaskets
|
|
| C0882 |
|
U-Bolt
|
|
| C0883 |
|
U-Clamp/C-Clamp
|
|
| C0884 |
|
Universal Bracket
|
|
| C0885 |
|
Vaccum Flasks of Stainless Steel Casing
|
|
| C0886 |
|
Valve for LPG Cylinder, Hand wheel type, made of Brass
|
|
| C0887 |
|
Vertical Arm
|
|
| C0888 |
|
Stainless Steel Washers of different grades
|
|
| C0889 |
|
Deleted
|
|
| C0890 |
|
Watch Dials made out of Nickel Silver Brass Strip
|
|
| C0891 |
|
Water meters
|
|
| C0892 |
|
Wear Sleeves made out of Bright Mild Sheet
|
|
| C0893 |
|
Welded Steel Pipe Fittings made from Steel Plates/Sheets
|
|
| C0894 |
|
Deleted
|
|
| C0895 |
|
Window Stay (made of Steel Sheet)
|
|
| C0896 |
|
Steel Wire Nails
|
|
| C0897 |
|
Wood screws made of steel, self colour or plated
|
|
| C0898 |
|
Wood to steel Adapter
|
|
| C0899 |
|
Y-Arm made of Steel
|
|
| C0900 |
|
Zinc Plated (Galvanised) Beam Clam 3/8
|
|
| C0901 |
|
Zinc plated (Galvanised) conduit Hanger
|
|
| C0902 |
|
Zinc Plated (Galvanised) Metallic Connectors (Regular
|
|
| C0903 |
|
Zinc Plated (Galvanised) Romex Connectors 1/2
|
|
| C0904 |
|
Zinc Plated (Galvanised Steel Locknuts (Blanked/ Punched) Size:
a)1/2" to 4" Regular 1/2" to 2" UL/CSA
b)5" and 6" Regular and 2-1/2" to 6" UL/CSA
c)1/2" to 1" Extruded type
|
|
| C0905 |
|
Aluminium Oxide Resin Disc (Coated Abrasive): 4
|
|
| C0906 |
|
Aluminium Oxide Resin Disc (Coated Abrasive) 5
|
|
| C0907 |
|
Oxide Resin Disc (Coated Abrasive Aluminium) 6
|
|
| C0908 |
|
Oxide Resin Disc (Coated Abrasive Aluminium) 7
|
|
| C0909 |
|
Ball/ Roller Thrust/ clutch release/ spherical plain Bearing having height more than 1
|
|
| C0910 |
|
Ball/ Roller Thrust/ clutch release/ spherical plain Bearing having height more than 2
|
|
| C0911 |
|
Ball/Roller Thrust/ clutch release/ spherical plain Bearing having height 0-1
|
|
| C0912 |
|
Bench Grinder 6
|
|
| C0913 |
|
Brazed Carbide Tools
|
|
| C0914 |
|
Brazed Tools Carbide Tips
|
|
| C0915 |
|
Cold Rolled Non Alloy/Alloy Steel Hardened and Tempered Saw Blades/Handsaw Blades
|
|
| C0916 |
|
Pneumatic tool
|
|
| C0917 |
|
Cutting Tools - Single point of High Speed Steel (Cobalt Grade)
|
|
| C0918 |
|
Cutting tools - Single point of High Speed Steel (Non-cobalt Grade)
|
|
| C0919 |
|
Deleted
|
|
| C0920 |
|
Cutting Tools - Multiple point of high Speed Steel (Non-cobalt Grade)/Tool Steel
|
|
| C0921 |
|
Cutting Tools - multiple point of High Speed steel (Cobalt Grade)/Tool Steel
|
|
| C0922 |
|
Electric Discharge Machine(EDM) Wire
|
|
| C0923 |
|
Endless Coated Abrasive Belts/ Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 100-220
|
|
| C0924 |
|
Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 24-30
|
|
| C0925 |
|
Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 36-40
|
|
| C0926 |
|
Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 50-80
|
|
| C0927 |
|
Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 240 and above
|
|
| C0928 |
|
Fix Perfect Inserts for Milling and Turning
|
|
| C0929 |
|
Gear cutting tools of cobalt bearing high speed steel
|
|
| C0930 |
|
High speed steel square, Rectangular and Round Cobalt & Non-Cobalt Grade Tool Bits of Cross Sectional Area more than 150 Sq.mm.
|
|
| C0931 |
|
Industrial Diamond Prod. Diamond Grinding Wheels/ diamond file and tools
|
|
| C0932 |
|
Industrial Diamond Prod. Diamond Tools/ Diamond dressers/ Diamond tools bits
|
|
| C0933 |
|
Industrial Diamond/CBN Grinding Wheels
|
|
| C0934 |
|
ISO Indexable Inserts For Turning, Milling and Drilling
|
|
| C0935 |
|
NC/CNC Wire Cut Electric Discharge Machine
|
|
| C0936 |
|
Organic Grinding Wheels: All other wheels Grain Bond Ratio 75:25
|
|
| C0937 |
|
Organic Grinding Wheels: Depressed Centre Wheels Grain Bond Ratio 75:25
|
|
| C0938 |
|
Organic Grinding Wheels: Hot Press Wheels for Billet Grinding Grain Bond Ratio 75:25
|
|
| C0939 |
|
Organic Grinding Wheels: Non-Reinforced Cutting off wheels Grain Bond Ratio 75:25
|
|
| C0940 |
|
Organic Grinding Wheels: Nut Inserted wheels Grain Bond Ratio 88:12
|
|
| C0941 |
|
Organic Grinding Wheels: Point & Fluting Grain Bond Ratio 65:35
|
|
| C0942 |
|
Organic Grinding Wheels: Razor Blade Grinding wheel Grain Bond Ratio 85:15
|
|
| C0943 |
|
Organic Grinding Wheels: Reinforced Cutting off wheel Grain Bond Ratio 75:25
|
|
| C0944 |
|
Organic Grinding Wheels: Snagging wheels Grain Bond Ratio 75:25
|
|
| C0945 |
|
PCB Drills made from Solid Tungsten Carbide Blanks/ Rods of Diameter 1.51 mm to 6.50 mm
|
|
| C0946 |
|
PCB Router made from Solid Tung- sten Carbide Blanks
|
|
| C0947 |
|
Permanent Magnetic Chuck
|
|
| C0948 |
|
Plastic Injection Mould made of Steel
|
|
| C0949 |
|
Pneumatic Revetting hammer
|
|
| C0950 |
|
Resin bonded diamond wheels (Quantity of diamond powder contained in export Product should be mentioned)
|
|
| C0951 |
|
Saws/ Segments made from high speed steel strips/ sheets including Bimetal & Flexible
|
|
| C0952 |
|
Screw Drivers (Nickel plated)
|
|
| C0953 |
|
Slitting cutters made of steel variety-x
|
|
| C0954 |
|
Vetrified Grinding wheels : Mounted Points Grin Bond Ratio 85:15
|
|
| C0955 |
|
Vetrified Grinding Wheels: All other Vetrified Grinding Wheels Grain Bond Ratio 85:15
|
|
| C0956 |
|
Vetrified Grinding Wheels: Ball Wheels Grain Bond Ratio 60:40
|
|
| C0957 |
|
Vetrified Grinding Wheels: Floor Polishing Blocks, Rubbing Bricks, Finishing Stone, Segments Grain Bond Ratio 85:15
|
|
| C0958 |
|
Vetrified Grinding Wheels: Honing Stone/Super Finishing Stones Grain Bond Ratio 85:15
|
|
| C0959 |
|
Welded Construction tools made of High speed steel in combination with other steels namely Twist drills/ Reamers/ Threading tools/ End mills/ Milling cutters/ Taps
|
|
| C0960 |
|
Above 95 CC and upto 175 CC 4 Stroke Motorcycle in CKD/SKD/CBU Condition
|
|
| C0961 |
|
Above 175 CC and upto 250 CC Motorcycles in CBU/ SKD/ CKD condition
|
|
| C0962 |
|
Deleted
|
|
| C0963 |
|
Above 250 CC and upto 500 CC Motorcycles in CBU/ SKD/ CKD condition
|
|
| C0964 |
|
49 CC Moped
|
|
| C0965 |
|
45 CC to 60 CC Scooter in CKD/SKD/CBU Condition
|
|
| C0966 |
|
Above 60 CC and upto 100 CC Scooter in CKD/SKD/CBU Condition
|
|
| C0967 |
|
45 CC to 75 CC Motorcycles in CBU/SKD/CKD condition
|
|
| C0968 |
|
Above 75 CC and upto 100 CC Motorcycle in CKD/SKD/CBU Condition
|
|
| C0969 |
|
Agricultural Tractor in CKD/ SKD/ CBU/ SKID condition thereof
|
|
| C0970 |
|
Alternator Assembly
|
|
| C0971 |
|
Aluminium Pistons, exported in fully machined condition
|
|
| C0972 |
|
Steel Anchor Pin
|
|
| C0973 |
|
Armature for Delcoremy type motor
|
|
| C0974 |
|
Armature for Dynamo
|
|
| C0975 |
|
Asbestos brakelinings with Brass chips
|
|
| C0976 |
|
Asbestos brakelinings without Brass chips
|
|
| C0977 |
|
Asbestos Clutch Facings
|
|
| C0978 |
|
Asbestos Disc Brake Pads
|
|
| C0979 |
|
Asbestos Free brakelinings with Brass chips
|
|
| C0980 |
|
Asbestos Free brakelinings with Nitrile Rubber
|
|
| C0981 |
|
Asbestos Moulded Non-Metallic Brake Lining
|
|
| C0982 |
|
Asbestos Moulded Clutch Facings
|
|
| C0983 |
|
Automobile Tyre-Tube Valves
|
|
| C0984 |
|
Automotive Radiator Core (Copper/Brass construction)
|
|
| C0985 |
|
Automotive Radiators made of Copper and Brass
|
|
| C0986 |
|
Automotive timing chain
|
|
| C0987 |
|
Automotive Timing Chains for four wheeler application
|
|
| C0988 |
|
Automotive Water Pump
|
|
| C0989 |
|
Axle Shaft
|
|
| C0990 |
|
BB Axle
|
|
| C0991 |
|
Brake shoe plate
|
|
| C0992 |
|
Bronze/ Gun Metal Impellers for pumps, all types
|
|
| C0993 |
|
Cam
|
|
| C0994 |
|
Cam Shaft
|
|
| C0995 |
|
CBH Flate for starter motor
|
|
| C0996 |
|
Chain Cover Hinges Shakle Plates made of CRCA Sheet
|
|
| C0997 |
|
Cluch Cover Assembly
|
|
| C0998 |
|
Clutch Plate/Disc Assembly/Driven Plate
|
|
| C0999 |
|
Commutator
|
|
| C1000 |
|
Cone Sleeve/Axle Stud sleeve
|
|
| |
|
| |
| |
9911796707
